Sedimentary characteristics of tide-dominated estuary in Donghetang Formation（Upper Devonian）, central Tarim Basin

The Donghetang Formation （Upper Devonian） in central Tarim Basin has been thought an important oil and gas reservoir since the abundant oil and gas resources were found in the wells W16, W20, W34, and other fields. However, the sedimentary environment of the Donghetang Formation has been disputed because it suffered from both tidal and fluvial actions and there were not rich fossils in the sandstone. After the authors analyzed sedimentary features by means of drill cores, well logging data, paleosols, and with SEM obseruations, three kinds of sedimentary environments were distinguished： alluvial fan, tide-dominated estuary, and shelf. Particularly, the sedimentary features of tide-dominated estuary were studied in detail. Besides, the authors discussed sedimentary characteristics of the Donghetang Formation which was divided into two fourth-order sequences and five system tracts. At the same time, according to the forming process of five system tracts, the whole vertical evolution and lateral transition of tide-dominated estuary were illustrated clearly. Finally, the reservoir quality was evaluated based on porosity and permeability.     

Upscaling of elastic properties for large scale geomechanical simulations

Large scale geomechanical simulations are being increasingly used to model the compaction of stress dependent reservoirs, predict the long term integrity of under‐ground radioactive waste disposals, and analyse the viability of hot‐dry rock geothermal sites. These large scale simulations require the definition of homogenous mechanical properties for each geomechanical cell whereas the rock properties are expected to vary at a smaller scale. Therefore, this paper proposes a new methodology that makes possible to define the equivalent mechanical properties of the geomechanical cells using the fine scale information given in the geological model. This methodology is implemented on a synthetic reservoir case and two upscaling procedures providing the effective elastic properties of the Hooke's law are tested. The first upscaling procedure is an analytical method for perfectly stratified rock mass, whereas the second procedure computes lower and upper bounds of the equivalent properties with no assumption on the small scale heterogeneity distribution. Both procedures are applied to one geomechanical cell extracted from the reservoir structure. The results show that the analytical and numerical upscaling procedures provide accurate estimations of the effective parameters. Furthermore, a large scale simulation using the homogenized properties of each geomechanical cell calculated with the analytical method demonstrates that the overall behaviour of the reservoir structure is well reproduced for two different loading cases. Copyright © 2004 John Wiley & Sons, Ltd.     

Morphological analysis of the drainage system in the Eastern Alps

We study the morphology of the major rivers draining the Eastern Alps to test whether the active tectonics of this part of the orogen is reflected in the shape of channel profiles of the river network. In our approach we compare channel profiles measured from digital elevation models with numerically modelled channel profiles using a stream power approach. It is shown that regions of high stream power coincide largely with regions of highest topography and largest uplift rates, while the forelands and the Pannonian Basin are characterised by a significantly lower stream power. From stream power modelling we conclude that there is young uplift at the very east of the Eastern Alps, in the Bohemian Massif and in the Pohorje Range. The impact of the Pleistocene glaciations is explored by comparing properties of rivers that drain in proximal and distal positions relative to the ice sheet during the last glacial maximum. Our analysis shows that most knick points, wind gaps and other non-equilibrium features of catchments covered by ice during the last glaciations (Salzach, Enns) can be correlated with glacial processes. In contrast the ice free catchments of the Mur and Drava are characterized by channels in morphological equilibrium at the first approximation and are showing only weak evidence of the strong tectonic activity within these catchments. Finally, the channel profiles of the Adige and the divide between the upper Rhine and Danube catchments differ significantly from the other catchments. We relate this to the fact that the Adige and the Rhine respond to different base levels from the remainder of the Eastern Alps: The Adige may preserve a record from the Messininan base level change and the Rhine is subject to the base level lowering in the Rhine Graben.     

Quick-look assessments to identify optimal CO2 EOR storage sites

A newly developed, multistage quick-look methodology allows for the efficient screening of an unmanageably large number of reservoirs to generate a workable set of sites that closely match the requirements for optimal CO₂ enhanced oil recovery (EOR) storage. The objective of the study is to quickly identify miscible CO₂ EOR candidates in areas that contain thousands of reservoirs and to estimate additional oil recovery and sequestration capacities of selected top options through dimensionless modeling and reservoir characterization. Quick-look assessments indicate that the CO₂ EOR resource potential along the US Gulf Coast is 4.7 billion barrels, and CO₂ sequestration capacity is 2.6 billion metric tons. In the first stage, oil reservoirs are screened and ranked in terms of technical and practical feasibility for miscible CO₂ EOR. The second stage provides quick estimates of CO₂ EOR potential and sequestration capacities. In the third stage, a dimensionless group model is applied to a selected set of sites to improve the estimates of oil recovery and storage potential using appropriate inputs for rock and fluid properties, disregarding reservoir architecture and sweep design. The fourth stage validates and refines the results by simulating flow in a model that describes the internal architecture and fluid distribution in the reservoir. The stated approach both saves time and allows more resources to be applied to the best candidate sites.     

黄、渤海沿岸海冰测点代表性浅析

通过分析１９８０年以后的海冰资料和卫星云图照片，对黄、渤海沿岸１１个海冰测点的历史变迁进行了评述，浅析了测点的优劣及使用资料时应注意的事项。     

The depletion of oil

The trend of previous estimates of the world's ultimate recovery of oil suggests a figure of 1650 BBO, of which 1438 BBO have been discovered and 978 BBO remain to be produced. Some large reported reserve figures are questioned. Importance is attached to the mid-point of depletion when rising production tends to give way to decline. The share of the world's supply coming from six Middle East countries is set to continue to rise from its 1986 low of 16% to as much as 50% by 2010, with the likely consequence of higher oil prices and serious political implications. The world is rapidly approaching a turning point when it has to face the consequences of an irreversible decline in oil production.     

海上矿石运输最优船队的组建

针对海上矿石运输，介绍了一种完成定量任务并能使投资费用最少为目标的最优船队组建方法，同时对易变参数进行了灵敏度分析，使决策更加科学化     

山东胜利油田海洋石油勘探开发现状及前景分析

胜利油田海上勘探区 ,位于渤海湾南部的极浅海海域 ,其范围为 :西起四女寺河口 ,经套儿河口、老黄河口、新黄河口、小青河口 ,东到潍河口 ,海岸长 4 1 4km,胜利矿产登记线内面积 4 870 km2 ,水深一般 0～ 5m,最深 1 8m。截止 2 0 0 0年年底 ,已完成二维地震 71 3 6.1 km,三维地震 1 588.58km2 ,完钻探井 1 0 2口 ,测井解释油气层井 87口 ,试油 85口 ,其中 74口获工业油流 ,6口获低产油流。发现了埕岛、埕北 3 0、新滩 3个油田 ,在明化镇组、馆陶组、东营组、沙河街组、中生界、上古生界、下古生界、太古界中发现了 8套含油层系 ,6种类型的油气藏 ,已探明含油面积 1 45.8km2 ,石油地质储量 3 860 9万 t;控制含油面积57.5km2 ,石油地质储量 894 8万 t,其中埕岛油田是渤海域发现最早的亿吨级油田 ,目前已建成 2 1 6万 t年生产能力 ,累积产油 1 0 57万 t。根据两轮资源评价及勘探实践的认识 ,与本区有关的 8个生油凹陷 (岐口、沙南、渤中、埕北、桩东、青东、莱州湾、潍北 )总资源量约 1 2 .0亿 t,目前已找到探明加控制石油地质储量为 4 .75亿 t,仍有较大的勘探开发潜力。今后将对 8个构造带 (埕子口、埕岛、埕北 3 0、长堤、垦东、青东、青坨子、潍北 )进行勘探 ,落实探明储量 ,进一步投入开发 ,为胜利油田     

Exchange flow of oil and sea-water in a ruptured submarine pipeline

The rupture of a submarine oil pipeline starts various mechanisms leading to an oil spill. Among these mechanisms the leakage of oil driven by the difference in specific gravities of oil and sea-water is difficult to estimate. A simple mathematical model has been developed and laboratory experiments have been carried out to obtain an insight into the density-driven exchange flow and to determine the leak rate. The mathematical model is predictive and takes account of the effects of friction, inclination of the pipeline, and inertia of the fluid. The experiments were done in a horizontal model pipeline. Theoretical and experimental results are in satisfactory agreement.