A multi‐level parallelized substructuring‐frontal solution for coupled thermo/hydro/mechanical problems in unsaturated soil

This paper proposes a multi‐level parallelized substructuring–frontal combined algorithm for the analysis of the problem of thermo/hydraulic/mechanical behaviour of unsaturated soil. Temperature, displacement, pore water pressure and pore air pressure are treated as the primary variables in a non‐linear analysis. Details are given firstly of the substructuring–frontal combined approach. The incorporation of the algorithm in a multi‐level parallel strategy is then discussed. The parallel processing can thus be carried out at different substructural levels. The method thus developed impacts, in a positive way, on both computer storage requirement and execution time. Copyright © 2003 John Wiley & Sons, Ltd.     

Problems with biogenic silica measurement in marginal seas

Surface sediment samples from the Bohai, Yellow Sea, and the Pacific were used to assess biogenic silica (BSi) content and to study uncertainties in BSi measurements. The contents of BSi in the Bohai and Yellow Sea are all less than 1%. The dissolution of BSi in sediments from the Bohai and Yellow Sea is very important to maintain high levels of silicate in the water column. The non-biogenic silica from clay minerals has an obvious effect on BSi of sediment samples in the Bohai and Yellow Sea with low BSi and high clay minerals. The solid to solution ratio was found to have a great influence on BSi measurement, which can induce uncertainties up to 75%. The effect of loss by sorption and centrifugation is negligible. Interlaboratory comparison of techniques for BSi measurement by the wet alkaline extraction technique of Mortlock and Froelich [Deep-Sea Res. 36 (1989) 1415-1426] with clay correction was suggested to give no significant differences. However, differences in sediment compositions and reagent to sample ratio may limit the application of the wet alkaline extraction method.     

Risk-based decision-making for drilling waste discharges using a fuzzy synthetic evaluation technique

Offshore petroleum drilling wastes contain toxic substances that are potentially harmful to the marine ecosystem. Despite environmentally benign characteristics, wastes associated with synthetic-based fluids still contain a certain amount of pollutants due to contamination with formation oil and the presence of trace heavy metals in barite, which may pose risk when discharged into the marine environment. A framework is presented here for a decision support system for the selection of the best drilling waste discharge option. Uncertainties in the quantification of risk, cost and technical feasibility are expressed by fuzzy numbers. An analytical hierarchy process with a technique called fuzzy synthetic evaluation is employed to determine the best management alternative (discharge scenario).     

A response‐based decoupling criterion for multiply‐supported secondary systems

It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd.     

汾河口傍河水源地激发补给量研究

该文阐述傍河水源地地下水资源构成和补给特性。利用野外试验与室内数值模拟相结合方法，分析汾河口傍河水源地可采水资源量，数值模型刻画黄河实际摆动边界，考虑潜水延迟给水和极端干旱气候条件等多种方案；利用环境同位素技术追踪傍河水源地开采条件下的河水激发补给过程和补给强度。研究表明，在渗透性较好的常年性河流旁建立的水源地，具有抵御极端气象、水文环境以丰补歉的能力，枯水年动用的含水层储存量。丰水年恢复性强。     

大兴安岭浅覆盖区生态地质评价方法初探——以1∶25万区调呼中镇幅为例

通过野外调查，在收集统计大量基础地质、经济地质、环境地质、旅游地质、农(林)业地质等数据信息的基础上，在GIS技术指导下，采用定量定性相结合的半定量分析评价方法，对森林浅覆盖区生态地质现状及各类资源的开发利用潜力进行了综合评价。在研究和探讨森林浅覆盖区生态地质综合评价方法的基础上，提出了森林浅覆盖区生态地质评价模型，确定了综合参数，划分了生态地质类型。     

数字城市规划系统关键技术分析

分析了数字城市规划系统的业务需求，介绍了其基础数据更新、工作流、无纸化办公、历史空间信息管理等主要关键技术，并对其进行了讨论。     

Geoid determination using adapted reference field, seismic Moho depths and variable density contrast

 The traditional remove-restore technique for geoid computation suffers from two main drawbacks. The first is the assumption of an isostatic hypothesis to compute the compensation masses. The second is the double consideration of the effect of the topographic–isostatic masses within the data window through removing the reference field and the terrain reduction process. To overcome the first disadvantage, the seismic Moho depths, representing, more or less, the actual compensating masses, have been used with variable density anomalies computed by employing the topographic–isostatic mass balance principle. In order to avoid the double consideration of the effect of the topographic–isostatic masses within the data window, the effect of these masses for the used fixed data window, in terms of potential coefficients, has been subtracted from the reference field, yielding an adapted reference field. This adapted reference field has been used for the remove–restore technique. The necessary harmonic analysis of the topographic–isostatic potential using seismic Moho depths with variable density anomalies is given. A wide comparison among geoids computed by the adapted reference field with both the Airy–Heiskanen isostatic model and seismic Moho depths with variable density anomaly and a geoid computed by the traditional remove–restore technique is made. The results show that using seismic Moho depths with variable density anomaly along with the adapted reference field gives the best relative geoid accuracy compared to the GPS/levelling geoid. Received: 3 October 2001 / Accepted: 20 September 2002 Correspondence to: H.A. Abd-Elmotaal     

地震前兆观测仪器标定问题的探讨

标定工作，在地震前兆观测仪器的研究，使用及所得数据的处理中均已成为一个不可少的环节，但缺少有关标定问题的基石性研究和讨论。本文就标定的定义、种类、目的、要求、存在的问题等做一粗线的讨论，以期今后加强这一工作的深入研究。     

碎石桩加固冷却塔地基效果的检测技术与质量评价

介绍了安阳电厂冷却塔碎石桩复合地基静载、动力触探、瑞利波法系列原位试验。根据试验结果，对冷却塔地基加固与改良效果及施工质量进行了评价。