松辽盆地三肇凹陷葡萄花油层成藏模式初探

运用源控含油气系统理论与综合分析技术,按成藏“层次分析”方法,通过对生、储、盖、圈(闭)静态要素及其内生、排、运、聚、散(失)动态过程的综合研究,对松辽盆地中央坳陷的三肇凹陷葡萄花油层成藏条件进行探讨,提出了以次级凹陷为中心、不同类型的油气聚集带紧邻并围绕次级凹陷最低部位呈环带状分布的大型凹陷内成藏模式,并进一步提出永乐次级凹陷中心及其三级聚油环带及徐家围子次级凹陷以西为"网式"运聚特征;在凹陷级成藏模式的指导下,通过对大面积密井网开发区综合解剖,提出三级构造带中单个的局部构造圈闭(群)、单个的(局部构造——)岩性圈闭(群)控油和成藏规律,为认识本区基本控油单元、油水分布规律、油气勘探及扩大新探区提供重要的理论依据。     

白云凹陷地球物理场及深部结构特征

珠江口盆地白云凹陷是南海最具代表性的第三系深水陆坡沉积区。以穿过白云凹陷中部的一条深反射地震剖面(14s)为研究基础，采用综合地球物理研究方法分析了该区地球物理场特征，根据重力异常平面等值线勾画了白云凹陷的形态，并提取该测线相对应的重磁剖面数据，利用重磁资料和地震剖面进行了综合反演。以深剖面地震资料建立了地质模型，利用所得的重力数据进行了研究深部结构的正演拟合，实测与计算值拟合较好，支持中生代俯冲洋壳存在的观点；同时结合地震资料对深部结构进行了分析，该区莫霍面由陆向海抬升，呈阶梯状变化，地壳厚度逐渐减薄，具有大陆边缘陆壳向洋壳过渡的特征。根据地质模型还进行了变密度综合反演拟合来分析基底岩性特征，该区基底主要为中酸性岩浆岩，部分为变质岩和基性火山岩，岩石密度由陆向洋逐渐减小，磁性体分布不均。     

苏北盆地泰州组砂岩成岩序列和储集层质量主控因素分析?

基于53口井310余块储集层砂岩样品的分析研究,指出泰州组储集层存在着压实(压溶)、胶结和溶蚀等成岩作用,但在不同位置成岩作用的表现有所不同。海安凹陷以胶结和溶蚀作用为主,压实与压溶作用不太明显;高邮凹陷的压实程度较海安凹陷强烈。压实作用使得高邮凹陷泰州组储集层孔隙度在2 400～2 800 m处于10%左右,而海安凹陷为10%～20%。海安凹陷和高邮凹陷泰州组储集层目前处于中成岩阶段A期。储集层质量主要受原始沉积环境和成岩作用的综合影响。压实作用和胶结作用均可降低孔隙,但当碳酸盐胶结物含量小于15％时,胶结作用对储集层质量影响较小。碳酸盐胶结物和长石颗粒溶蚀形成了大量的粒间溶孔。海安凹陷有利储集层主要分布在西北部和东部三角洲前缘砂体和滑塌浊积扇砂体中,高邮凹陷有利储集层主要分布在南部扇三角洲前缘砂体中。     

泌阳凹陷安棚油田深层系成岩作用研究及其在成岩圈闭预测中的应用

深层系一般指沉积盆地中埋藏深度在2 500～2 700 m以下的地层,其储集物性普遍很差,但在一定条件下,深部溶蚀作用可产生优质储层,形成成岩圈闭.然而这种成岩圈闭的预测一直是一个难题.安棚油田位于河南泌阳凹陷东南部,勘探成果表明,在该油田深层系下第三系核桃园组核三段下部(简称(核三下)席状的扇三角洲砂体中存在成岩圈闭.本次通过定量的成岩作用研究和成岩阶段划分,对成岩圈闭的形成机理和分布进行了探讨.研究表明,该区核三下的砂体经历了压实、胶结、溶蚀等多种成岩作用,不同的成岩作用发生于不同的埋藏深度.2 700～3 100 m之间以胶结强烈为特征,属于胶结带.3 100～3 900 m之间以次生溶蚀孔隙发育为特征,尤其是3 200～3 600 m之间, 属于深部溶蚀带.本区核三下砂体自南而北埋藏深度逐渐变浅,其上倾方向处于胶结带的部分由于强烈胶结而变成致密层,可封堵油气,而下倾方向处于溶蚀带的部分由于次生溶蚀孔隙发育而成为良好储层,从而形成成岩圈闭.根据不同埋藏深度、不同成岩阶段孔隙发育和保存的特征,可预测成岩圈闭分布。     

GRADIENT DISTRIBUTION OF ACID RAIN IN THE SCENIC RESORT OF THE BAIYUN MOUNTAIN IN GUANGZHOU

1 INTRODUCTION Sitting in the central part of the Pearl River Delta, Guangzhou is one of the cities in China that are most polluted by acid rain. Broad attention has been brought to the problem. Since the early 1980s, a series of observation and studies h…     

珠江口盆地白云凹陷新生代构造演化动力学

白云凹陷构造演化史的研究对在白云凹陷开展油气勘探和深水沉积研究具有重要的意义。通过对断裂与沉积结构平面和剖面特点的分析,结合岩浆活动特点,文中提出白云凹陷是一个复式地堑,推测这种结构特点与凹陷下地壳的强烈韧性减薄和颈缩变形有关,表现为热岩石圈的伸展。其发育机制推测与白云凹陷位于构造转换带上有关,特殊的构造位置使白云凹陷成为强烈构造变形区,岩石圈地壳强烈减薄,伴随伸展过程和地幔上涌,脆性地壳或上地幔中部分熔融物质的出现导致岩石圈强度的急剧降低,在区域伸展应力场下以韧性流变方式减薄。岩浆在构造转换带下聚集并发育主岩浆房,由于白云凹陷南北边缘没有发育正断裂系统,岩浆主要沿垂直伸展的方向运移,因此在珠琼运动一幕和二幕南南东向伸展应力作用下,岩浆向白云凹陷的东部和西部运移至北西向基底深大断裂处,那里由于北西向断裂表现为左行张剪性质而成为压力较低的地区,从而成为岩浆上涌和侵位的地方。在岩浆聚集的地区,活动岩浆体附近的脆性变形被分散的韧性变形所取代,因此在凹陷的东北和西南两个角上,发育了张性和张剪性小断裂群,由于热岩石圈弹性较差,白云凹陷长期持续沉降。白云凹陷的断裂活动和沉积演化史还受到南海海盆扩张活动的影响。     

Paleogene of the Huanghekou Sag in the Bohai Bay Basin,NE China: deposition–erosion response to a slope break system of rift lacustrine basins

The sequence architecture and depositional systems of the Paleogene lacustrine rift succession in the Huanghekou Sag, Bohai Bay Basin, NE China were investigated based on seismic profiles, combined with well log and core data. Four second‐order or composite sequences and seven third‐order sequences were identified. The depositional systems identified in the basin include: fan delta, braid delta, meander fluvial delta, lacustrine and sublacustrine fan. Identification of the slope break was conducted combining the interpretation of faults of each sequence and the identification of syndepositional faults, based on the subdivision of sequence stratigraphy and analysis of depositional systems. Multiple geomorphologic units were recognized in the Paleogene of the Huanghekou Sag including faults, flexures, depositional slope break belts, ditch‐valleys and sub‐uplifts in the central sag. Using genetic division principles and taking into consideration tectonic features of the Paleogene of the Huanghekou Sag, the study area was divided into the Northern Steep Slope/Fault Slope Break System, the Southern Gentle Slope Break System and T10 Tectonic Slope Break System/T10 Tectonic Belt. Responses of slope break systems to deposition–erosion are shown as: (1) basin marginal slope break is the boundary of the eroded area and provenance area; (2) ditch‐valley formed by different kinds of slope break belts is a good transport bypass for source materials; (3) shape of the slope break belt of the slope break system controls sediments types; (4) the ditch‐valley and sub‐sag of a slope break system is an unloading area for sediments; and (5) due to their different origins, association characteristics and developing patterns, the Paleogene slope break belt systems in the Huanghekou Sag show different controls on depositional systems. The Northern Fault Slope Break system controls the deposition of a fan delta‐lacustrine‐subaqueous fan, the Southern Gentle Slope Break system controls the deposition of a fluvial–deltaic–shallow lacustrine and sublacustrine fan, and the T10 Tectonic Slope Break System controls the deposition of shallow lacustrine beach bar sandbodies. The existence of a slope break system is a necessary but not a sufficient condition for studying sandbody development. The formation of effective sandbodies along the slope break depends on the reasonable coupling of effective provenance, necessary association patterns of slope break belt, adequate unloading space and creation of definite accommodation space. Copyright © 2013 John Wiley & Sons, Ltd.     

The Early Cretaceous Jacuí Group,a newly discovered volcaniclastic–epiclastic accumulation at the top of the Paraná Basin,southern Brazil

The presence of volcaniclastic rocks related to the silicic magmatism within the Serra Geral Formation has been a matter of long-standing debate. In this paper, we present extensive documentation that supports the presence and abundance of these rocks in the Jacuí Group, a newly discovered volcaniclastic and epiclastic accumulation in southern Brazil. The Jacuí Group is composed of two interfingered stratigraphic units, the Volta Alegre and Tupanciretã formations, and it represents the uppermost stratigraphic unit of the Paraná Basin. The Volta Alegre Formation is primarily composed of resedimented volcaniclastic tuffites, the pyroclasts which were sourced from the Santa Maria subgroup of the Palmas-type of the Serra Geral Formation. The Tupanciretã Formation is composed of fluvial and aeolian deposits transported towards the north–northwest. Deposition of the Jacuí Group began in the Early Cretaceous (∼132 Ma) and was coeval with the acidic volcanism of the Santa Maria subgroup. This group was deposited in a probable interior sag basin that represents either the beginning of the extension in the inner part of the continent that subsequently migrated to the east or the far-field impact of extensional processes that preceded the break-up of Gondwana and the opening of the South Atlantic Ocean.     

Effects of low- to high-angle normal faults on sedimentary architectures in the Eocene Wenchang Formation,Enping Sag,Pearl River Mouth Basin,South China Sea

The effects of low- to high-angle (>30°) normal faults on sedimentary architectural units in the Eocene Wenchang Formation, Enping Sag, Pearl River Mouth Basin (PRMB), South China Sea were investigated utilising a high-quality 3D seismic data set and restored paleogeomorphology. It has been shown that sequence stratigraphic units and sedimentary architecture are significantly controlled by the low- to high-angle normal faults. The Wenchang Formation, a second-order sequence, can be subdivided into two para-second-sequences (the Lower and Upper Wenchang sequences, E₂W^L and E₂W^U) and seven third-order sequences (from base to top: SQ1～SQ7). The low-angle fault confined sequence architecture of the Wenchang Formation is mainly characterised by lateral stacking with the ratio of the vertical subsidence (V) to horizontal slip (H) being reduced from 1/2 for E₂W^L to 1/6 for E₂W^U. In contrast, the high-angle fault confined sequence is characterised by vertical stacking with the ratio of V/H close to 1 for sequences SQ1 to SQ7. In the 3D seismic area, the features of sediment-dispersal pattern were interpreted based on an integrated analysis of paleogeomorphology, seismic reflection characteristics, stratal thickness distribution and multiple attribute clustering. The results show that the large-scale fan delta, belt-shape lacustrine deposit and bird-foot braided delta systems mainly developed in the low-angle fault confined sequences, whereas small-scale fan delta, rhombus-shaped lacustrine deposit and lobe-shaped braided delta systems inherited tectono-sedimentary architectures in the high-angle fault confined sequences.     

进积型三角洲交汇区沉积模式--以东营凹陷沙三中亚段为例

作为碎屑岩储层发育的最主要沉积相类型之一,进积型三角洲在油气勘探领域具有举足轻重的地位;加强对进积型三角洲沉积模式的研究,对于油气储层预测具有重要现实意义。渤海湾盆地东营凹陷古近纪湖盆内发育的东营三角洲和永安三角洲在沙河街组三段中亚段沉积期发生了交汇,而有关两个三角洲的交汇方式、沉积特征及交汇区储层的预测尚未引起足够的重视。以岩芯观测、录井和地震资料为基础,分析了东营凹陷古近系沙三段中亚段三角洲交汇区沉积特征,探讨了沉积期次、交汇过程,建立了三角洲交汇区沉积模式。研究表明,东营凹陷沙河街组三段中亚段主要发育湖泊、进积型三角洲沉积;储集砂体主要形成于三角洲前缘水下分流河道,河口坝微相次之,浊积岩主要分布于深湖区。认为此前界定的东营三角洲的分布范围可能被夸大,而永安三角洲的沉积规模可能被低估。东营凹陷古近系沙三中亚段可划分为9个期次,其作用过程可分为局部交汇阶段和完全交汇阶段。三角洲水下交汇区是水流汇聚和沉积物卸载的有利场所,叠置砂体可成为有利的油气储层,因而具有重要的油气勘探价值。