A critical state model for sands dependent on stress and density

An elastoplastic model for sands is presented in this paper, which can describe stress–strain behaviour dependent on mean effective stress level and void ratio. The main features of the proposed model are: (a) a new state parameter, which is dependent on the initial void ratio and initial mean stress, is proposed and applied to the yield function in order to predict the plastic deformation for very loose sands; and (b) another new state parameter, which is used to determine the peak strength and describe the critical state behaviour of sands during shearing, is proposed in order to predict simply negative/positive dilatancy and the hardening/softening behaviour of medium or dense sands. In addition, the proposed model can also predict the stress–strain behaviour of sands under three-dimensional stress conditions by using a transformed stress tensor instead of ordinary stress tensor. Copyright © 2004 John Wiley & Sons, Ltd.     

The importance of oxygen isotope provenance in relation to solute content of bulk meltwaters at Imersuaq Glacier,West Greenland

Stable oxygen isotope analysis and measurement of several dissolved cations and anions of bulk meltwater samples have provided information about the hydrochemical environment of the glacial hydrological system at Imersuaq Glacier, an outlet tongue from the Greenland ice‐sheet, West Greenland. The samples were collected at frequent intervals during the period 20–28 July 2000 in a small (<20 L s^?1) englacial meltwater outlet at the glacier margin. The results document the following findings: (i) a marked diurnal variation of δ¹⁸O is related to the composition of oxygen isotope provenances, mainly near‐marginal local superimposed ice and basal up‐sheared ice further up‐glacier; (ii) a relationship is seen between all base cations (Na⁺, K⁺, Ca²⁺, Mg²⁺), SO₄^2? and δ¹⁸O, indicating that solute acquisition is provided by solid–solution contact with the up‐sheared ice—as the relationship with Cl^? is weak the influence of seasalt‐derived solutes is small in the area; (iii) when the melt rate is high, two diurnal maxima of δ¹⁸O values and solute concentrations are measured, and it is suggested that a snow meltwater component is responsible for the second maximum of δ¹⁸O—a short residence time leads to a delayed decrease in ion concentrations. Copyright © 2003 John Wiley & Sons, Ltd.     

Variation of the plasma turbulence in the central plasma sheet during substorm phases observed by the interball/tail satellite

Fluctuations of the plasma bulk velocity across the plasma sheet are studied using single-point measurements from the Corall instrument on board the Interball/Tail satellite. Several hour-long intervals of continuous data corresponding to quiet geomagnetic conditions and different phases of isolated substorms are analyzed. The plasma sheet flow appears to be strongly turbulent, i.e. dominated by fluctuations that are unpredictable. Corresponding eddy diffusion coefficients were obtained as a function of the autocorrelation time and rms velocity of the fluctuations. It was found that the amplitude of the turbulence and the values of eddy-diffusion coefficients increase significantly during substorm growth and expansion phases and they decrease to their initial level during the recovery phase. We also studied a relationship between the eddy-diffusion coefficients and the absolute value of the geomagnetic field, also measured by the Interball/Tail satellite. It was found that this relationship varies depending on the phase of substorm, indicating possible change in the turbulence regimen with substorm phase.     

Energetic Particles Observed in the CUSP Region During a Storm Recovery Phase

In this paper we report energetic ion behavior and its composition variations observed by the Cluster/RAPID instrument when the spacecraft was travelling in the high latitude magnetospheric boundary region on the day of the 31 March, 2001, strongest magnetic storm in the past 50 years. The Dst index reached −360 nT at about 09:00 UT. During its early recovery phase, large amounts of oxygen and helium ions were observed; the ratio of oxygen to hydrogen in the RAPID energy range reached as high as 250%, which suggests that the observed energetic particles might be of magnetospheric origin. The observations further show that enhanced energetic electron fluxes are confined in a very narrow region, while protons have occupied a larger region, and heavy ions have been observed in an even larger region. The flux of energetic electrons show a slight enhancement in a region where the magnetic field magnitude is around zero. These observed energetic ions could be quasi-trapped by the current sheet in the stagnation region of the cusp.     

萨拉乌苏河流域萨拉乌苏组砂丘砂沉积特征

The Salawusu Formation of Milanggouwan section in Salawusu River Valley includes 7 layers of paleo-mobile dune sands, and 4 layers of paleo-fixed and semi-fixed dune sands. Their structures have been observed and their grain size, surface textural features and several main chemical elements have been analyzed. The results showed that： 1） Some of the aeolian structural characteristics of these dune sands are similar to that of the recent dune sands. 2） They are also similar to the recent dune sands in grain size components, and parameters of Mz,σ, Sk and Kg, as well as in several main chemical components. 3） The scattergrams of Mz-σ and SiO2-Al2O3＋TOFE and the probability curves of grain size showed that these paleo-dune sands are different from paleosols and fluvio-lacustrine facies, but are consistency with recent dune sands. 4） Quartz sands have well roundness and surface textural features such as dish-shaped pits, crescent-shaped pits, pockmarked pits, upturned cleavage plates, siliceous precipitates and siliceous crevasses, indicating that they had been carried for a long time by the wind. As the 11 layers of paleo-dune sands possess the aeolian characteristics in structure, grain size, surface textural features and chemical elements, the origin of their formation should be attributed to eolation.     

格型钢板桩结构有限元数值分析

以有限元软件ABAQUS作为分析平台,建立波浪荷载作用下格型钢板桩结构稳定性及应力分析的三维弹塑性有限元分析模型。格型钢板桩采用壳体单元模拟,在相邻板桩之间设置铰接连接器模拟板桩之间的相对转动;土体采用Mohr-Coulomb本构模型模拟,在格型钢板桩与其内、外土体之间设置接触面单元模拟它们之间的滑移、张裂和闭合。结合某实际工程,研究结构的破坏模式、失稳特性和应力分布特性,分析参数变化对结构稳定性和环向拉力的影响,并对格内土体的剪切变形进行分析,建议格型钢板桩锁口拉力的验算断面。结果表明,铰接连接器的设置对于结构稳定性影响不大,但对环向拉力有一定影响;格内土体的剪切变形主要发生在格体中轴处,符合太沙基法结论。     

水平切变线上涡层不稳定理论

文中打破了传统的 Kelvin- Helmholtz研究切变不稳定的观点 ,考虑了强涡度切变存在时切变线已构成了一个涡层 ,这时切变线的不稳定问题就变为涡层的不稳定问题。同时考虑由涡层所产生的诱导速度 ,从理论上得到了水平切变线上涡层不稳定必要条件的判据 ,即必须满足 (1 - Rv Rid) >0 ,且有 U(y,t) >U(A(t) )与之相配合。这表明环境场的配置制约着切变线上扰动的发展 ,这种中尺度扰动同环境场存在着相互作用。文中还用具体个例对如何计算不稳定必要条件做了解释和说明。     

对秦岭造山带几个重大问题的认识

详细讨论了秦岭一大别造山带的几个重大问题，对它的发展阶段进行了新的划分，对其形成发表了新的观点：认为秦岭造山带、华北板块、扬子板块是中生代以来，在抽拉－逆冲岩片构造体制作用下形成的。对秦岭一大别造山带的表层构造特征以及它和深层构造的关系、花岗岩的成因类型、断层与界面的区分及成矿作用等都提出了和以往不同的认识。     

Simplified multi-block constitutive model predicting earthquake-induced landslide triggering and displacement along slip surfaces of saturated sand

Slopes consisting of saturated sand have recently moved down-slope tens or hundreds of meters under the action of earthquakes. This paper presents a simplified but accurate method predicting the triggering and displacement of such landslides. For this purpose, a simplified constitutive model simulating soil response of saturated sands along slip surfaces is proposed and validated. Then, this constitutive model is coupled with the multi-block sliding system model to predict the triggering and displacement of such slides. The multi-block model considers a general mass sliding on a trajectory which consists of n linear segments. The steps needed to apply this method are described in detail. The method was applied successfully to predict the triggering, the motion and the final configuration of the well-documented (a) Higashi Takezawa, (b) Donghekou and (c) Nikawa earthquake-induced slides.     

Analysis of shaft resistance of jacked piles in sands

In recent years, pile jacking has become a viable alternative installation method for displacement piles. Pile jacking produces minimal noise, vibration and air pollution during installation. In addition, it is possible, at the end of jacking, to have a good estimate of the ultimate static capacity of the pile. In this paper, the shaft resistance of piles jacked into sand is studied using one‐dimensional finite element analysis. The finite element simulations, using a two‐surface plasticity model, demonstrate the effects of relative density and confinement on the unit shaft resistance of piles jacked in sand. The impact of the number of jacking strokes on the unit shaft capacity is also assessed. Based on the numerical results, we developed equations for shaft resistance quantifying the effects of relative density, initial confinement and number of jacking strokes. Predictions using these equations are compared with data obtained from centrifuge tests and field tests. Copyright © 2010 John Wiley & Sons, Ltd.