Formation Pressure Evaluation Method for Single Well

The paper deals with the methods of formation pressure evaluation for a single well by using the very common ac-cepted parameters, such as drilling exponent , and flowline temperature , etc. which is part of compiling the end well report.     

碱消解-高效液相色谱-电感耦合等离子体质谱法测定生物样品中的甲基汞和乙基汞

建立了碱消解-高效液相色谱-电感耦合等离子体质谱联用系统测定生物样品中甲基汞(MeHg)与乙基汞(EtHg)的分析方法。为提高灵敏度,选用微流量的PFA雾化器,在优化的检测条件下,MeHg及EtHg检出限可达到0.036μg/L和0.03μg/L;线性范围达到4个数量级,两条工作曲线线性相关系数为1。对1.78μg/L MeHg、1.65μg/L EtHg的混合标准溶液重复测定7次,色谱峰面积的相对标准偏差(RSD)分别为1.79%和1.44%。对标准物质BCR 464(金枪鱼)的分析结果表明,测定值与标准值基本吻合,但略低于标准值;甲基汞和乙基汞的加标回收率分别为85.9%和84.5%。高效液相色谱与质谱联用技术的高灵敏度和低检出限能够满足生物样品中汞形态定量分析的要求。     

手掘式顶管在市政排水工程中的应用

从混凝土管材的选定、工作坑的设计及施工、顶管顶进中若干关键问题入手,介绍了手掘式顶管施工技术在成都市中心城水环境综合整治工程G标段管道排水工程中的应用。     

PVC-U塑料管在浅层地热能地下水资源开发工程中应用与研究

PVC-U塑料管具有耐腐蚀、不结垢、质量轻、使用寿命长等特点。将其应用于浅层地热能开发和供水管井工程中,不但可以解决金属井管腐蚀破裂、结垢和水源热泵回灌难等问题,而且还减少了水井维修费用、延长其使用寿命。结合河南郑州实施的437、400 m两眼浅层地热能开发和供水管井示范工程实践,详细论述了PVC-U塑料管成井工艺、存在问题及解决方法的研究成果。     

气举反循环采矿方法单井试验及应用探讨

湖南道县一个矿区,铁锰矿体储量约2200万t。由于复杂的水文地质和工程地质条件,从20世纪70年代发现后,一直没有开采。笔者通过多年大直径工程井的实践经验,查阅国内外资料后,提出了钻井-气举反循环法试开采的方法,并在现场进行了单孔开采试验,获得了比较满意的效果。以该矿体Ⅱ号矿为例,介绍了钻井-气举反循环法采矿的适用条件、工艺过程以及试采情况,并就以后大面积开采提出了若干技术措施。     

甘肃庆城庄19井区上三叠统延长组长82亚油层组低渗透储层的地质特征

长82亚油层组是甘肃庆城地区庄19井区上三叠统延长组中储集砂岩相对富集的层位,但砂岩低渗透性的特点显著,成为影响该区石油储产量增长的主要地质因素。结合前人的相关工作,通过钻井岩心观察、测井曲线分析、储层岩石实验测试等工作,详细地分析了庄19井区长82亚油层组低渗透储层的地质特征,认为沉积微相和压实作用、胶结作用是控制低渗透性储集砂岩发育和分布的主要地质因素,寻找以水下分流河道微相为代表的有利储集相带砂岩体是油气勘探的重要方向。     

围垦区地下水位的控制及计算方法

利用抽水井群和注水井群可以控制生态围垦区的地下水位.研究了潜水抽-注水井(群)耦合作用下浸润线的求解方法,利用势流理论和镜像原理,在假定含水层水平及土层渗透系数各向同性的条件下,推导出完整抽-注水井(群)耦合作用时浸润线的计算公式及非完整抽-注水井(群)耦合作用时浸润线的计算公式,还对潜水单个非完整抽水井及非完整抽-注水井群耦合作用时的解析解和数值解作了比较,结果表明,两者吻合得较好.同时还给出该理论用于地下水位控制中求解抽水量和注水量的方法等,对工程设计有实用价值.     

几丁糖酯原料药稳定性研究

该文建立高效凝胶渗透色谱法 (HPGPC) ,明胶比浊法 ,氧瓶燃烧法三种分析方法考察海洋硫酸多糖药物几丁糖酯的稳定性 ,采用这三种方法分别考察几丁糖酯原料药在高温、高湿、强光照射及加速条件下分子量及分布宽度、样品中硫酸根含量及样品含量的变化情况。结果表明 :三种方法均适用于几丁糖酯的稳定性考察 ,几丁糖酯在上述影响因素条件下稳定性良好     

Jason-1: Assessment of the System Performances

On 7 December 2001, Jason-1 was successfully launched by a Boeing Delta II rocket from the Vandenberg Air Force Base, California. The Jason-1 satellite will maintain the high accuracy altimeter service provided since 1992 by TOPEX/Poseidon (T/P), ensuring the continuity in observing and monitoring the Ocean Dynamics (intraseasonal to interannual changes, mean sea level, tides, etc.). Despite one-fourth the mass and power, the Jason-1 system has been designed to have basically the same performance as T/P, measuring sea surface topography at a centimetric level. This new CNES/NASA mission also provides near real-time data for sea state and ocean forecast. The first two months of the Jason-1 mission have been dedicated to the assessment of the overall system. The goals of this assessment phase were:

1. To assess the behavior of the spacecraft at the platform and payload levels (Jason-1 being the first program to call on the PROTEUS versatile multimission platform for Low and Medium Earth Orbit Missions developed in partnership between Alcatel Space and CNES);

2. To verify that platform performance requirements are met with respect to Jason-1 requirements;

3. To verify that payload instruments performance requirements evaluated at instrument level are met;

4. To assess the performance of the Jason-1 Ground System.

This article will display the main outputs of the assessment of the system. It will demonstrate that all the elements of the onboard and ground systems are within the specifications. Provision of data to the Jason-1 Science Working Team started at the end of March 2002. This is the goal of a six-month phase after closure of the initial assessment phase to derive the error budget of the system in terms of altimetry user products.