双酶法制备低黏度辛烯基琥珀酸淀粉钠的工艺条件

对双酶法制备用作微胶囊壁材的低黏度辛烯基琥珀酸淀粉钠的工艺路线与工艺条件进行了研究。正交实验结果表明 ,在酯化淀粉乳质量浓度 2 0 %、每 g淀粉α 淀粉酶的用量为 6SKBU的条件下 ,影响产品性能的各因素中 ,糖化酶的用量对产品的DE值和流度的影响最大 ,各因素的重要性依次是 :糖化酶的用量、糖化酶作用时间、α 淀粉酶保温作用时间。最佳工艺条件是 :α 淀粉酶保温作用时间 4min ,每 g淀粉糖化酶用量 0 .2GAU ,糖化酶作用时间 2 .5h ,此时产品的DE值为 30 ,流度为 80左右     

Plane Symmetric Domain Wall in Lyra Geometry

In this paper general solutions are found for domain walls in Lyra geometry in the plane symmetric spacetime metric given by Taub. Expressions for the energy density and pressure of domain walls are derived in both cases of uniform and time varying displacement field β. It is also shown that the results obtained by Rahaman et al [IJMPD, 10, 735 (2001)] are particular case of our solutions. Finally, the geodesic equations and acceleration of the test particle are discussed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

A Forced System of Two Cylinders with Various Spacings

The spectrum characteristics and wake structures for a circular cylinder oscillating in a wake are investigated by use of the currently modified virtual boundary method. A forced system of two cylinders with a small spacing ( the downstream one is made to oscillate in the transverse direction) is studied and interesting flow characteristics are observed. A vortex switch and the change of vortex modes (between 2S mode and 2P mode) are observed in the “lock-in“ region. Vortex bands are formed and lost with the increasing excitation frequency. Information concerning saddle points in the flow field is obtained for different excitation frequencies. For a forced system of two cylinders with a large spacing, the upstream cylinder sheds vortexes because there is no downstream cylinder oscillating in the wake. No distinct “lock-in“ response is found for the downstream cylinder.     

软粘土中插入式大直径薄壁圆筒结构的一种极限状态分析模型

根据插入式大直径薄壁圆筒结构的工作特点建立了其合理的破坏机制，以此为基础建立了受横向荷载作用的插入式大直径薄壁圆筒结构的上限法极限分析模型，从中可以得到作用于插入式大直径薄壁圆筒结构上的横向极限荷载近似的上限解；并根据上限法模型计算结果，提出了计算受横向荷载作用的插入式大圆筒结构侧壁极限抗力的简化修正模型，利用此修正模型，基于极限平衡法，可以求解作用于插入式大直径薄壁圆筒结构上的横向极限荷载。     

Action of Cnoidal Waves on Vertical Walls

Based on the 2nd order cnoidal wave theory, the characters of shallow water standing waves and their action on vertical walls are studied in this paper. The theoretical expressions of the wave surface elevation in front of and the wave pressure on the vertical wall are obtained. In order to verify the theoretical results, model tests were made in the State Key Laboratory of Coastal and Offshore Engineering at DUT. For the wave surface elevation in front of the wall and the wave forces on the wall at the moment when the wave surface at the wall surface goes down to the bottom of the wave trough, the calculated results coincide quite well with the experimental results. For the wave forces on the wall at the moment when the wave surface at the wall surface goes up to the top of the wave crest, the theoretical expressions are modified by the experimental results. For the convenience of practical use, calculations are made for the wave conditions which usually occur in enginering practice by use of the inves     

Wave-Current Forces on Vertical Cylinders in Side-by-Side Arrangement for Irregular Waves Combined With Opposing Current

- The wave-current forces on vertical piles in side-by-side arrangement induced by irregular waves with opposing current are investigated experimentally in this paper. The characteristics in both time and frequency domain of in-line, lift and resultant forces are analyzed. The grouping effect coefficients of inline, lift and resultant forces on piles related to KC number and relative spacing parameters are given. These results are compared with those in the case of irregular waves combined with following currents. It is found that the results in these two cases are quite different. The range of KC number tested is 10- 60, the range of Reynolds number is (0.55-3.43) ×104.     

The Nonlinear Wave Force on a Circular Cylinder in Shallow Water

Based on the 1st order cnoidal wave theory, the nonlinear wave diffraction around a circular cylinder in shallow water is studied in this paper. The equation of the wave surface around the cylinder is formulated and by using this formula the wave surface elevation on the cylinder surface can be obtained. In this paper, the formula for calculating the cnoidal wave force on a circular cylinder is also derived. For the wave conditions which are often encountered in practical engineering designs, the ratios of the nonlinear wave forces to the linear wave forces are calculated, and the results are plotted in this paper for design purposes. In order to verify the theoretical results, model tests are conducted. After comparing the test results with the theoretical ones, it is concluded that, in shallow water, for the case of T g / d~(1/2) > 8-10 and H / d > 0.3, the cnoidal wave theory should be used to calculate the wave action on a cylindrical pier.     

An Approach to Stability Analysis of Embedded Large-Diameter Cylinder Quay

The large-diameter cylinder structure, which is made of large successive bottomless cylinders placed on foundation bed or partly driven into soil, is a recently developed retaining structure in China. It can be used in port, coastal and off-shore works. The method for stability analysis of the large-diameter cylinder structure, especially for stability analysis of the embedded large-diameter cylinder structure, is an important issue. In this paper, an idea is presented that is, em-bedded large-diameter cylinder quays can be divided into two types, i.e. the gravity wall type and the cylinder pile wall type. A method for stability analysis of the large-diameter cylinder quay of the cylinder pile wall type is developed and a method for stability analysis of the large-diameter cylinder quay of the gravity wall type is also proposed. The effect of sig-nificant parameters on the stability of the large-diameter cylinder quay of the cylinder pile wall type is investigated through numerical calculation.