岩体结构面水力学模型及应用

本文提出岩体结构面适应性平行板模型和该模型的参数确定方法——三段压水试验新解释,新的模型有益于克服将结构面圆盘模型应用于地下水模拟中的局限性;基于结构面起伏度对地下水流动的影响,导出了起伏度修正系数解析表达式。     

Study on soil–cement grout interface shear strength of soil nailing by direct shear box testing method

An important design parameter in cement-grouted soil nailed structures is the shear strength at the interface between the grouted nail and the surrounding soil. Both field and laboratory pull-out tests are normally used to investigate this interface shear strength. However, these tests have some limitations. In this study, direct shear box tests are adopted to investigate the interface shear strength behaviour between a completely decomposed granite (CDG) soil and a cement grout plate. Tests were carried out in a large direct shear test apparatus over a range of constant normal stress, soil moisture content, and soil–cement grout interface surface waviness. The laboratory test procedures are briefly described and the main test results are presented, followed by a discussion of the shear behaviour of the soil–cement grout interface. The interface shear behaviour is compared with the shear strength behaviour of the same soil tested under comparable conditions. It is shown that the shear stress–displacement behaviour of the soil–cement grout interface is similar to that of the soil alone. The test results indicate that the interface shear strength of the CDG and cement grout material depends on the normal stress level, the soil moisture content, and the interface surface waviness.     

节理表面波纹度对其闭合性质的影响

节理的表面形貌中普遍含有波纹度。本文分析了含波纹度节理闭合模型的性质，探讨了其接触变形机理，研究了波纹度幅值、频率及不规则度方差对节理闭合性质的效应，最后与将波纹度分量作为随机分量处理的以往的节理闭合模型进行了比较。     

A New Method for In-situ Non-contact Roughness Measurement of Large Rock Fracture Surfaces

Summary This paper presents a new method for in-situ non-contact measurements of fracture roughness by using a total station (TS). The TS is a non-reflector geodetic instrument usually used for measuring control points in surveying and mapping. By using a special-developed program, the TS can be used as a point-sensor laser scanner to scan a defined area of the fracture surface automatically, in field or in laboratory, at a distance away from the target surface. A large fracture surface can be automatically scanned with a constant interval of the sampling points, both within a defined area or along a cross-section of the exposed rock face. To quantify fracture roughness at different scales and obtain different densities of the scanned points, the point interval can be selected with the minimum interval of 1 mm. A local Cartesian co-ordinate system needs to be established first by the TS in front of the target rock face to define the true North or link the measurements to a known spatial co-ordinate system for both quantitative and spatial analysis of fracture roughness. To validate the method, fracture roughness data recorded with a non-reflector TS was compared with the data captured by a high-accuracy 3D-laser scanner. Results of this study revealed that both primary roughness and waviness of fracture surfaces can be quantified by the TS in the same accuracy level as that of the high accuracy laser scanner. Roughness of a natural fracture surface can be sampled without physical contact in a maximum distance of tens of meters from the rock faces. Received May 24, 2001; accepted July 24, 2002; Published online November 19, 2002     

Analytical modelling of the shear behaviour of rock joints with progressive degradation of two-order roughness

We present an analytical model for the shear behaviour of rock joints with progressive degradation of two-order asperities including waviness and unevenness. Critical waviness and critical unevenness are used to respectively represent the mechanical involvements of waviness and unevenness during shear. The degradation process of two-order asperities are predicted by considering the stepwise relationship among dilation angle, sheared and unsheared asperity areas, and plastic tangential work. The dilation angle of each asperity decreases as plastic tangential work accumulates. The progressive degradation transiting from critical unevenness to critical waviness is realised through examining the dilation angle and the unsheared area of critical unevenness. The model's predictions are compared with the experimental data from direct shear tests on both regular- and irregular-shaped joints. Good agreement between analytical and experimental curves demonstrate the credence of the proposed model. Therefore, the model, after implemented in finite and discrete element codes, is practicable for the stability assessment of rock-engineering structures.     

风化片岩残积土剪切特性研究

为考察片岩残积土的剪切特性,结合鄂西北山区某边坡工程,开展了风化岩残积土大型原位直剪试验,研究了风化岩残积土的结构组成、剪切面破损特性、剪切强度特性及其含石率、起伏度等相关关系。结果表明：该风化岩残积土应力-应变曲线多呈应变硬化特征,无明显峰值;束状孤石和束状石组多为翻滚和啃断破坏,起伏度随含石率的增大而增大,近似呈线性关系;爬坡效应会引起剪胀,造成剪应力和垂直应力的增大;随着垂直应力的增大,剪切破坏机制逐渐由滑移破坏变为啃断破坏,剪压应力比（剪应力与垂直应力的比值）逐渐减小。研究成果可为边坡工程变形及稳定性分析提供参考。