The response of an elastic half‐space under a momentary shear line impulse

The response of an ideal elastic half‐space to a line‐concentrated impulsive vector shear force applied momentarily is obtained by an analytical–numerical computational method based on the theory of characteristics in conjunction with kinematical relations derived across surfaces of strong discontinuities. The shear force is concentrated along an infinite line, drawn on the surface of the half‐space, while being normal to that line as well as to the axis of symmetry of the half‐space. An exact loading model is introduced and built into the computational method for this shear force. With this model, a compatibility exists among the prescribed applied force, the geometric decay of the shear stress component at the precursor shear wave, and the boundary conditions of the half‐space; in this sense, the source configuration is exact. For the transient boundary‐value problem described above, a wave characteristics formulation is presented, where its differential equations are extended to allow for strong discontinuities which occur in the material motion of the half‐space. A numerical integration of these extended differential equations is then carried out in a three‐dimensional spatiotemporal wavegrid formed by the Cartesian bicharacteristic curves of the wave characteristics formulation. This work is devoted to the construction of the computational method and to the concepts involved therein, whereas the interpretation of the resultant transient deformation of the half‐space is presented in a subsequent paper. Copyright © 2003 John Wiley & Sons, Ltd.     

Elastic solutions for stresses in a transversely isotropic half‐space subjected to three‐dimensional buried parabolic rectangular loads

In many areas of engineering practice, applied loads are not uniformly distributed but often concentrated towards the centre of a foundation. Thus, loads are more realistically depicted as distributed as linearly varying or as parabola of revolution. Solutions for stresses in a transversely isotropic half‐space caused by concave and convex parabolic loads that act on a rectangle have not been derived. This work proposes analytical solutions for stresses in a transversely isotropic half‐space, induced by three‐dimensional, buried, linearly varying/uniform/parabolic rectangular loads. Load types include an upwardly and a downwardly linearly varying load, a uniform load, a concave and a convex parabolic load, all distributed over a rectangular area. These solutions are obtained by integrating the point load solutions in a Cartesian co‐ordinate system for a transversely isotropic half‐space. The buried depth, the dimensions of the loaded area, the type and degree of material anisotropy and the loading type for transversely isotropic half‐spaces influence the proposed solutions. An illustrative example is presented to elucidate the effect of the dimensions of the loaded area, the type and degree of rock anisotropy, and the type of loading on the vertical stress in the isotropic/transversely isotropic rocks subjected to a linearly varying/uniform/parabolic rectangular load. Copyright © 2002 John Wiley & Sons, Ltd.     

临猗5.0级地震前后品质因子值变化特征研究

利用西安数字地震遥测台网记录的数字地震资料，采用P波初动半周期残差法求得1998年7月临猗5．0级地震前后不同路径的Q(品质因子)值变化，发现在地震发生前Q值为87～203，震后Q值为67～164，震前震中区附近出现明显的高Q值异常。结果表明，地震前的高Q值异常可以作为地震预测的一种手段。     

多波束数据的海底数字地形模型构建

提出大批量多格式原始多波束数据的DTM构建方法，以满足大区域、大比例尺海底地形制图的需要。在多种格式原始多波束数据接口和系统内部标准数据结构的基础上，通过对数据文件、数据种类和数据运算量的有效组织管理，实施边读入、边权重配赋的网格插值，分析了高斯、指数和距离平方反比权重函数的适用性，及最小值、最大值和平均值的实用性。在权重配赋网格插值基础上，提出分形fBM和张力样条配合使用的方程式插值方法，保证DTM数据的有效外延和地形分辨。整套算法效率高，并能有效保证DTM的精度，对存储在外部介质的数据遍历一次即可完成网格插值。     

松辽盆地西部张裂缝预测的应力场方法

以松辽盆地地质资料为基础，介绍了应力场和张裂缝预测的计算方法。通过了各种岩性的张破裂概率隶属函数，预测松辽盆地酉部张裂缝区的分布。据此，为今后的油气勘探提出了几点认识和建议。     

Numerical evaluation of the damping‐solvent extraction method in the frequency domain

The damping‐solvent extraction method for the analysis of unbounded visco‐elastic media is evaluated numerically in the frequency domain in order to investigate the influence of the computational parameters—domain size, amount of artificial damping, and mesh density—on the accuracy of results. An analytical estimate of this influence is presented, and specific questions regarding the influence of the parameters on the results are answered using the analytical estimate and numerical results for two classical problems: the rigid strip and rigid disc footings on a visco‐elastic half‐space with constant hysteretic material damping. As the domain size is increased, the results become more accurate only at lower frequencies, but are essentially unaffected at higher frequencies. Choosing the domain size to ensure that the static stiffness is computed accurately leads to an unnecessarily large domain for analysis at higher frequencies. The results improve by increasing artificial damping but at a slower rate as the total (material plus artificial) damping ratio ζ_t gets closer to 0.866. However, the results do not deteriorate significantly for the larger amounts of artificial damping, suggesting that ζ_t≈0.6 is appropriate; a larger value is not likely to influence the accuracy of results. Presented results do not support the earlier suggestion that similar accuracy can be achieved by a large bounded domain with small damping or by a small domain with larger damping. Copyright © 2002 John Wiley & Sons, Ltd.     

半无限空间中圆形孔洞周围SH波的散射

建立了求解在含有圆形孔洞的弹性半空间中SH波散射与圆形孔洞附近动应力集中问题的解析方法。利用SH波散射的对称性和多极坐标的方法，构造了一个可以预先满足半空间自由表面上应力自由边界条件的圆形孔洞对SH波散射的波函数。利用这一波函数，则可将该问题转化成对一个圆形孔洞散射的求解问题。该问题的解答最终又可归结为对一组无究代数方程组的求解问题，并可利用截断有限项的方法对其进行计算，最后给出了有关圆形也洞附近动应力集中问题的算例和数值结果，并讨论了波数与圆孔至自由边界距离变化对动应力集中的影响。     

夯扩桩半模夯扩试验及夯扩机理探讨

设计了夯扩桩半模夯扩试验，采用读数显微镜直接测读上体质点位移，获得了不同密度的均匀砂土中砂粒的位移，由此确定土体的位移场和密度场。借鉴魏西克（Ｖｅｓｉｃ）球形孔穴膨胀理论和梅耶霍夫（Ｍｅｙｅｒｈｏｆ）塑性剪切理论，结合模型试验成果，对夯扩机理作了探讨，并定性地提出了夯扩机理模式。     

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.