Multiple longshore sand bars in the upper Chesapeake Bay

In the upper Chesapeake Bay (Maryland, U.S.A.) field surveys were conducted at 18 multiple longshore sand bar sites. The multiple bar systems were found in water depths less than approximately 2 m (mean sea level), and exhibited mild bottom slopes of 0·0052 or less. The number of bars composing each system ranged from four to 17 and the spacing between the crests typically increased in the offshore direction, ranging from 12 to 70 m. Bar height also typically increased with distance offshore and ranged from 0·03 to 0·61 m. A grain size analysis of crest and trough sediment did not reveal any significant differences and the sediment was categorized as ‘fine sand’. A review of the literature data indicated that the Chesapeake Bay multiple bars possessed similar characteristics to those found in Gelding Bay (Baltic Sea); similarities in fetch, wave height and tidal range between the two bays may account for this finding. The surf-scaling parameter indicated that the multiple bar systems were extremely dissipative with regard to wave energy, and wave height appeared to be an important factor in controlling bar spacing and bar height. A multiple wave break point hypothesis was discussed as a possible mechanism for the formation of Chesapeake Bay multiple longshore bars, and limited observational evidence appeared to support such a mechanism.     

Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry

Experimental results are presented from the extensive program of drained plane strain compression tests on sand carried out in Grenoble over the last two decades. Systematic analysis of photographs of the deforming specimen allowed for measuring deformations and determining strain fields throughout the test, that is: prior to, at, and after the onset of strain localization. The principles, details and accuracy of the procedure are described, as well as its suitability to properly depict the patterns of deformation. Findings concerning the occurrence and progression of strain localization are discussed. The issues of shear band orientation and thickness are addressed, as well as temporary and persistent complex localization patterns, and the volumetric behaviour inside a band after its formation. The influence of such variables as initial state of the sand (effective stress and relative density), specimen size and slenderness, as well as grain size, is discussed. Copyright © 2004 John Wiley & Sons, Ltd     

The characteristics of Asian dust events in Northeast Asia during the springtime from 1993 to 2004

The characteristics of Asian dust events that occurred in Northeast Asia during the springtime from 1993 to 2004 are investigated using 3-hourly SYNOP reports (World Meteorological Organization). Occurrences of blowing sand and dust storm are low in 1997 and 1999, but have increased rapidly since 2000. The maximum occurrence was recorded in 2002. Wind velocity of 6.5 m s^− 1 as a threshold wind velocity is not so exactly consistent with the occurrence of blowing sand. However, wind velocity of 14 m s^− 1 as a strong wind causing dust storm had similar tendency to those of dust storm and Dust Storm Index.Source regions of Asian dust are divided into three regions (A: dry arid, B: semi-arid, and C: cultivated), based upon the occurrence of blowing sand and dust storm. Eight meteorological stations are selected in three regions, which have frequent occurrences of blowing sand. Source regions of Asian dust that affect the Korean peninsula are gradually extending eastward. Positive anomalies of NDVI occurred in 1994, 1995, and 1998 when temperature was high and precipitation was heavy. However, the frequent occurrence of the dust phenomena is not always consistent with lots of vegetation, high temperature, and much precipitation in this study.     

胶东“玲珑-焦家式”金矿资源潜力与找矿

“玲珑焦家式”金矿的成岩成矿,从新太古代至中生代存在着继承性的成因关系,成矿具有长期性、多源性特点,但中生代燕山早期岩浆活动是主导成矿因素。区域化探成果显示胶东金矿直接矿源岩———郭家岭花岗岩金的丰度比原始矿源岩———早前寒武纪变质沉积岩系及侵入岩系金的丰度低1/2。郭家岭花岗岩面积在2 km2以上岩体定量估计金亏损总量与胶东金矿总量预测的资源量相当,从一个侧面展现了胶东金矿资源的潜力。望儿山金矿的找矿实践展示,焦家式金矿在1 000 m以下尚有巨大潜力,整个胶东金矿产区在3 000 m以上的资源潜力应在5000 t以上。     

ELECTROCHEMICAL CORROSION BEHAVIOR OF STEEL IN THE JUNCTURE AREA OF SEA CLAY AND SAND

Corrosion behavior of steel in the juncture area of sea clay and sand was studied. The results show that galvanic corrosion occurred between steel samples buried in sea clay and sand, and that the polarity of the galvanic cell reversed after some testing later. The cause of reversing of polarity is discussed.     

山东省黄金资源可持续开发利用

本文扼要介绍了山东省金矿地质勘查、开发现状及存在的环境问题 ,为确保山东省黄金资源可持续开发利用 ,提出要保证黄金资源的可持续供给 ,要在资源开发过程中保护好环境 ,以及要高度重视地勘单位和矿山企业自身的可持续发展等建议。     

陕西秦巴山区农业自然资源开发利用

农业自然资源据其在农业利用过程中的地位可分为两类:一类是生成农业自然资源的环境,另一类为可资直接利用的自然生成物(即狭义的农业自然资源)。陕西秦巴山区自然环境的主要特点是:复合山体高峻庞大,地跨暖温带和北亚热带,垂直分异明显。区内有:森林、草场、野生生物、林特产与农作物等多种农业自然资源。据此,提出了本区农业自然资源的开发利用途径。     

彭州市立体农业气候资源的研究(二)热量资源分析

利用彭州市境内市气象站，新兴，白果坪的日平均气温资料，进行热量资源分析。结果表明，彭州市7－8月为最热月，多年平均温度低于24．9℃，12－2月为最冷月，多年平均温度高于1．7℃。大多数年全年稳定通过0℃，可一年四季进行农业耕作，有利于作物越冬和多年生作物的种植，生长期长，积温丰富。界限温度的初，终日期及持续日数变化较大，积温际变化显著，热量资源随海拔高度增加而减少，各界限温度的初日推迟，终日提前，持续日数和积温减少，温度强度也降低，形成显著的立体农业气候。     

石英砂扫描电镜在漓江“泥砾”成因中的应用

本文根据扫描电镜对从漓江河谷钻孔中的泥砾层取得的481粒石英砂表面形态特证研究结果:石英砂多数颗粒保持棱角状外形并遭受不同程度的磨蚀,具阶状贝壳断口,平直或弧形刮削面和多向擦痕,沿解理面破碎呈“V”字形沟和撞击碟形坑,以及微溶蚀孔、隙、蜂窝状溶孔群和SiO_2再沉积等表面形态结构特征。认为它是在第四纪古地理湿热气候条件下泥石流沉积的产物,物源可能来自境内或周边的泥盆系砂岩和境外的花岗岩。     

硅藻土资源及开发利用概况

文章主要介绍了硅藻土的资源概况及特点和开发利用的现状,对硅藻土及制品的市场发展前景进行了分析.