真空联合堆载预压加固桥头软基地表沉降分析

根据浃里陈大桥桥头试验段的地表沉降的现场监测结果,主要分析了加固区的地表沉降随时间的变化规律、影响区的地表沉降特征以及对周围建筑物的影响;真空能量与地表沉降的关系以及停泵后的地表回弹量.结果表明,真空联合堆载能大幅消除沉降量,减少工后沉降量,达到防止"桥头跳车"的作用.     

Application of flocculation combined with vacuum preloading to reduce river-dredged sludge

Abstract

To achieve the rapid dewatering of dredged sludge, the flocculation–vacuum-preloading method was tested indoors. In this study, the optimal mixing ratio of six flocculants was determined through the settling column test, and then the proposed method was tested. The water drainage and settlement were monitored during the test, while the soil moisture content and shear strength were measured after the test. The results show that all the flocculants had an optimal mixing ratio, and the addition of 0.8% FeCl₃ or 0.08% anionic polyacrylamide (APAM) in the sludge can better accelerate solid–liquid separation of the sludge. After the test, the water content in the sludge decreased from 140% to 60%. Compared with general vacuum preloading, the use of the proposed method increased the water drainage by 46.5% and 56.8% and decreased the soil volumes by 60.5% and 82.4% for FeCl₃ and APAM, respectively. Moreover, the corresponding shear strength was increased from 10 to 14 and 17?kPa. In addition, the use of APAM increased the solidification rate of heavy metals in the sludge to more than 80%, effectively inhibiting the migration of heavy metals.     

重塑黏土空心圆柱试样制备技术改进及应用

受大体积制样降低土体均衡性及取芯扰动试样的影响,目前在包括主应力轴旋转等复杂应力路径下所开展的重塑软黏土力学特性试验研究的可靠性有待进一步提高。基于真空预压技术设计了制备重塑样的新型装置及方法,具有渗透排水与内壁成型双重作用的竖向排水体、分级施加真空负压以及多个试样同时制作等部件和技术,可快速制备大量空心圆柱试样,所制试样含水率具有较好的均匀性和一致性,减小了后期取芯对试样造成的扰动。开展了主应力轴旋转路径下的相关验证试验,从土体力学性能方面证明了所制试样用于研究复杂应力路径条件下土体性态演变规律的可靠性,为系统研究软黏土静动力学特性与长期稳定性提供了前提。     

关于真空预压沉降计算的研究

真空预压的沉降计算参数（压缩系数）是通过压缩试验得到的,但地基土在真空预压荷载作用下的受力状态与压缩试验中土样的受力状态是不同的,用压缩试验得到的压缩系数进行真空预压处理的沉降计算是不合理的。为了探讨这个问题,进行线弹性条件下的理论分析、模拟真空预压应力路径的全自动应力控制三轴（GDS）压缩试验、真空预压的现场监测等工作,初步讨论了弹性条件竖向荷载相同时等向与单向压缩量的比、模拟真空预压应力路径的压缩系数与单向压缩时的压缩系数的试验关系,真空预压现场监测和单向压缩量计算结果对比表明了上述分析的合理性。     

深井分层真空抽水试验及机理分析

基于某单井分层真空抽水综合试验,使用新型分层抽水试验装置,对试验方法进行技术改进,使分层抽水工作省时高效、安全可靠、经济实用。将该工艺方法监测数据与常规方法监测数据进行对比,研究地层、真空负压对抽水效果的影响,并对其机理进行详细分析,得出真空分层抽水井管周围渗流场的变化性状。对比试验表明,分层真空抽水工艺方法在提高单井出水量、洗井效果上具有明显优势。     

Evidence for variations in cryogenic extraction deuterium biases of plant xylem water across foundational northeastern US trees

Measurements of oxygen and hydrogen isotopes in plant xylem water (²H, ¹⁸O) have helped to redefine conceptual and numerical models of the hydrological cycle and understand how plants compete for subsurface water. Recent experiments have shown that Cryogenic Vacuum Extraction (CVE) of plant xylem water can result in a δ²H bias. We tested if CVE δ²H-biases varied significantly across seven foundational northeastern US forest trees with a series of tree core rehydration experiments. Our analysis demonstrated that CVE δ²H-biases were well predicted by sample gravimetric water content and varied significantly with tree species identity. We show that species-level δ²H-bias corrections can result in substantially different understandings of plant water uptake and transpiration versus uncorrected data or generic bias corrections. This research demonstrates an urgent need for the critical evaluation of CVE for plant water extraction. In the absence of a stronger understanding of CVE δ²H-biases, we recommend that xylem water δ²H observations should not be used in plant water uptake studies.     

废弃泥浆底部真空−上部堆载预压模型试验研究

针对工程泥浆回填废弃矿坑处置的安全问题,开展底部真空和上部堆载预压处理废弃工程泥浆的模型试验,探讨该技术在废弃矿坑回填处置工程应用的可行性。试验结果表明,底部真空和上部堆载预压使得泥浆含水率显著降低及泥土的强度明显提高,处理一个月后,含水率从初始450%降低至95%～105%,体积减量达到73.4%;不排水强度由初始为0的状态提高至9.8～13.4 kPa。在初始的静置阶段,泥浆颗粒沉积存在重力分异现象,粗颗粒在底部沉积有助于缓解真空预压过程中淤堵问题。底部真空作用下,泥浆中孔隙水渗流方向并非完全一维向下,在径向存在水力梯度。处理后泥土压缩性与软土相近,渗透性优于软土。基于试验结果和大应变固结理论,考虑泥浆的自重固结以及压缩性与渗透性的非线性变化,利用有限差分法分析了单次回填厚度对泥浆层固结时间和减量效果的影响,提出了现场实施的工艺参数建议。     

真空预压部分工艺的改进

详细介绍了含承压水地层真空预压施工工艺,打设塑排板采用撕膜和非撕膜施工工艺相结合,既可靠又经济;阐述了在真空预压过程中若砂垫层失效后如何采取有效的补救措施;提出了采用四周循环蓄水处理夹砂层漏气的办法,实际证明,效果良好。介绍了若干其他施工工艺,可为类似地质条件下的真空预压施工作参考之用。     

Natural entropy production in an inflationary model for a polarized vacuum

Though entropy production is forbidden in standard FRW Cosmology, Berman and Som presented a simple inflationary model where entropy production by bulk viscosity, during standard inflation without ad hoc pressure terms can be accommodated with Robertson–Walker’s metric, so the requirement that the early Universe be anisotropic is not essential in order to have entropy growth during inflationary phase, as we show. Entropy also grows due to shear viscosity, for the anisotropic case. The intrinsically inflationary metric that we propose can be thought of as defining a polarized vacuum, and leads directly to the desired effects without the need of introducing extra pressure terms.     

真空预压法在珠江流域某冲填土场地的应用

依托珠江流域某冲填土场地工程实例,介绍了真空预压法的施工参数及应用效果,另对“薄弱部位”泥浆搅拌桩密封墙处地层的强度进行了定量分析,结果表明真空预压法适用于此类场地,加固效果明显,但密封墙位置强度降幅较大,需采取换填等措施二次处理后才能使用,可为其他类似工程提供参考经验.