西秦岭温泉花岗岩体岩石学特征及岩浆混合标志

温泉花岗岩体由酸性端元的寄主岩石和暗色微细粒镁铁质包体群及基性岩墙群组成。无岩浆混合作用或岩浆混合作用较弱区段，寄主岩石以似斑状二长花岗岩为主．显示正常的花岗岩结构构造岩浆混合作用强烈区段。岩石的异常结构构造十分发育．矿物之间自形程度差异显著．常见包晶反应、包含结构、交代边、熔蚀边、交代蚕食的港湾状结构构造及交代缝合线、矿物镶边、斜长石异常环带和矿物残留等，多见指示岩浆混合的标志性矿物针状磷灰石。暗色微粒包体中多见寄主二长花岗岩中的捕掳晶。包体的形态、结构构造以及与寄主岩石强烈地成分交换等均是岩浆混合作用的标志。     

辽南早元古代花岗岩的变形温度及其构造意义

辽南早元古代辽河群中片麻状花岗岩的变形温度显示出645—690℃,550—610℃和485℃±三组温度值,表明花岗岩遭受了三幕构造变形。而区域构造解析亦表明辽河群在早元古时期经历了三幕构造变动。花岗岩的温度系列与区域变形序列具有一致性,排除了花岗岩晚期构造侵位的可能性。变形温度以550—610℃居多,意味着该幕构造形迹保存最好。第三幕变形变质作用相对较弱,仅局部出现485℃的温度值。     

东天山黄山-镜儿泉过铝花岗岩矿物学、地球化学及年代学研究

对东天山黄山-镜儿泉一带黄山南、镜儿泉、图拉尔根沟三个过铝花岗岩作了岩相学、矿物学、地球化学、sr-Nd同位素和锆石U-Pb年代学研究.锆石U-Pb LA-ICP-MS原位定年测得黄山南岩体结晶年龄为259.9±1.4Ma(MSWD=0.86),图拉尔根沟岩体结晶年龄为275.4±8.3Ma(MSWD=29),均侵位于二叠纪碰撞后伸展环境.三个过铝花岗岩均具有低锶同位素初始比值(Isr=0.6969～0.70396)、高εNd(t)值( 5.5～ 7.2)以及年轻的亏损地幔单阶段模式年龄(tDM=0.48～0.56Ga),表明其岩浆源区均为来源于亏损地幔的新生地壳岩石.这种新生地壳岩石可能为偏酸性的火山岩.三个岩体的矿物学和地球化学可分为两类:一类以黄山南白云母花岗岩为代表,为强过铝花岗岩(A/CNK>1.1),强烈亏损Ba、sr和Ti而富集Cs、Rb和K,具有高的Rb/sr(2.03～14.5)和Al2O3/TiO2(110～1592),低的Nb/Ta(3.24～6.76)比值,其稀土元素配分曲线呈"V"字形,显示强烈铕亏损(Eu/Eu*=0.04～0.55),表明这类岩体的直接源岩以泥质岩为主.另一类以图拉尔根沟二云母花岗岩为代表,为弱过铝(1   

河南桐柏老湾花岗岩体锆石SHRIMP U-Pb年龄及其地质意义

通过对河南桐柏老湾花岗岩体开展锆石SHRIMP U-Pb测年,获得了一个高精度的U-Pb年龄(132.5±2.4)Ma,比较可靠地限定了老湾花岗岩体的形成时代属于燕山中期,而不是前人所认为的燕山晚期.结合区域构造-岩浆活动时间,认为在燕山中期,桐柏及其邻区存在次比较重要的构造-岩浆事件,老湾花岗岩体是这次构造-岩浆活动事件的产物.     

杭州泗岭铝质A型花岗岩的发现及其构造意义

初步研究表明,以往被认为是典型的S型花岗岩或改造-重熔型花岗岩的泗岭岩体应为铝质A型花岗岩。该岩体高硅、碱、钾而明显贫钙、镁;高(K2O Na2O)/CaO值(平均16.79)和AKI指数(平均0.92);FeO*/MgO比值大(平均13.95),高于M型、S型和I型花岗岩,而与世界A型花岗岩平均值(13.4)相近;岩石为弱碱性、准铝-弱过铝质,富含稀土元素、HFSE元素,高Rb、F和Nb,反映其具A型花岗岩的成分特征。泗岭岩体氧同位素δ18O为 8‰～ 9‰,反映岩浆主要起源于下地壳。该岩体侵位于拉张的构造环境,是晚白垩世早期一次重要的构造-岩浆热事件,同时也反映了区域性孝丰—三门湾大断裂与学川—湖州大断裂在晚白垩世早期处于拉伸阶段。     

石榴石橄榄岩的熔融实验及其地质意义

在20×10~9Pa和25×10~9Pa条件下,对石榴石橄榄岩进行的14次高温高压熔融实验研究表明,在1600℃时石榴石橄榄岩开始熔融(初熔),熔体中的SiO_2>70％,Na_2O+K_2O>8％,类似于A型花岗岩成分。本实验为地幔花岗岩的成因提供了证据。     

Fatigue Behavior of Plain Concrete Under Biaxial Compression: Experiments and Theoretical Model

The effects of different lateral confinement stress on the fatigue behavior of and cumulative damage to plain concrete are investigated experimentally. Eighty 100 mm x 100 mm x 100 mm specimens of ordinary strength concrete are tested under constant- or variable-amplitude fatigue loading and lateral confinement pressure in two orthogonal directions. A fatigue equation is developed by modifying the classical Aas-Jakobsen S-N equation for taking into account the effect of the confined stress on fatigue strength of plain concrete. The results of variable-amplitude fatigue tests indicate that the linear damage theory proposed by Palmgren and Miner is unreasonable in the biaxial stress state. A nonlinear cumulative damage model that could model the effects of the magnitude and sequence of variable-amplitude fatigue loading and lateral confinement pressure is proposed on the basis of the evolution laws of the residual strains in the longitudinal direction during fatigue tests. The residual fatigue life predic     

关于修改港工钢筋混凝土规范小偏心受压构件正截面强度计算的建议

本文提出在小偏心受压构件正截面强度计算中，取消弯曲抗压强度ｆｃｍ（Ｒｗ），采用轴心抗压强度ｆｃ，这与构件的实际破坏形态相符。对小偏心受压构件正截面强度计算提出了设计建议。特别是对工程上大量应用的矩形截面对称配筋小偏压构件提示了简捷的设计方法，与以往的近似计算方法相比具有物理概念明确，精度高，方法简捷的特点。     

Comparison of Strain-rate Dependent Stress-Strain Behavior from Ko-consolidated Compression and Extension Tests on Natural Hong Kong Marine Deposits

This article presents results from a series of K_o-consolidated compression and extension triaxial tests on specimens from undisturbed samples of Hong Kong Marine Deposits (HKMD). To investigate the strain-rate effects, a total of seven K_o-consolidated triaxial tests were conducted including four compression tests and three extension tests. After K_o-consolidation, the triaxial test specimens were sheared at step-changed axial strain rates under three different confining pressures of 50 kPa, 150 kPa, and 400 kPa, respectively. The step-changed strain rates were applied in the following order: +2%/h, +0.2%/h, +20%/h, -2%/h (unloading) and +2%/h (reloading) for the four compression tests and -2%/h, -0.2%/h, -20%/h, +2%/h (unloading) and -2%/h (reloading) for the three extension tests. The results are reported and analyzed in the paper. The results show that the strain rate effects, the stress-strain characteristics, and the effective stress paths of the specimens for tests in a compression state are different from those for tests in an extension stage. One order of magnitude increase in axial strain rate causes an average 8.6% increase in undrained shear strength for compression tests and a 12.1% increase for extension tests. It is also found that the failure mode of the specimens in compression is different from that in extension. The stress-strain behavior of specimens shows strain-softening and a clear shear band in compression tests, but strain-hardening without any clear shear band in extension tests for the same absolute value of axial strain.