波浪作用下沙纹床面底层流动特性研究

涡动沙纹很大程度决定着床面阻力和波浪衰减,针对涡动沙纹作用下的绕流结构具有强二维特性,建立了立面二维曲线坐标下的数值模型.利用国外公开发表的试验数据进行验证,表明模型能模拟波浪作用下底层分离涡随时间、空间变化的动力特性,对底层流动的紊动特性、床面剪切应力的随时间、空间的变化以及涡动结构的尺度分别进行了讨论.     

Identification of Permian palaeowind direction from wave-dominated lacustrine sediments (Lodève Basin, France)

Lacustrine environments are an excellent indicator of continental palaeoclimate. In particular, the sedimentary record of waves in lakes may be used to constrain atmospheric palaeocirculation. Wave ripples have been identified in a Permian lacustrine basin (the Salagou Formation, 260–250 Ma, Lodève Basin) located in the southern French Massif Central, part of the western European Hercynian mountain chain. Wave ripple patterns are interpreted with regards to hydrodynamics and water palaeodepth. It is shown that, in the case of the Salagou Formation, wave ripple orientations were controlled by the direction of the prevailing palaeowind. The Late Permian wind blew from between north and 20° east of north, possibly over several millions of years and certainly throughout the period of deposition of about 2000 m of strata in the Lodève Basin. Permian lacustrine sedimentation is widespread and well preserved on the Earth's surface and so wave ripple data may help constrain numerical modelling of the Earth's past climates, especially with regards to Permian times outside of desert regions.     

Estimation of the wave-related ripple characteristics and induced bed shear stress

A large data set on ripples was collected and examined. A set of new formulas for the prediction of the ripple characteristics is proposed with an emphasis on the disappearance of the ripples. The ripple wavelength was observed to be proportional to the bottom wave excursion but also to be a function of the grain-related Shields parameter and wave period parameter introduced by Mogridge et al. (1994). The ripple steepness was found to be nearly constant for orbital ripples, and with a sharp decrease for suborbital ripples. Two empirical functions are added including the effects of the critical Shields parameters (inception of transport and inception of sheet flow), i.e. giving the boundaries for the ripple existence's domain. The proposed formulas yield better prediction capabilities compared to the previously published formulas, especially when ripples are washed out. The effect of the ripple characteristics on the roughness height and the calculation of the bed shear stress is also discussed. It appeared that the bed shear stress calculation is more sensitive to the empirical coefficient a_r introduced in the estimation of the ripple-induced roughness height or to the limits of existence of the ripples than the ripple characteristics themselves.     

On the modelling of sand bedforms using the semivariogram

This study shows the usefulness of the semivariogram for modelling sand ripples created by water flows of varied flow intensity. A combination of two mathematical functions is fitted to each sample semivariogram, that is an exponential (or stochastic) component and a periodic component. The parameters of each of these components have direct physical meaning. A non-dimensional ratio combining the two parameters of the exponential model is interpreted as a regularity index (which increases with the degree of regularity of bedform arrangement). This regularity index is inversely related to the Froude number of the flow. The non-dimensional wavelength, estimated from the dominant periodic function, is also inversely and closely related to the Froude number. The wave height, accurately estimated from properties of the two fitted components, is a direct function of flow velocity and is also proportional to the standard deviation of bed elevations. The bedform shape introduces a considerable discrepancy between the generally assumed normal frequency distribution and the empirical distributions of bed height. The series of bed elevations are generally characterized by a mixture of normal distributions having the same variance but different means. The calculation of a covariance assuming a constant and single mean (as in spectral analysis) can therefore be misleading and the problem may be avoided by using the semivariogram.     

Discrimination of small earthquakes and artificial explosions in the Korean Peninsula using Pg/Lg ratios

The purpose of this study is to develop a technique to discriminate artificial explosions from local small earthquakes ( M ≤ 4.0) in the time–frequency domain. In order to obtain spectral features of artificial explosions and earthquakes, 3-D spectrograms (frequency, time and amplitude) have been used. They represent a useful tool for studying the frequency content of entire seismic waveforms observed at local and regional distances (Kim, Simpson & Richards 1994). P and S(L g ) waves from quarry blasts show that the frequency content associated with the dominant amplitude appears above 10  Hz and Rg phases are observed at close distances. P and S(L g ) waves from the Tongosan earthquake have strong amplitudes below 10  Hz. For the Munkyong earthquake, however, a broader frequency content up to 20  Hz is found.
  For discrimination between small earthquakes and explosions, Pg/L g spectral ratios are used below 10  Hz, and through spectrogram analysis we can see different frequency contents of explosions and earthquakes. Unfortunately, because explosion data recorded at KSRS array are digitized at 20  sps, we cannot avoid analysing below 10  Hz because of the Nyquist frequency. In order to select time windows, the group velocity was computed using multiple-filter analysis (MFA), and free-surface effects have been removed from all three-component data in order to improve data quality. Using FFT, a log-average spectral amplitude is calculated over seven frequency bands: 0.5 to 3, 2 to 4, 3 to 5, 4 to 6, 5 to 7, 6 to 8 and 8 to 10  Hz. The best separation between explosions and earthquakes is observed from 6 to 8  Hz. In this frequency band we can separate explosions with log ( Pg/L g ) above −0.5, except EXP1 recorded at SIHY1-1, and earthquakes below −0.5, except the Munkyong earthquake record at station KMH.     

A wind tunnel investigation of particle segregation,ripple formation and armouring within sand beds of systematically varied texture

This paper reports on a wind tunnel investigation of particle segregation, ripple formation and surface armouring within sand beds of systematically varied particle size distribution, from coarsely skewed to bimodal. By design, the system was closed with no external inputs of mass from an external particle feed. Particles too coarse to travel in saltation for the given range in wind speed were dyed red in order to distinguish them in optical images from finer sand particles, which could be entrained into the unidirectional airflow. A 3D laser scanner measured the changing bed topography at regular time intervals during 18 experiments involving varied combinations of wind speed and bed texture. Image classification techniques were used to investigate the coincident self‐organization of the two populations of particles, as distinguished by their colour. As soon as saltation commenced, some of the red particles segregated into thin discontinuous patches. Particle trapping and sheltering on these rough patches was strongly favoured, causing them to grow preferentially. During the earliest stages of formation, bedform growth coincided with: (i) rapid coarsening of the surface texture; and (ii) the merging of proto‐ripple ‘crests’ to generate larger rhythmic bedforms of lower frequency. Consistent with previous work, ripple size was observed to increase under stronger winds when not exceeding the threshold for entrainment of the coarse‐mode or red particles from the crest. With declining rates of mass transport and particle segregation as the bed surface armoured, and the consequent deceleration of ripple propagation through to the end of each experiment, all surfaces eventually attained a steady‐state morphometry. At saturation, the largest ripples developed on beds having the lowest initial concentration of red particles. Copyright © 2016 John Wiley & Sons, Ltd.     

Experimental study of aeolian sand ripples in a wind tunnel

The topographic parameters and propagation velocity of aeolian sand ripples reflect complex erosion, transport, and deposition processes of sand on the land surface. In this study, three Nikon cameras located in the windward (0–1 m), middle (4.5–5.5 m), and downwind (9–10 m) zones of a 10 m long sand bed are used to continuously record changes in sand ripples. Based on the data extracted from these images, this study reaches the following conclusions. (1) The initial formation and full development times of sand ripples over a flatbed decrease with wind velocity. (2) The wavelengths of full development sand ripples are approximately twice the wavelengths of initially formed sand ripples. Both wavelengths increase linearly with friction velocity. During the developing stage of sand ripples, the wavelength increases linearly with time. (3) The propagation velocity of full development sand ripples is approximately 0.6 times that of the initially formed sand ripples. The propagation velocity of both initial and full development of sand ripples increase as power functions with respect to friction velocity. During the developing stage of sand ripples, the propagation velocity decreases with time following a power law. These results provide new information for understanding the formation and evolution of aeolian sand ripples and help improve numerical simulations. Copyright © 2017 John Wiley & Sons, Ltd.     

Granule ripples in the Kumtagh Desert,China: Morphology,grain size and influencing factors

Granule ripples are found mainly in four regions of the Kumtagh Desert in China; they are characterized by an asymmetrical shape, with gentle lower slopes on both sides and abrupt crests. The ripples tend to be oriented perpendicular to the prevailing winds, except when they form near obstacles such as yardangs. The wavelengths (λ) range between 0·31 m and 26 m and heights (h) range from 0·015 m to 1 m. The relationship between wavelength and height can be described by a simple linear function, and the mean ripple index (λ/h) is about 20·4 for the study sites. The sediments are poorly sorted, with negative to very negative skewness at lee and stoss slopes and between‐ripple troughs, which confirms the ‘poured in’ and ‘shadow’ appearance described by previous researchers. The bimodal or trimodal distributions of grains (with modes of ?1·16φ, ?0·5φ and 3·16φ) and the enrichment of coarse particles at the ripple surface (with coarse granule contents ranging between 5·2% and 62·1%) indicate that the underlying layer is the original sediment source and that the granule ripples resist erosional processes. Although the impact of saltating particles and, consequently, the creep and reptation of coarse grains are responsible for granule ripple initiation at a micro‐scale, however, the characteristics of local sediments, wind regimes and topographical obstacles, as well as the feedbacks among bedform and airflow, more strongly affect the development and alignment of granule ripples at a macro‐scale.     

风沙物理学中两个焦点问题研究现状与未来研究思路刍议

风沙物理学经过数十年的发展与完善,可以说基本上自成体系。但由于学科的起步较晚,加之现象的复杂性,目前仍有很多重要的理论问题没能彻底解决,至少还未达成共识,成为学术界长期以来争论的焦点,从而影响了学科的继续发展。对“沙粒起动机制”和“风成沙纹的形成机理”两个焦点问题在进行研究现状剖析的基础上,浅析未来研究思路。提出沙粒起动主要驱动力是驻点升力的观点,以空气动力学理论为基础的沙粒起动机制研究将是未来该领域的发展趋势;关于沙纹的形成,认为沙粒粒径的不均匀性以及所导致的非平衡运动是前提和基础,风沙流运动过程中类似左右沙丘运动的蚀积转换规律是使沙纹能够维持其稳定形态的必要条件,而沙纹有规律、整齐划一的分布与排列可能与背风面气流小尺度的涡流有关。     

应用近景摄影法研究沙纹的移动

近景摄影能够在无干扰的条件下,精确地测定正在发育阶段的风成沙纹,以波动方式整体移动的平均移动速度V_R(cm·min^-1),和相应的沙纹波长L(cm)波高Δh(mm)及其平均值。同时,求得沙纹移动速度V_R与局地风速V_L之间的实验关系式为V_R=158×(V_L-5.5)^0.67,沙纹移动是缓慢的,其数量级变化于10^-1~10¹cm·min^-1之间。沙纹波长与波高与直接测定值相当吻合。