Structural characterization of deep-water deposits in a foreland basin, Silla Syncline (Chilean Patagonia), with applications to depositional processes

Based on our detailed structural characterization, we examine possible relationships between thrust faults and strike-slip faults and thrust-cored folds and depositional units in the Silla Syncline, a 4 km wide fold composed of fine-grained mudstone, coarse sandstone and conglomerate deposits of the Cerro Toro Formation in the Magallanes foreland basin, Chilean Patagonia. The syncline is bounded on its western flank by an asymmetric anticline and on its eastern flank by a broad zone of thrust faults and associated folds, which are oriented sub-parallel to the syncline axis. Deposition of the coarse-grained units of the Silla Syncline appears to have taken place in this structurally defined trough controlled primarily by thrust fault related growth structures flanking the syncline.The syncline and surrounding area have also been deformed by two sets of strike-slip faults, one right-lateral and one left-lateral. The strike-slip and thrust faulting operated contemporaneously for much of their active periods, although it appears that thrust faulting, confined within the fine-grained units, initiated slightly earlier than strike-slip faulting. In addition, younger igneous intrusions at high angle to bedding generally localize along the strike-slip faults. The cross-cutting relationships among the intrusions, strike-slip faults, and flexural slip faults show that all these structures were active during the same period, which extends beyond mid-Miocene.These conclusions support the premise that structures in deep-water sediments are important for understanding not only the deformation of a foreland basin, but also its depositional architecture.     

河口涨落潮槽水动力特征及河槽类型判定

在前人对河口冲刷槽研究的基础上,选择长江口南支、新桥水道、南小泓和南港主槽作为典型涨、落潮槽研究对象,以2001年洪季和2003年枯季实测资料为根据,比较分析了长江口涨落潮槽的水流、泥沙、优势流和优势沙等动力特征,结果表明用单一因子分析河槽性质不够全面.提出了一个(无量纲因子)河槽类型系数(λ)来综合表述河槽的多种水文泥沙特征,可以较全面地用多个影响因子来合理地判断河槽类型.     

黄河三角洲桩西101站潮沟地貌形态及其水动力学研究

在潮沟下游，横跨且生趣与潮沟的横断面设了５个观测站，进行了２４ｈ的水动力测量。结果表明，涨落潮流速流向不对称，在潮沟内，涨落潮流流速差别很大，涨潮流流速最大为９ｃｍ／２，而落潮流流速最大可达３８ｃｍ／ｓ。据推测，潮沟内之所以落潮流流速明显大于涨潮流流速，可能是由于潮沟与岸线斜交有关。     

The Equatorial Atlantic Mid-Ocean Channel: An Ultra High-Resolution Image of Its Burial History Based on TOPAS Profiles

Multibeam bathymetric and ultra high-resolution seismic data reveal that the distal course of the Equatorial Atlantic Mid-Ocean Channel (EAMOC) extends further east and south than was previously known, and is controlled by the presence of morphologic highs related to the Fernando de Noronha Fracture Zone. Distal course of the EAMOC is buried by sediments, and does not have bathymetric expression on the seafloor. The channel fill consists of three seismic sequences, suggesting that the recent geological evolution of the channel is composed of successive phases of decreasing sedimentary activity that finally resulted in its complete burial. Tectonic and volcanic activity related to the Fernando de Noronha Fracture Zone and Ridge, together with the effect of strong pulses of the Antarctic bottom water current during the upper Pliocene are suggested to have contributed to the progressive burial and the final abandonment of the EAMOC.     

Effects of high-order nonlinear interactions on unidirectional wave trains

Numerical simulations of gravity waves with high-order nonlinearities in two-dimensional domain are performed by using the pseudo spectral method. High-order nonlinearities more than third order excite apparently chaotic evolutions of the Fourier energy in deep water random waves. The high-order nonlinearities increase kurtosis, wave height distribution and H_max/H_1/3 in deep water and decrease these wave statistics in shallow water. Moreover, they can generate a single extreme high wave with an outstanding crest height in deep water. High-order nonlinearities (more than third order) can be regarded as one cause of freak waves in deep water.     

Mean flow and variability in the southwestern East Sea

The Ulleung Basin is one of three deep basins that are contained within the East/Japan Sea. Current meter moorings have been maintained in this basin beginning in 1996. The data from these moorings are used to investigate the mean circulation pattern, variability of deep flows, and volume transports of major water masses in the Ulleung Basin with supporting hydrographic data and help from a high-resolution numerical model. The bottom water within the Ulleung Basin, which must enter through a constricted passage from the north, is found to circulate cyclonically—a pattern that seems prevalent throughout the East Sea. A strong current of about 6 cms⁻¹ on average flows southward over the continental slope off the Korean coast underlying the northward East Korean Warm Current as part of the mean abyssal cyclonic circulation. Volume transports of the northward East Korean Warm Current, and southward flowing East Sea Intermediate Water and East Sea Proper Water are estimated to be 1.4 Sv (1 Sv=10⁻⁶ m³ s⁻¹), 0.8 Sv, and 3.0–4.0 Sv, respectively. Deep flow variability involves a wide range of time scales with no apparent seasonal variations, whereas the deep currents in the northern East Sea are known to be strongly seasonal.     

Sedimentary Features of Shallow Ancient River Channels on the Northern Shelf of the South China Sea

Quaternary buried ancient river channels are widespread in the shallow-level sediments of the northern shelf of the South China Sea. The sedimentary sequence mainly of fluvial deposits comprise an important component part of the low-stand system tract and transgressive system tract in the study region. The plannar variation and spatial association of the sedimentary features such as incised valley fillings, deltaic foreset wedges and block slides of shelf-marginal fans reflect the palaeogeographic environment during the fall of the regional sea level in the northern part of the South China Sea. Based on the high-resolution seismic reflection data and gelogical data from boreholes, the present paper makes an integrated interpretation of the Quaternary ancient river channels in the shallow sediments of the study area, studies the sedimentary features of the ancient channels such as their spatial distribution, seismic facies reflection indicators, sedimentary facies and sand -body types, and discusses thei     

Anatomy of shelf deltas at the edge of a prograding Eocene shelf margin, Spitsbergen

Abstract Although shelf‐edge deltas are well‐imaged seismic features of Holocene and Pleistocene shelf margins, documented outcrop analogues of these important sand‐prone reservoirs are rare. The facies and stratigraphic architecture of an outcropping shelf‐edge delta system in the Eocene Battfjellet Formation, Spitsbergen, is presented here, as well as the implications of this delta system for the generation of sand‐prone, shelf‐margin clinoforms. The shelf‐edge deltas of the Battfjellet Formation on Litledalsfjellet and Høgsnyta produced a 3–5 × 15 km, shelf edge‐attached, slope apron (70 m of sandstones proximally, tapering to zero on the lower slope). The slope apron consists of distributary channel and mouth‐bar deposits in its shelf‐edge reaches, passing downslope to slope channels/chutes that fed turbiditic lobes and spillover sheets. In the transgressive phase of the slope apron, estuaries developed at the shelf edge, and these also produced minor lobes on the slope. The short‐headed mountainous rivers that drained the adjacent orogenic belt and fed the narrow shelf, and the shelf‐edge position of the discharging deltas, made an appropriate setting for the generation of hyperpycnal turbidity currents on the slope of the shelf margin. The abundance of organic matter and of coal fragments in the slope turbidites is consistent with this notion. Evidence that many of the slope turbidites were generated by sustained turbidity currents that waxed then waned includes the presence of scour surfaces and thick intervals of plane‐parallel laminae within turbidite beds in the slope channels, and thick spillover lobes with repetitive alternations of massive and flat‐laminated intervals. The examined shelf‐edge to slope system, now preserved mainly below the shelf break and dominated by sediment gravity‐flow deposits, has a threefold stratigraphic architecture: a lower, progradational part, in which the clinoforms have a slight downward‐directed trajectory; a thin aggradational zone; and an upper part in which clinoforms backstep up onto the shelf edge. A greatly increased density of erosional channels and chutes marks the regressive‐to‐transgressive turnaround within the slope apron, and this zone becomes an angular unconformity up near the shelf edge. This unconformity, with both subaerial and subaqueous components, is interpreted as a sequence boundary and developed by vigorous sand delivery and bypass across the shelf edge during the time interval of falling relative sea level. The studied shelf‐margin clinoforms accreted mostly during falling stage (sea level below the shelf edge), but the outer shelf later became estuarine as sea level became re‐established above the shelf edge.     

Contrasting rifted margin styles south of Greenland: implications for mantle plume dynamics

We present new and reprocessed seismic reflection data from the area where the southeast and southwest Greenland margins intersected to form a triple junction south of Greenland in the early Tertiary. During breakup at 56 Ma, thick igneous crust was accreted along the entire 1300-km-long southeast Greenland margin from the Greenland Iceland Ridge to, and possibly 100 km beyond, the triple junction into the Labrador Sea. However, highly extended and thin crust 250 km to the west of the triple junction suggests that magmatically starved crustal formation occurred on the southwest Greenland margin at the same time. Thus, a transition from a volcanic to a non-volcanic margin over only 100–200 km is observed. Magmatism related to the impact of the Iceland plume below the North Atlantic around 61 Ma is known from central-west and southeast Greenland. The new seismic data also suggest the presence of a small volcanic plateau of similar age close to the triple junction. The extent of initial plume-related volcanism inferred from these observations is explained by a model of lateral flow of plume material that is guided by relief at the base of the lithosphere. Plume mantle is channelled to great distances provided that significant melting does not take place. Melting causes cooling and dehydration of the plume mantle. The associated viscosity increase acts against lateral flow and restricts plume material to its point of entry into an actively spreading rift. We further suggest that thick Archaean lithosphere blocked direct flow of plume material into the magma-starved southwest Greenland margin while the plume was free to flow into the central west and east Greenland margins. The model is consistent with a plume layer that is only moderately hotter, 100–200°C, than ambient mantle temperature, and has a thickness comparable to lithospheric thickness variations, 50–100 km. Lithospheric architecture, the timing of continental rifting and viscosity changes due to melting of the plume material are therefore critical parameters for understanding the distribution of magmatism.     

Effects of peat on the shapes of alluvial channels: examples from the Cumberland Marshes, Saskatchewan, Canada

An avulsion of the lower Saskatchewan River in the 1870s inundated a large segment of peat-covered floodplain that subsequently has become aggraded with a broad (500 km²) belt of alluvium deposited by the redirected flow. Routing of water and sediment discharge through the avulsion-affected area has been accomplished mainly by networks of sandy bedded anastomosed channels that have formed, evolved, and abandoned as the alluvial belt prograded down the floodplain slope. These processes continue today, though at a much-reduced rate. New channels, formed by crevassing and basinward extension of distributaries, are initially small and shallow, with bottom elevations situated within the avulsive alluvium but above the pre-avulsion peat (floodplain) surface. Subsequent enlargement and downcutting of many of these channels eventually uncovers the underlying peat layer whose resistance to erosion exerts significant influence on cross-sectional shape and further channel development. Peat-floored channels tend to have rectangular cross-sections, high ratios of average to maximum depth (D/D_max), and a large range of width-to-depth ratios. If the channel continues to enlarge, the peat layer eventually becomes breached, commonly leading to temporarily irregular cross-sections caused by localized scouring at the breach sites. Eventually, the peat layer is completely eroded from the channel floor by undercutting and slumping, after which channel shape becomes governed mainly by other perimeter characteristics. Channels unaffected by peat, either before the peat layer is encountered during early channel development or after it is entirely removed, tend to have low width/depth ratios and a large range of D/D_max values.