真空-堆载预压处理高速公路软基的有限元计算

根据高速公路路基的变形特点，提出了真空-堆载联合预压法处理软基的三维Biot固结有限元计算模型，将砂井按照实际尺寸划分单元，避免了平面计算方法中的砂井处理的问题，较以往的平面数值方法更接近实际情况。结合修正剑桥模型，对某真空-堆载联合预压试验段进行了计算、分析，结果令人满意。     

Application of flocculation combined with vacuum preloading to reduce river-dredged sludge

Abstract

To achieve the rapid dewatering of dredged sludge, the flocculation–vacuum-preloading method was tested indoors. In this study, the optimal mixing ratio of six flocculants was determined through the settling column test, and then the proposed method was tested. The water drainage and settlement were monitored during the test, while the soil moisture content and shear strength were measured after the test. The results show that all the flocculants had an optimal mixing ratio, and the addition of 0.8% FeCl₃ or 0.08% anionic polyacrylamide (APAM) in the sludge can better accelerate solid–liquid separation of the sludge. After the test, the water content in the sludge decreased from 140% to 60%. Compared with general vacuum preloading, the use of the proposed method increased the water drainage by 46.5% and 56.8% and decreased the soil volumes by 60.5% and 82.4% for FeCl₃ and APAM, respectively. Moreover, the corresponding shear strength was increased from 10 to 14 and 17?kPa. In addition, the use of APAM increased the solidification rate of heavy metals in the sludge to more than 80%, effectively inhibiting the migration of heavy metals.     

磁浮交通试验线压力管道直线度的测量方法研究及应用

目前,国内外对于磁浮交通真空压力管道直线度测量问题的研究较少。本文结合西南交通大学在建的真空磁浮高速列车试验装置,提出了一种真空压力管道直线度测量方法。该方法在管道内建立高精度=维控制网,依据三维控制网测量采用圆曲线拟合方法确定各节管道的圆心坐标,并采用直线拟合方法分析整个管道的直线度。最后依据上述方法编制程序对实测数据进行了处理分析,验证了方法的可行性和正确性,可为今后真空磁浮压力管道的建设提供技术参考。     

Effect of sand on the vacuum consolidation of dredged slurry

Vacuum preloading is often used to improve the geotechnical properties of dredged slurry. Although the performance of this method has improved with rapidly developing technology, soil columns usually formed on the drainage boundary induce the decrease of permeability around the boundary, thereby limiting the further development of this method. To address this issue, this paper proposes a method for pretreating the slurry combined with sand prior to vacuum consolidation. This method partially replaces the fine particles with sand to reduce the formation of soil columns. Two groups of vacuum preloading tests were performed to investigate the effect of sand content and sand grain size on the vacuum consolidation of dredged slurry. The test results revealed that for a given sand grain size, increasing the sand content of the sand–slurry mixture increased the pore water drainage and accelerated the dissipation of pore water pressure, thereby increasing the vane shear strength. In contrast, for a constant sand content, the samples containing coarse sand exhibited increased pore water drainage and accelerated dissipation of pore water pressure, thereby increasing the vane shear strength of the soil.     

油气储层自生伊利石的分离提纯及其K-Ar同位素测年技术研究

油气注入史研究对于指导油气勘探具有非常重要的意义。油气储层自生伊利石K Ar同位素测年可以为油气注入时间的研究提供科学依据。文中对油气储层自生伊利石分离提纯及其K Ar同位素测年技术进行了系统介绍。对碎屑含钾矿物杂质对自生伊利石K Ar同位素年龄的影响进行了深入研究 ,建立了一套完整的数据处理技术并提出了“校正年龄”的概念。     

Natural entropy production in an inflationary model for a polarized vacuum

Though entropy production is forbidden in standard FRW Cosmology, Berman and Som presented a simple inflationary model where entropy production by bulk viscosity, during standard inflation without ad hoc pressure terms can be accommodated with Robertson–Walker’s metric, so the requirement that the early Universe be anisotropic is not essential in order to have entropy growth during inflationary phase, as we show. Entropy also grows due to shear viscosity, for the anisotropic case. The intrinsically inflationary metric that we propose can be thought of as defining a polarized vacuum, and leads directly to the desired effects without the need of introducing extra pressure terms.     

真空预压联合电渗加固高塑性软土的试验研究

为处理常规排水固结法难以处理的高塑性软土,进行了真空预压联合电渗加固的大比尺室内模型试验研究。试验首先对塑性指数为26～29的高塑性软土进行真空预压的加固,待固结度达到80%后启动电渗进行加固。试验中对电流、电势和表层沉降等进行了全面的监测。试验结果表明电极反转、间歇通电技术有利于提高电能的利用率。土体强度由加固前的0～7.1kPa增长到加固后的18.2～26.2kPa。后期电渗对强度增长的贡献十分明显。     

真空预压法在珠江流域某冲填土场地的应用

依托珠江流域某冲填土场地工程实例,介绍了真空预压法的施工参数及应用效果,另对“薄弱部位”泥浆搅拌桩密封墙处地层的强度进行了定量分析,结果表明真空预压法适用于此类场地,加固效果明显,但密封墙位置强度降幅较大,需采取换填等措施二次处理后才能使用,可为其他类似工程提供参考经验.     

深部地热能开发保温管技术研究现状及发展趋势

地热能是一种清洁的可再生能源,用地热能替代高碳能源是减少碳排放的有效途径之一。井下保温管技术是影响地热能开采效率的关键技术之一。本文从保温管的结构、材料、保温材料及制作工艺方面介绍了井下保温管的发展研究现状,指出纳米保温材料与真空油管的融合将是未来的发展趋势,真空纳米保温管是用于深部地热能开采的首选,同时也指出了真空纳米保温管的基础结构因素对保温性能的影响机制是研究的重点,为优化保温管的制作工艺、降本增效提供参考。     

絮凝−真空−电渗联合加固滩涂软土的模型试验研究

针对真空预压作用下排水板淤堵与排水条件受限等问题,提出絮凝−真空−电渗联合加固法。首先通过沉降柱试验确定合适的有机絮凝剂,然后采用该絮凝剂,分别在 48 h（开始介入真空预压,固结度为0 ）、60 h（排水速率明显下降,固结度为60%）及 84 h（排水速率近乎 0,固结度为 80%）时介入电渗,开展不同电渗介入时间的絮凝−真空−电渗联合加固试验。试验从排水量、十字板剪切强度、含水率与孔压等对比分析联合加固的有效性,确定其最佳电渗介入时间。试验结果表明：当固结度为 80% 时介入电渗,絮凝−真空−电渗联合加固法能够有效地抑制排水速率减小的趋势,增长有效排水时间。同时,土体的抗剪强度和承载力亦得到大幅提升,孔压消散更加均匀。此外,在阳离子聚丙烯酰胺絮凝剂的作用下,初始排水速率快,在一定程度上使土体的渗透性得到提升,有效地解决了排水板淤堵问题,说明絮凝−真空−电渗联合加固法具有较强的优越性。