Experimental constraints on the effects of pressure and H2O on the fractional crystallization of high-Mg island arc basalt

H₂O-undersaturated melting experiments of synthesized basalt (SiO₂ = 50.7 wt.%, MgO = 8.3 wt.%, Mg# = 60) were conducted at fO₂ corresponding to NNO+1 and NNO−1 to clarify the effects of pressure (2–7 kbar) and H₂O on fractional crystallization in island arcs. H₂O content was ranged from nominally anhydrous to 4.4 wt.%. Differentiation trends, namely the liquid lines of descent, change sensitively according to pressure-H₂O relations. Tholeiitic differentiation trends are reproduced with H₂O ≤ ∼2 wt.% in primary magma. With such quantities of H₂O, fractional crystallization is controlled by olivine + plagioclase at 2 kbar. Increasing the pressure from 2 to ≥4 kbar induces early crystallization of orthopyroxene instead of olivine and therefore SiO₂ enrichment in the residual melts is suppressed. Increasing H₂O (≥ ∼2 wt.% in primary magma) stabilizes clinopyroxene relative to orthopyroxene and/or magnetite. Although the phase relations and proportions strongly depend on fO₂ and H₂O content, differentiation trends are always calc-alkaline.     

Generation of random waves in time-dependent extended mild-slope equations using a source function method

We develop techniques of numerical wave generation in the time-dependent extended mild-slope equations of Suh et al. [1997. Time-dependent equations for wave propagation on rapidly varying topography. Coastal Engineering 32, 91–117] and Lee et al. [2003. Extended mild-slope equation for random waves. Coastal Engineering 48, 277–287] for random waves using a source function method. Numerical results for both regular and irregular waves in one and two horizontal dimensions show that the wave heights and the frequency spectra are properly reproduced. The waves that pass through the wave generation region do not cause any numerical disturbances, showing usefulness of the source function method in avoiding re-reflection problems at the offshore boundary.     

Factors involved in growth plasticity of cockles Cerastoderma edule (L.), identified by field survey and transplant experiments

In Arcachon Bay, a macrotidal coastal lagoon in southwest France, growth rates of cockles Cerastoderma edule (L.) differ greatly between locations. Sampling of populations at different tidal levels showed that the mean shell length was significantly and positively correlated with immersion time, whereas no correlation was found with population density and microphytobenthos biomass. Transplants of cockles between two intertidal sites were used to examine the relative importance of habitat and site of origin for growth rate and condition index. Artifacts due to manipulation were assessed, i.e. the impact of enclosures on growth, conditon index and mortality. During a 5-mo reciprocal transplant experiment, growth rates of the transplanted cockles and the cockles already present were similar, whereas the sites of origin did not affect growth rate. Condition index, however, displayed significant differences in relation to both transplant and origin sites. During a further 6-mo experiment in which cockles were transplanted from one site to four new sites, growth was mainly influenced by tidal level. These results indicate that net growth started when cockles were immersed 30% of the time. It is concluded that, on the scale of Arcachon Bay (156 km²), differences in growth and condition between cockle populations are largely phenotypic. Tidal level (i.e. food supply and emersion stress) accounts for most of these differences, but the existence of genetically or physiologically different populations cannot be excluded.     

Numerical study of enhanced energy dissipation near a seamount

Using a two-dimensional primitive equation model, we examine nonlinear responses of a semidiurnal tidal flow impinging on a seamount with a background Garrett-Munk-like (GM-like) internal wavefield. It is found that horizontally elongated pancake-like structures of high vertical wavenumber near-inertial current shear are created both in the near-field (the region over the slope of the seamount) and far-field (the region over the flat bottom of the ocean). An important distinction is that the high vertical wavenumber near-inertial current shear is amplified only at mid-latitudes in the far-field (owing to a parametric subharmonic instability (PSI)), whereas it is amplified both at mid-and high-latitudes (above the latitude where PSI can occur) in the near-field. In order to clarify the generating mechanism for the strong shear in the near-field, additional numerical experiments are carried out with the GM-like background internal waves removed. The experiments show that the strong shear is also created, indicating that it is not caused by the interaction between the background GM-like internal waves and the semidiurnal internal tides. One possible explanation is proposed for the amplification of high vertical wavenumber near-inertial current shear in the near-field where tide residual flow resulting from tide-topography interaction plays an important role in transferring energy from high-mode internal tides to near-inertial internal waves.     

深海资料浮标体及系泊系统的阻力试验研究

本文结合国家“七五”重点科技攻关项目“深海资料浮标”研制而进行浮标体和系泊系统的各种阻力试验研究，试验成果已直接应用于深海资料浮标系泊系统设计。实践表明本文介绍的各种阻力试验结果是可靠的。     

Simulation experiment on hydrocarbon generating potential of various source rocks on the northern margin of the Qaidam Basin,Qinghai, China

The northern margin of the Qaidam Basin is one of the main oil-gas exploration areas in western China, where source rocks are composed mostly of Middle and Lower Jurassic dark mud shale, carbargillite and coal. A large number of subsurface and outcrop samples differing in lithology with different types of organic matter were selected for resource evaluation, research and calculation. And among them, 13 samples were used for simulation experiment on hydrocarbon generating potential of various source rocks. At first, two kinds of heating modes were compared through simulation experiment, including single temperature-step heating and continual heating. Perhaps, the process of hydrocarbon generation and expulsion occurred naturally between a close system and an open system. In addition, the first heating mode was convenient, and all its reaction products were involved in the whole thermal evolution, and the final simulation experimental results were basically in consistency with the natural evolution trend Therefore, the first heating mode was adopted and the hydrocarbon yield of every sample was worked out. According to the type and lithology of organic matter and the hydrocarbon yield of samples for simulation experiment, hydrocarbon generation and expulsion mode with three kinds of lithology and five types of source rock has been established to provide the basis for hydrocarbon generation evaluation, research and resource calculation.     

某基坑工程土钉支护工作性状试验研究

通过对广州天河荟雅苑基坑工程土钉支护进行试验和研究,分析了土钉支护体系的工作性状,并为同类工程的设计提供了一定的依据。     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

库车坳陷侏罗系煤成气动力学模拟研究

应用黄金管—高压釜封闭体系热模拟实验与GC、GC-IRMS分析技术,结合KINETICS专用软件,对库车坳陷侏罗系煤成气进行了动力学模拟研究。库车坳陷侏罗系煤具有高的产气性,在高演化阶段主要产甲烷气;侏罗系煤热解气甲烷碳同位素为-36‰～-25‰,乙烷碳同位素为-28‰～-16‰;甲烷、C2-C5气态烃的生成活化能分别为(47～64k)calm/ol、(55～72k)calm/ol,频率因子各为5.265×1013s-1、5.388×1018s-1。在此基础上,进一步探讨了克拉2气田天然气的成因。研究认为,克拉2气田天然气属阶段捕获的煤成气,主要聚集了5～1Ma时期的天然气,其成熟度Ro分布范围为1.3%～2.5%。     

Experimental Study on Mine Spoils During Superficial Geochemistry Processes

Based on the mineral and chemical compositions of spoils taken from the Shilu Cu-Mo deposit and Hetai gold deposit, the leaching and batch experiments were made on spoils taken from these two deposits using the leaching column designed by the authors. The experimental results showed that it is not always true that the mine drainage is acidic. Its acidity depends on acid-buffering capacity of gangue, host rock and its alteration mineral assemblage. The composition of the drainage water is related with the interaction between superficial or underground water and solid materials in the spoils, including minerals, hydroxides and amorphous substances. The leaching extent of the element is related with its occurrence form in the deposit. The preferential flow results in leaching-out of heavy metals in large amounts. So it is important to prevent the generating of preferential flow in the system. The results will provide very important grounds for the comprehensive management of land and ecological rehabilitation of the mine site.