Velocity-Interface Structure of the Southwestern Ryukyu Subduction Zone from EW9509-1 OBS/MCS Data

A wide-angle seismic survey, combining ocean-bottom seismometers (OBS) and multi-channel seismic (MCS) profiling, was implemented in the southwestern Ryukyu subduction zone during August and September 1995. In this paper, we present the data analysis of eight OBSs and the corresponding MCS line along profile EW9509-1 from this experiment. Seismic data modeling includes identification of refracted and reflected arrivals, initial model building from velocity analysis of the MCS data, and simultaneous and layer-stripping inversions of the OBS and MCS arrivals. The velocity-interface structure constructed along profile EW9509-1 shows that the northward subduction of the Philippine Sea Plate has resulted in a northward thickening of the sediments of the Ryukyu Trench and the Yaeyama accretionary wedge north of the trench. The boundary between the subducting oceanic crust and the overriding continental crust (represented by a velocity contour of 6.75 km/s) and a sudden increase of the subducting angle (from 5 degrees to 25 degrees) are well imaged below the Nanao Basin. Furthermore, velocity undulation and interface variation are found within the upper crust of the Ryukyu Arc. Therefore, the strongest compression due to subduction and a break-off of the slab may have occurred and induced the high seismicity in the forearc region. This revised version was published online in November 2006 with corrections to the Cover Date.     

Geometric form of Haiyuan fault zone in the crustal interior and dynamics implications

The deep seismic reflection data on profile HY2 are reprocessed by the method of simultaneous inversion of velocity distribution and interface position. By the travel-time inversion with the data of the diving wave Pg and fault plane reflection wave, we determine the geometric form and velocity of Haiyuan fault zone interior and surrounding rock down to 10 km depth. The measured data show that the amplitudes have strong attenuation in the range of stake number 37–39 km, suggesting the fault zone has considerable width in the crustal interior. The results of this paper indicate that to the north of the fault zone the crystalline basement interface upheaves gradually from southwest to northeast and becomes shallow gradually towards northeast, and that to the south of the fault zone, within the basin between Xihua and Nanhua mountains, the folded basement becomes shallow gradually towards southwest. The obliquity of the fault zone is about 70° above the 3 km depth, about 60° in the range of the 3–10 km depths. From the results of this paper and other various citations, we believe that Haiyuan fault zone is in steep state from the Earth’s surface to the depth of 10 km. Foundation item: Joint Seismological Science Foundation of China (201001) and State Key Basic Research Development and Programming Project (95-13-02-02). Contribution No. RCEG200308, Exploration Geophysical Center, China Earthquake Administration.     

南海神狐海域水合物一维速度结构研究： 基于中—低饱和度水合物区的约束

高精度OBS探测作为目前研究水合物的常用技术手段,可以获取水合物矿体精细速度结构,在研究天然气水合物饱和度、水合物资源的预测与开发等方面具有重要指导意义。然而正演模拟OBS速度结构是繁琐漫长的过程,构建合理的初始模型是后续精细结构快速成像的重要前提。本研究基于全球18个已探明地震波速度的水合物区,分析了水合物矿体内纵波速度的共性特征和影响因素,拟合了水合物矿体带纵波速度与海水深度、沉积物厚度的经验公式。综合经验公式、OBS数据与多道地震剖面,建立了神狐水合物区横向均匀初始模型,并通过射线追踪与走时拟合模拟了神狐海域的一维纵波速度结构。结果表明,神狐水合物矿体带具有高纵波速度(1.83~1.92 km/s）,游离气层具有低P波速度（1.60~1.70 km/s）,此外,基于全球的水合物速度经验公式对神狐海域速度结构模拟具有重要参考意义,有望为获取神狐海域二维/三维精确速度结构提供可靠的初始模型,进而指导水合物精细勘察与资源评估。     

2017年6月3日阿拉善左旗5.0级地震震源深度测定

2017年6月3日18时11分内蒙古阿拉善左旗（37.99° N,103.56° E）发生5.0级地震,利用近震深度震相sPL测定法、CAP波形反演法、sPn与Pn震相走时差法,进行震源深度精确测定。研究结果表明,3种方法测得的该地震震源深度基本一致,分布范围为8.5—11 km,表明该地震发生在上地壳。     

中国地震台网初至P波区域三维走时表的建立

基于LLNL-G3Dv3全球P波三维速度模型,应用FMM软件包计算并建立了中国地震台网990个台站的初至P波区域三维走时表．该走时表覆盖了以台站为中心的水平向20°×20°、 垂直向-5.1—80 km （向下为正）的三维空间. 其水平向间隔为0.2°,垂直向间隔为5 km．这样对于任一深度小于80 km的震源,均可以应用此三维走时表计算其到周围10°范围内台站的走时．中国地震台网初至P波区域三维走时表的建立,对于改善区域初至P波走时预测,提高地震定位精度有一定现实意义．      

基于MYSQL数据库的地震震相走时系统编制与应用

介绍在网络环境下地震震相走时表系统编制的相关技术和流程,阐述该系统特点及使用方法.该震相走时系统在安徽省地震台站应用后,速报时间缩短,地震震相分析精度提高,收到预期效果.     

利用重复地震P波走时差观测地壳介质的微动态

基于研究区域地震震相到时资料及地震波数据,给出了两个局部地区地壳介质微动态变化的实例。一个是汶川8.0级地震起始破裂区域,即A区;另一个是三岔口地区,即B区,该区域为活动断裂交汇部位,未发生过大地震,但近年来中小地震频繁。分析A区后发现,在汶川8.0级地震前,部分台站观测的地壳介质微动态出现了中短期异常,震源区正东及北东方向波速升高,反映出地壳介质受到显著挤压而处于硬化阶段;震源区西南方向的波速则比较稳定。分析B区后发现,可能受到汶川8.0级地震的影响,部分台站给出的计算结果在地震前后发生了变化,显示出不同方位地壳介质承压状态的差异。     

地震走时层析成像方法及在陨石坑探测中的应用

地震走时层析成像是地球物理反演中成熟的方法之一,已在许多领域得到广泛应用,并取得了良好的效果。本文介绍的地震层析成像方法包括模型参数化、射线追踪和理论走时计算、非线性方程组的线性化、线性化方程组的求解以及解的评价。观测数据使用了中国地震局地球物理勘探中心在岫岩陨石坑取得的浅层地震折射资料,反演得到两条近垂直交叉剖面的P波速度结构。结果表明,该坑为一简单坑,直接撞击形成的区域为直径约1．8km、深度约700m的坑体;坑中心深度约700m周围以及向下出现的7．0km／s以上的高波速可能是陨石撞击时所产生的高温高压使表层岩石达到熔融状态,改变了围岩的性质,致使围岩速度升高。     

Deep dynamical processes in the central-southern Qinghai-Tibet Plateau—Receiver functions and travel-time residuals analysis of north Hi-Climb

Teleseismic receiver functions and travel-time residuals along the north Hi-Climb broadband seismic array in the central-southern Qinghai-Tibet Plateau show that the lithosphere structures in the central and western Qinghai-Tibet Plateau are different. In the central Qinghai-Tibet Plateau, the Indian Plate is northward subducted beneath the Qiangtang block and arrives at the greatest depth beneath the central-southern Qiangtang block. The delaminated Indian lithospheric slab remains beneath the central Lhasa block to a depth possibly greater than that of the upper interface of the mantle transform zone. In the western Qinghai-Tibet Plateau, the Indian lithospheric plate is gently northward subducted and may have arrived to the south of Tarim plate. Due to the resistance from the gently northward subduction of the Indian mantle lithosphere in the western Qinghai-Tibet Plateau, the upwelling mantle material be-neath the Qiangtang block moves mostly toward the east to bring about the lateral eastward flow of the deep mantle hot material in the central Qinghai-Tibet Plateau.