Breaking wave loads at vertical seawalls and breakwaters

This paper presents recent advances in knowledge on wave loads, based on experimental work carried out in the CIEM/LIM large flume at Barcelona within the framework of the VOWS (Violent Overtopping by Waves at Seawalls) project. Both quasi-static and impact wave forces from the new data set have been compared with predictions by empirical and analytical methods. The scatter in impact forces has been found to be large over the whole range of measurements, with no existing method giving especially good predictions. Based on general considerations, a simple and intuitive set of prediction formulae has been introduced for quasi-static and impact forces, and overturning moments, giving good agreement with the new measurements. New prediction formulae have been compared with previous measurements from physical model tests at small and large scale, giving satisfactory results over a relatively wide range of test conditions. The time variation of wave impacts is discussed, together with pressure distribution up the wall, which shows that within experimental limitations the measured pressures are within existing limits of previous study.     

Generalized failure envelope for caisson foundations in cohesive soil: Static and dynamic loading

The response of massive caisson foundations to combined vertical (N), horizontal (Q) and moment (M) loading is investigated parametrically by a series of three-dimensional finite element analyses. The study considers foundations in cohesive soil, with due consideration to the caisson-soil contact interface conditions. The ultimate limit states are presented by failure envelopes in dimensionless and normalized forms and the effects of the embedment ratio, vertical load and interface friction on the bearing capacity are studied in detail. Particular emphasis is given on the physical and geometrical interpretation of the kinematic mechanisms that accompany failure, with respect to the loading ratio M/Q. Exploiting the numerical results, analytical expressions are derived for the capacities under pure horizontal, moment and vertical loading, for certain conditions. For the case of fully bonded interface conditions, comparison is given with upper bound limit equilibrium solutions based on Brinch Hansen theory for the ultimate lateral soil reaction. A generalized closed-form expression for the failure envelope in M–Q–N space is then proposed and validated for all cases examined. It is shown that the incremental displacement vector of the caisson at failure follows an associated flow rule, with respect to the envelope, irrespective of: (a) the caisson geometry, and (b) the interface conditions. A simplified geometrical explanation and physical interpretation of the associativity in M-Q load space is also provided. Finally, the derived failure envelope is validated against low (0.67 Hz) and high frequency (5 Hz) dynamic loading tests and the role of radiation damping on the response of the caisson at near failure conditions is unraveled.     

Evaluation of wave impact loads on caisson breakwaters based on joint probability of impact maxima and rise times

When waves break against seawalls, vertical breakwaters, piers or jetties, they abruptly transfer their momentum into the structure. This energy transfer is always spectacular and perpetually unrepeatable but can also be very violent and affect the stability and the integrity of coastal structures. Over the last 15 years, increasing awareness of wave-impact induced structural failures of maritime structures has emphasised the need for a more complete approach to dynamic responses, including effects of impulsive loads. At the same time, movement of design standards toward probabilistic approaches requires new statistical tools able to account for uncertainties in the variability of wave loading processes. This paper presents a new approach to the definition of loads for use in performance design of vertical coastal structures subject to breaking wave impacts.     

Caisson breakwaters embodying an OWC with a small opening—Part II: A small-scale field experiment

A common and intuitive idea is that, before an absorbing breakwater, waves are smaller than before a conventional reflecting breakwater. The theory of Part I has shown that, on the contrary, before a breakwater converter, in some cases, the wave height may be greater than before a conventional reflecting breakwater. Now, an experiment off the eastern coast of the Straits of Messina provides a confirmation of the theory: some huge amplifications of swells are common at a breakwater converter, and as a consequence the energy absorption gets very large. Here, we show the results of the experiment, and, basing ourselves on these results and on the theory of Part I, we suggest some practical way of calculation.     

Simplified analytical solutions for wave interaction with absorbing-type caisson breakwaters

Simplified analytical solutions are presented to model the interaction of linear waves with absorbing-type caisson breakwaters, which possess one, or two, perforated or slotted front faces which result in one, or two, interior fluid regions (chambers). The perforated/slotted surfaces are idealized as thin porous plates. Energy dissipation in the interior fluid region(s) inside the breakwater is modelled through a damping function. Under the assumption of potential flow and linear wave theory a boundary-value problem may then be formulated to describe wave interaction with the idealized structure. A solution to this simplified problem may be obtained by an eigenfunction expansion technique and an explicit analytical expression may be obtained for the reflected wave height. Using the experimental work of previous authors, damping coefficients are determined for both single and double chamber absorbing-type caisson breakwaters. Based on the damping for a single perforated-wall breakwater, a methodology is proposed to enable the estimation of the damping coefficients for a breakwater with two chambers. The theoretical predictions of the reflection coefficients for the two-chamber structures using the present model are compared with those obtained from laboratory experiments by other authors. It is found that the inclusion of the damping in the interior fluid region gives rise to improved agreement between theory and experiment.     

On a new wave energy absorber

It is a commonly held opinion that only a forced resonance is possible between random wind-generated waves and wave energy absorbers; the forced resonance being pursued by means of devices for phase control. We show, instead, that it is possible to obtain an impressive natural resonance between random wind-generated waves and a new kind of absorber beneath the sea level. The proof is given through a small scale field experiment. This finding should enable us to defend coasts with a very low environmental impact and to use breakwaters for converting large quantities of wave energy into electric power.     

Comparison between a U-OWC and a conventional OWC

With an additional vertical duct at the wave-beaten side, an OWC is expected to give some much better performances. This is, essentially, due to two reasons. First, an OWC with the additional vertical duct (U-OWC) has an eigenperiod greater than the eigenperiod of a conventional OWC. Second, the amplitude of the pressure fluctuations on the opening of a U-OWC is greater than the amplitude of the pressure fluctuations on the opening of a conventional OWC (the greater the smaller the wave period is). For the first reason, a U-OWC can give performances better than those of a conventional OWC both with swells and large wind waves. For the second reason, a U-OWC can give performances better than those of a conventional OWC also with small wind waves.     

Development of Winkler model for static and dynamic response of caisson foundations with soil and interface nonlinearities

As an extension of the elastic multi-spring model developed by the authors in a companion paper [Gerolymos N, Gazetas G. Winkler model for lateral response of rigid caisson foundations in linear soil. Soil Dyn Earthq Eng; 2005 (submitted companion paper).], this paper develops a nonlinear Winkler-spring method for the static, cyclic, and dynamic response of caisson foundations. The nonlinear soil reactions along the circumference and on the base of the caisson are modeled realistically by using suitable couple translational and rotational nonlinear interaction springs and dashpots, which can realistically (even if approximately) model such effects as separation and slippage at the caisson–soil interface, uplift of the caisson base, radiation damping, stiffness and strength degradation with large number of cycles. The method is implemented in a new finite difference time-domain code, NL-CAISSON. An efficient numerical methodology is also developed for calibrating the model parameters using a variety of experimental and analytical data. The necessity for the proposed model arises from the difficulty to predict the large-amplitude dynamic response of caissons up to failure, statically or dynamically. In a subsequent companion paper [Gerolymos N, Gazetas G. Static and dynamic response of massive caisson foundations with soil and interface nonlinearities—validation and results. Soil Dyn Earthq Eng; 2005 (submitted companion paper).], the model is validated against in situ medium-scale static load tests and results of 3D finite element analysis. It is then used to analyse the dynamic response of a laterally loaded caisson considering soil and interface nonlinearities.     

Winkler model for lateral response of rigid caisson foundations in linear soil

A generalized spring multi-Winkler model is developed for the static and dynamic response of rigid caisson foundations of circular, square, or rectangular plan, embedded in a homogeneous elastic. The model, referred to as a four-spring Winkler model, uses four types of springs to model the interaction between soil and caisson: lateral translational springs distributed along the length of the caisson relating horizontal displacement at a particular depth to lateral soil resistance (resultant of normal and shear tractions on the caisson periphery); similarly distributed rotational springs relating rotation of the caisson to the moment increment developed by the vertical shear tractions on the caisson periphery; and concentrated translational and rotational springs relating, respectively, resultant horizontal shear force with displacement, and overturning moment with rotation, at the base of the caisson. For the dynamic problem each spring is accompanied by an associated dashpot in parallel. Utilising elastodynamic theoretical available in the literature results for rigid embedded foundations, closed-form expressions are derived for the various springs and dashpots of caissons with rectangular and circular plan shape. The response of a caisson to lateral static and dynamic loading at its top, and to kinematically-induced loading arising from vertical seismic shear wave propagation, is then studied parametrically. Comparisons with results from 3D finite element analysis and other available theoretical methods demonstrate the reliability of the model, the need for which arises from its easy extension to multi-layered and nonlinear inelastic soil. Such an extension is presented in the companion papers by the authors [Gerolymos N, Gazetas G. Development of Winkler model for lateral static and dynamic response of caisson foundations with soil and interface nonlinearities. Soil Dyn Earthq Eng. Submitted companion paper; Gerolymos N, Gazetas G. Static and dynamic response of massive caisson foundations with soil and interface nonlinearities—validation and results. Soil Dyn Earthq Eng. Submitted companion paper.].     

Analysis on pore pressure in an anisotropic seabed in the vicinity of a caisson

This paper presents an analysis of pore pressure around a caisson-type breakwater subjected to dynamic wave loading. Unlike previous investigations for wave-seabed-caisson interaction, cross-anisotropic soil behaviour is considered in this paper. Based on a linear poro-elastic theory, a finite element model is developed. A parametric study related to the effects of wave parameters, soil characteristics and geometry of caisson and rubble mound base on the pore pressure around a caisson is performed. The numerical results indicate that the effects of anisotropic soil behaviour on the wave-induced pore pressure in a sandy bed beneath a caisson are not negligible.