Late Quaternary submarine bedforms and ice‐sheet flow in Gerlache Strait and on the adjacent continental shelf,Antarctic Peninsula

Geophysical data from Gerlache Strait, Croker Passage, Bismarck Strait and the adjacent continental shelf reveal streamlined subglacial bedforms that were produced at the bed of the Antarctic Peninsula Ice Sheet (APIS) during the last glaciation. The spatial arrangement and orientation of these bedforms record the former drainage pattern and flow dynamics of an APIS outlet up‐flow, and feeding into, a palaeo‐ice stream in the Western Bransfield Basin. Evidence suggests that together, they represent a single ice‐flow system that drained the APIS during the last glaciation. The ice‐sheet outlet flowed north/northeastwards through Gerlache Strait and Croker Passage and converged with a second, more easterly ice‐flow tributary on the middle shelf to form the main palaeo‐ice stream. The dominance of drumlins with low elongation ratios suggests that ice‐sheet outlet draining through Gerlache Strait was comparatively slower than the main palaeo‐ice stream in the Western Bransfield Basin, although the low elongation ratios may also partly reflect the lack of sediment. Progressive elongation of drumlins further down‐flow indicates that the ice sheet accelerated through Croker Passage and the western tributary trough, and fed into the main zone of streaming flow in the Western Bransfield Basin. Topography would have exerted a strong control on the development of the palaeo‐ice stream system but subglacial geology may also have been significant given the transition from crystalline bedrock to sedimentary strata on the inner–mid‐shelf. In the broader context, the APIS was drained by a number of major fast‐flowing outlets through cross‐shelf troughs to the outer continental shelf during the last glaciation. Copyright © 2004 John Wiley & Sons, Ltd.     

An investigation of subglacial processes at the microscale from Briksdalsbreen, Norway

The subglacial processes at Briksdalsbreen, Norway, are examined by a combination of sedimentology, thin section and scanning electron microscope (SEM) analysis of till samples from an exposed subglacial surface and from beneath the glacier. Studies of a fluted surface indicate that subglacial deformation is occurring on a field scale with flutes forming behind most clasts 0·6 m high. At the thin section scale (0·014–2·0 mm) it is seen that deformation is by rotation and attenuation and is dependent on till texture. At the SEM scale (0·1–0·4 mm) it is seen that erosion is controlled by abrasion and percussion which produces distinct grain ‘styles’ as part of an erosional continuum. Overall it is shown that rotation and attenuation is a dominant process at all scales and that the clast interactions associated with different scale perturbations within the shear zone control erosion and deposition, as well as landform and fabric production.     

Groundwater flow and velocity in a 500 ka pre-Illinoian till, eastern Iowa

Few hydrology studies have investigated glacial till older than Illinoian time (> 300,000 BP) despite these older tills overlying a large portion of North America. An 8- and 6-well monitoring well nest installed into a 31 m thick pre-Illinoian till sequence near Cedar Rapids, Iowa was characterized using traditional hydrologic methods and chemical tracers. The aquitard system consists of about 9 m of fine-grained oxidized pre-Illinoian till overlying 22 m of unoxidized till and Devonian dolomite bedrock. Hydraulic conductivity ranged from 10⁻⁷ m/s in oxidized till and 10⁻¹⁰ m/s in unoxidized till. Hydraulic head relations indicated downward groundwater flow through the till profile with hydraulic gradients steepest near the unoxidized till/bedrock interface. Tritium and nitrate concentrations indicated recent (< 50 years old) recharge to a depth of 9–12 m below land surface. ¹⁸O and ²H results ranged between −6.2 to −7.9% and −38.0 to −50.9%, respectively, and plotted near the local Meteoric Water Line. A 1 per mil shift toward less negative ¹⁸O values with depth may suggest a climate change signal contained in the till water but more data are needed to verify this trend. Vertical groundwater velocity through the unoxidized till was estimated to range from 0.4 to 5.7 cm/year. The thickness of unoxidized pre-Illinoian till in Linn County was estimated from available records and contoured against vertical travel times to evaluate the effectiveness of pre-Illinoian till in preventing nitrate migration to underlying bedrock aquifers.     

天山1号冰川厚度和冰下地形探测与冰储量分析

通过对天山乌鲁木齐河源 1号冰川的雷达回波探测 ,清晰地揭示出冰川底部冰 /岩界面的位置及其起伏变化特征 ,显示出雷达波对山地冰川良好的穿透能力和对冰下地形的高分辨能力 ,冰川雷达测厚的误差小于 1 .2 %。研究结果显示 ,1号冰川东支冰川平均厚度为 5 8.77m ,西支冰川平均厚度为 44.84m ,冰体厚度最大值发育于冰川中部趋于主流线位置。冰川冰储量计算表明 ,东支冰储量为 0 .0 5 1 868km3,西支冰储量为 0 .0 2 0 2 1 0km3。表面和底部地形有明显差异 ,主要因冰川动力过程对基岩强烈的地貌作用所致 ,意味着冰床的起伏地形对冰川浅层冰体的运动过程影响不显著。     

Water and sediment outbursts from advanced Franz Josef Glacier,New Zealand

The Franz Josef Glacier, Westland, New Zealand, has a history of catastrophic sediment‐laden outburst ?oods associated with extreme rainfall events when the glacier toe is advanced over its own sediments. Consideration of these events and inspection of recent sediment deposits suggest that there are three distinct modes of outburst. The ?rst is associated with fans fed by over?ow along the glacier margin. As the glacier has advanced across its own fore?eld gravels, it is inferred that the primary drainage conduit has developed a reach of negative slope. In high ?ows massive boulders can block the conduit, trapping lesser clasts. The resulting backup of water causes over?ows through marginal moulins, producing the fan type of deposit. The second type of outburst deposits massive imbricated boulders at a greater or lesser distance from the glacier portal. In this case, pressure buildup drives the blockage out of the portal where the boulders deposit. Smaller materials are generally carried away. The third type consists of very shallow ?ows, and produces massive gravel deposits of uncertain provenance. In this condition, the excess pressure in the conduit results in slight uplift of the glacier and widespread discharge of water and sediment below the glacier snout; gravels and smaller sediments are laid down in a massive deposit across the fore?eld. The massive, boulder‐veneered deposit from the December 1995 outburst is interpreted in the light of the above mechanisms as a hyperconcentrated ?ow deposit from hydraulic jacking, overlain by boulders emplaced by a subsequent conduit outburst. A possible association of outbursts with the present advanced position of the glacier is suggested. Copyright © 2003 John Wiley & Sons, Ltd.     

Observing artificially induced strain: implications for subglacial deformation

By analysing a series of four successive thin‐sections from a ceramic clay that was subjected to uniaxial compression, we were able to monitor the development of microstructures in a fine‐grained sediment. The artificially induced microstructures, such as unidirectional clay reorientations and linear and circular grain arrangements, are identical to features that have been observed in thin‐sections of subglacially deformed tills, and therefore may be used as representative analogues. We argue that the structures, reflecting slip, planar shear displacements as well as rotational movements, can be explained by assuming a Coulomb‐plastic response to imposed shear. We conclude that sediments subjected to subglacial deformation behave as Coulomb materials, at least during the final stages of the deformation. The present study bridges the gap between field studies, experimental studies and theoretical modelling. The microscopic observations assist in visualising inferred subglacial processes and facilitate up‐ and downscaling between diverse methodological approaches. Copyright © 2003 John Wiley & Sons, Ltd.     

Electrokinetic remediation of metal contaminated glacial tills

This paper presents the results of an experimental investigation which studied the feasibility of using the electrokinetic process to remediate contaminated clays of glacial origin, otherwise known as glacial tills. An overview of the electrokinetic phenomena, as well as previously performed laboratory and field investigations, is first presented. The methodology of the electrokinetic experiments which were conducted to investigate the removal of metals from a glacial till is then described. A total of 16 experiments were conducted using glacial till samples obtained from a project site near Chicago. Sodium and calcium were used as the surrogate cationic metallic contaminants. These experiments demonstrated that ion transport during the electrokinetic process occurs due to both electro-osmosis and electromigration, but that due to electromigration is significantly higher than that due to electro-osmosis. Unlike other clays such as kaolinite, the glacial till used for this investigation possessed high buffering capacity because of its high carbonate content which prevented the acid front migration from the anode to the cathode during the electrokinetic process. The ion removal efficiency of the electrokinetic process was found to increase when: (1) the voltage gradient applied to the soil was increased, (2) the initial concentration of the contaminants was increased, and (3) the duration of the treatment process was increased. The ion removal efficiency was also greater for smaller ions which possess less ionic charge and when the ions existed independently in the soil as compared to when they coexisted. This investigation suggests that the electrokinetic process has significant potential for remediating glacial tills contaminated with metals. However, the properties of Na and Ca are not representative of contaminants, such as heavy metals, so further investigations are needed.     

Basal sediment evacuation by subglacial meltwater: suspended sediment transport from Haut Glacier d'Arolla,Switzerland

Proglacial suspended sediment transport was monitored at Haut Glacier d'Arolla, Switzerland, during the 1998 melt season to investigate the mechanisms of basal sediment evacuation by subglacial meltwater. Sub‐seasonal changes in relationships between suspended sediment transport and discharge demonstrate that the structure and hydraulics of the subglacial drainage system critically influenced how basal sediment was accessed and entrained. Under hydraulically inefficient subglacial drainage at the start of the melt season, sediment availability was generally high but sediment transport increased relatively slowly with discharge. Later in the melt season, sediment transport increased more rapidly with discharge as subglacial meltwater became confined to a spatially limited network of channels following removal of the seasonal snowpack from the ablation area. Flow capacity is inferred to have increased more rapidly with discharge within subglacial channels because rapid changes in discharge during highly peaked diurnal runoff cycles are likely to have been accommodated largely by changes in flow velocity. Basal sediment availability declined during channelization but increased throughout the remainder of the monitored period, resulting in very efficient basal sediment evacuation over the peak of the melt season. Increased basal sediment availability during the summer appears to have been linked to high diurnal water pressure variation within subglacial channels inferred from the strong increase in flow velocity with discharge. Basal sediment availability therefore appears likely to have been increased by (1) enhanced local ice‐bed separation leading to extra‐channel flow excursions and[sol ]or (2) the deformation of basal sediment towards low‐pressure channels due to a strong diurnally reversing hydraulic gradient between channels and areas of hydraulically less‐efficient drainage. Copyright © 2005 John Wiley & Sons, Ltd.