Beaver dam analogues drive heterogeneous groundwater–surface water interactions

Beaver dam analogues (BDAs) are a cost-effective stream restoration approach that leverages the recognized environmental benefits of natural beaver dams on channel stability and local hydrology. Although natural beaver dams are known to exert considerable influence on the hydrologic conditions of a stream system by mediating geomorphic processes, nutrient cycling, and groundwater–surface water interactions, the impacts of beaver-derived restoration methods on groundwater–surface water exchange are poorly characterized. To address this deficit, we monitored hyporheic exchange fluxes and streambed porewater biogeochemistry across a sequence of BDAs installed along a central Wyoming stream during the summer of 2019. Streambed fluxes were quantified by heat tracing methods and vertical hydraulic gradients. Biogeochemical activity was evaluated using major ion porewater chemistry and principal component analysis. Vertical fluxes of approximately 1.0 m/day were observed around the BDAs, as was the development of spatially heterogeneous zones of nitrate production, groundwater upwelling, and anaerobic reduction. Strong contrasts in hyporheic zone processes were observed across BDAs of differing sizes. This suggests that structures may function with size-dependent behaviour, only altering groundwater–surface water interactions after a threshold hydraulic step height is exceeded. Patterns of hyporheic exchange and biogeochemical cycling around the studied BDAs resemble those around natural beaver dams, suggesting that BDAs may provide comparable benefits to channel complexity and near-stream function over a 1-year period.     

Influence of large-diameter pipe pile driving on surrounding marine soils and adjacent submarine pipelines

Abstract

With the large-scale development and utilization of ocean resources and space, it is inevitable to encounter existing submarine facilities in pile driving areas, which necessitates a safety assessment. In this article, by referring to a wharf renovation project as a reference, the surrounding soil response and buried pipe deformation during pile driving in a near-shore submarine environment are investigated by three-dimensional (3D) numerical models that consider the pore water effect. Numerical studies are carried out in two different series: one is a case of a single pile focusing on the effect of the minimum plane distance of the pile–pipe, and the other is a case of double piles focusing on the effect of the pile spacing.     

An unsteady wave driver for narrowbanded waves: modeling nearshore circulation driven by wave groups

In this paper, we derive an unsteady refraction–diffraction model for narrowbanded water waves for use in computing coupled wave–current motion in the nearshore. The end result is a variable coefficient, nonlinear Schrödinger-type wave driver (describing the envelope of narrow-banded incident waves) coupled to forced nonlinear shallow water equations (describing steady or unsteady mean flows driven by the short-wave field). Comparisons with experimental data show that good accuracy can be obtained for cases of nonbreaking wave transformation. Numerical simulations show that the interaction of wave groups with longshore topographic nonuniformities generates strong edge wave resonances, providing a generating mechanism for low-order edge waves.     

Mais comment s'écoule donc un glacier ? Aperçu historique

Ice and snow have often helped physicists understand the world. On the contrary it has taken them a very long time to understand the flow of the glaciers. Naturalists only began to take an interest in glaciers at the beginning of the 19th century during the last phase of glacier advances. When the glacier flow from the upslope direction became obvious, it was then necessary to understand how it flowed. It was only in 1840, the year of the Antarctica ice sheet discovery by Dumont d'Urville, that two books laid the basis for the future field of glaciology: one by Agassiz on the ice age and glaciers, the other one by canon Rendu on glacier theory. During the 19th century, ice flow theories, adopted by most of the leading scientists, were based on melting/refreezing processes. Even though the word ‘fluid’ was first used in 1773 to describe ice, more the 130 years would have to go by before the laws of fluid mechanics were applied to ice. Even now, the parameter of Glen's law, which is used by glaciologists to model ice deformation, can take a very wide range of values, so that no unique ice flow law has yet been defined. To cite this article: F. Rémy, L. Testut, C. R. Geoscience 338 (2006).     

A hybrid indirect boundary element—discrete wave number method applied to simulate the seismic response of stratified alluvial valleys

A hybrid indirect boundary element – discrete wavenumber method is presented and applied to model the ground motion on stratified alluvial valleys under incident plane SH waves from an elastic half-space. The method is based on the single-layer integral representation for diffracted waves. Refracted waves in the horizontally stratified region can be expressed as a linear superposition of solutions for a set of discrete wavenumbers. These solutions are obtained in terms of the Thomson–Haskell propagators formalism. Boundary conditions of continuity of displacements and tractions along the common boundary between the half-space and the stratified region lead to a system of equations for the sources strengths and the coefficients of the plane wave expansion. Although the regions share the boundary, the discretization schemes are different for both sides: for the exterior region, it is based on the numerical and analytical integration of exact Green's functions for displacements and tractions whereas for the layered part, a collocation approach is used. In order to validate this approach results are compared for well-known cases studied in the literature. A homogeneous trapezoidal valley and a parabolic stratified valley were studied and excellent agreement with previous computations was found. An example is given for a stratified inclusion model of an alluvial deposit with an irregular interface with the half-space. Results are displayed in both frequency and time domains. These results show the significant influence of lateral heterogeneity and the emergence of locally generated surface waves in the seismic response of alluvial valleys.     

‘Committing to Place’ at the Local Scale: the potential of youth education programs for promoting community participation in regional natural resource management

Emerging approaches to environmental governance require a greater level of community participation than did previous approaches in which these responsibilities largely rested with government agencies. There is consequently a need for increased engagement with NRM among a broad community sector. This paper examines initiatives by two prominent government agencies, the Murray–Darling Basin Commission (MDBC) and the National Museum of Australia (NMA), to engage school children from regional communities using education programs that focus on place and environmental health. We focus on the MDBC's International Riverhealth Conference held in Mildura in 2003 and the associated Murray–Darling Basin TalkBack Classroom sponsored by the NMA and the Parliamentary Education Office (PEO). We explore how key themes of local scale, place-based identities, youth voice and critical engagement are developed in these programs and consider how they relate to the environmental agency of children. We then reflect on the potential for the kinds of environmental agency promoted through these programs to help build the capacity of local communities to progress larger goals of environmental restoration and sustainability in the Murray–Darling Basin. The evaluation research reported here forms part of the Committing to Place research project, an Australian Research Council Linkage grant involving the University of Tasmania, the National Museum of Australia and the Murray–Darling Basin Commission.     

The crystal and magnetic structure of Li-aegirine LiFe3+Si2O6: a temperature-dependent study

Single crystals of Li-aegirine LiFe³⁺Si₂O₆ were synthesized at 1573?K and 3?GPa, and a polycrystalline sample suitable for neutron diffraction was produced by ceramic sintering at 1223?K. LiFe³⁺Si₂O₆ is monoclinic, space group C2/c, a=9.6641(2)?Å, b= 8.6612(3)?Å, c=5.2924(2)?Å, β=110.12(1)^° at 300?K as refined from powder neutron data. At 229?K Li-aegirine undergoes a phase transition from C2/c to P2₁ /c. This is indicated by strong discontinuities in the temperature variation of the lattice parameters, especially for the monoclinic angle β and by the appearance of Bragg reflections (hkl) with h+k≠2n. In the low-temperature form two non-equivalent Si-sites with 〈SiA–O〉=1.622?Å and 〈SiB–O〉=1.624?Å at 100?K are present. The bridging angles of the SiO₄ tetrahedra O3–O3–O3 are 192.55(8)° and 160.02(9)° at 100?K in the two independent tetrahedral chains in space group P2₁ /c, whereas it is 180.83(9)° at 300?K in the high-temperature C2/c phase, i.e. the chains are nearly fully expanded. Upon the phase transition the Li-coordination changes from six to five. At 100?K four Li–O bond lengths lie within 2.072(4)–2.172(3)?Å, the fifth Li–O bond length is 2.356(4)?Å, whereas the Li–O3?A bond lengths amount to 2.796(4)?Å. From ⁵⁷Fe Mössbauer spectroscopic measurements between 80 and 500?K the structural phase transition is characterized by a small discontinuity of the quadrupole splitting. Temperature-dependent neutron powder diffraction experiments show first occurrence of magnetic reflections at 16.5?K in good agreement with the point of inflection in the temperature-dependent magnetization of LiFe³⁺Si₂O₆. Distinct preordering phenomena can be observed up to 35?K. At the magnetic phase transition the unit cell parameters exhibit a pronounced magneto-striction of the lattice. Below T _N Li-aegirine shows a collinear antiferromagnetic structure. From our neutron powder diffraction experiments we extract a collinear antiferromagnetic spin arrangement within the a–c plane.     

X射线荧光光谱法分析不同类型岩石中10种主量元素的测试能力验证

以28个不同类型岩石标样作外标,用玻璃熔片法制样,采用经验系数法进行基体校正,建立了X射线荧光光谱法(XRF)测定不同类型岩石中硅铝钙镁等10种主量元素的分析方法。该方法被用于参与GeoPT分析测试能力验证,15年来分析了23个不同类型的岩石验证样品。经验证该方法对SiO_2、Al_2O_3、K_2O和CaO具有非常好的分析效果(所有测定结果的|Z|2);对于MgO、MnO、TiO_2和Na_2O四个元素,尽管各有一个样品的分析结果的|Z|2,这主要是样品与标样的基体差异较大造成了低含量样品测定结果超差,但依然可获得好的分析效果;当TFe_2O_31.0%,P_2O_5含量在0.08%~0.80%区间时,分析结果的|Z|2,满足分析期望。总体上所建立的XRF分析方法稳定,可满足应用地球化学实验室测试不同类型岩石中10种主量元素的分析期望。     

壳聚糖和PDMDAAC改性膨润土用于处理含油废水的研究

含油废水污染范围广,对人类和生态环境危害大。采用常规方法(如浮选法、絮凝法、电化学法、膜分离法和生物法)处理的除油率不高于91%,成本较高,因此急需开发一种高效低廉的吸附剂。膨润土是一种优良的吸附剂,但用其直接处理含油废水的效果较低。本文选用壳聚糖和PDMDAAC两种有机物作为改性剂,对钠基膨润土改性,使膨润土能有效地处理含油废水。通过实验比较了两种有机改性膨润土处理含油废水的最佳去除条件,探讨了表征对其吸附性能的影响。去油效果结果表明:壳聚糖改性膨润土的除油率可达87.8%,PDMDAAC改性膨润土的除油率可达89.3%,处理所需时间少于15 min;除油效率和处理时间都优于常规方法。吸附性能表征结果显示,两种改性剂均以负载的方式和钠基膨润土颗粒结合,吸附性能良好;相比而言,PDMDAAC改性膨润土的处理效果比壳聚糖改性膨润土更好。PDMDAAC应用于含油废水的处理,具有成本低、效率高、操作简单的特点,在含油废水处理领域具有较好的应用前景。     

Geological and C–O–S–Pb–Sr isotopic constraints on the origin of the Qingshan carbonate-hosted Pb–Zn deposit,Southwest China

Located in the western Yangtze Block, the Qingshan Pb–Zn deposit, part of the Sichuan–Yunnan–Guizhou Pb–Zn metallogenic province, contains 0.3 million tonnes of 9.86 wt.% Pb and 22.27 wt.% Zn. Ore bodies are hosted in Carboniferous and Permian carbonate rocks, structurally controlled by the Weining–Shuicheng anticline and its intraformational faults. Ores composed of sphalerite, galena, pyrite, dolomite, and calcite occur as massive, brecciated, veinlets, and disseminations in dolomitic limestones.

The C–O isotope compositions of hydrothermal calcite and S–Pb–Sr isotope compositions of Qingshan sulphide minerals were analysed in order to trace the sources of reduced sulphur and metals for the Pb–Zn deposit. δ¹³C_PDB and δ¹⁸O_SMOW values of calcite range from –5.0‰ to –3.4‰ and +18.9‰ to +19.6‰, respectively, and fall in the field between mantle and marine carbonate rocks. They display a negative correlation, suggesting that CO₂ in the hydrothermal fluid had a mixed origin of mantle, marine carbonate rocks, and sedimentary organic matter. δ³⁴S values of sulphide minerals range from +10.7‰ to +19.6‰, similar to Devonian-to-Permian seawater sulphate (+20‰ to +35‰) and evaporite rocks (+23‰ to +28‰) in Carboniferous-to-Permian strata, suggesting that the reduced sulphur in hydrothermal fluids was derived from host-strata evaporites. Ores and sulphide minerals have homogeneous and low radiogenic Pb isotope compositions (²⁰⁶Pb/²⁰⁴Pb = 18.561 to 18.768, ²⁰⁷Pb/²⁰⁴Pb = 15.701 to 15.920, and ²⁰⁸Pb/²⁰⁴Pb = 38.831 to 39.641) that plot in the upper crust Pb evolution curve, and are similar to those of Devonian-to-Permian carbonate rocks. Pb isotope compositions suggest derivation of Pb metal from the host rocks. ⁸⁷Sr/⁸⁶Sr ratios of sphalerite range from 0.7107 to 0.7136 and (⁸⁷Sr/⁸⁶Sr)_200Ma ratios range from 0.7099 to 0.7126, higher than Sinian-to-Permian sedimentary rocks and Permian Emeishan flood basalts, but lower than Proterozoic basement rocks. This indicates that the ore strontium has a mixture source of the older basement rocks and the younger cover sequence. C–O–S–Pb–Sr isotope compositions of the Qingshan Pb–Zn deposit indicate a mixed origin of the ore-forming fluids and metals.