Quaternary tectonic faulting in the Eastern United States

Paleoseismological study of geologic features thought to result from Quaternary tectonic faulting can characterize the frequencies and sizes of large prehistoric and historical earthquakes, thereby improving the accuracy and precision of seismic-hazard assessments. Greater accuracy and precision can reduce the likelihood of both underprotection and unnecessary design and construction costs. Published studies proposed Quaternary tectonic faulting at 31 faults, folds, seismic zones, and fields of earthquake-induced liquefaction phenomena in the Appalachian Mountains and Coastal Plain. Of the 31 features, seven are of known origin. Four of the seven have nontectonic origins and the other three features are liquefaction fields caused by moderate to large historical and Holocene earthquakes in coastal South Carolina, including Charleston; the Central Virginia Seismic Zone; and the Newbury, Massachusetts, area. However, the causal faults of the three liquefaction fields remain unclear. Charleston has the highest hazard because of large Holocene earthquakes in that area, but the hazard is highly uncertain because the earthquakes are uncertainly located.Of the 31 features, the remaining 24 are of uncertain origin. They require additional work before they can be clearly attributed either to Quaternary tectonic faulting or to nontectonic causes. Of these 24, 14 features, most of them faults, have little or no published geologic evidence of Quaternary tectonic faulting that could indicate the likely occurrence of earthquakes larger than those observed historically. Three more features of the 24 were suggested to have had Quaternary tectonic faulting, but paleoseismological and other studies of them found no evidence of large prehistoric earthquakes. The final seven features of uncertain origin require further examination because all seven are in or near urban areas. They are the Moodus Seismic Zone (Hartford, Connecticut), Dobbs Ferry fault zone and Mosholu fault (New York City), Lancaster Seismic Zone and the epicenter of the shallow Cacoosing Valley earthquake (Lancaster and Reading, Pennsylvania), Kingston fault (central New Jersey between New York and Philadelphia), and Everona fault-Mountain Run fault zone (Washington, D.C., and Arlington and Alexandria, Virginia).     

Bedrock structure in Adapazari, Turkey—a possible cause of severe damage by the 1999 Kociaeli earthquake

The 1999 Kocaeli earthquake brought serious damage to downtown of Adapazari. To study why strong motions were generated at the town, a bedrock structure was investigated on the basis of Bouguer gravity anomaly, and SPAC and H/V analyses of microseisms. It was revealed that, the basin consists of three narrow depressions of bedrock with very steep edges, extending in E–W or NE–SW directions along the North Anatolia faults, and the depth to bedrock reaches 1000 m or more. Downtown of Adapazari is located 1–2 km apart from the basin-edge. It is considered that, the specific configuration of bedrock amplifies ground motions at the downtown area by focusing of seismic waves and/or interference between incident S-waves and surface-waves secondarily generated at the basin-edge. Studying 3D bedrock structure is an urgent issue for microzoning an urban area in a sedimentary basin.     

Curvature analysis of triangulated surfaces in structural geology

This paper addresses the problem of characterizing the shape of a geological surface on the basis of its principal curvatures. The surface is assumed to be modeled as a set of adjacent triangles defined by the location of their vertices and a method is proposed for estimating numerically the principal curvatures at the vertices of the triangles using a local C² interpolant. Also shown is how principal curvatures can be useful for studying the deformation of a geological surface (with application to 3D balanced unfolding), and analyzing the folding or faulting of the interface between two adjacent layers.     

Microseismicity and active deformation of Messinia,SW Greece

By deploying a 30 3-component digital seismic array in the Messiniakos gulf and the surrounding region, we recorded for a period of 45 days the microseismic activity. With a minimum of six records per event, we located 1121 earthquakes corresponding to an average of 20 events per day. For the hypocenter location we used a local velocity model adopted to two controlled source seismic experiments. Within the array, traveltime residuals were within ± 0.2 s and the epicentral accuracy in the order of ± 2 km, while the hypocentral one is twice this value. Correlation of the seismicity with the tectonic elements indicated that most of the NW-SE oriented faults are active with strike-slip movement along this orientation and extension perpendicular to it. The neogene basins of Messini, Meligalas and Megalopolis are seismically very active and their eastern flanks are delineated by higher seismic activity than their western ones. This indicates that the basins are asymmetric with master faults defining their eastern-northeastern flanks. This hypothesis is supported by the asymmetric structure mapped at the offshore Messiniakos basin as densely spaced high resolution reflection seismic profiles have revealed. The western margins of the basins are less deformed and the seismic activity is dispersed over several minor NW-SE faults. Since the NW-SE striking faults onshore are truncated by major NE-SW oriented ones, their overall length is shortened, reducing their seismic potential and capacity to store large stresses that could produce events above Ms6.1. Offshore western Messinia, in the Ionian Sea, the size and activity of the faults is significantly larger and prone to develop events of larger magnitudes. Subcrustal seismicity indicates a deepening of the foci to the east-northeast.Part of this work was presented at the CIESM Conference, Monaco, 2001, and in the EGS General Assembly, Nice, 2001.     

L'accident du Toulourenc : une limite tectonique entre la plate-forme provençale et le Bassin vocontien à l'Aptien–Albien (SE France)

The WNW–ESE trending Toulourenc Fault Zone (TFZ) is the western segment of the major Ventoux–Lure Fault Zone, which separates the Provençal platform from the Baronnies Vocontian Basin. The TFZ was subject to polyphased Mid-Cretaceous movements, during the Early Aptian and Middle–Late Albian times. The latter faulting episode generated conglomerates and olistoliths resulting from dismantled faultscarps cutting Barremian–Bedoulian limestones. The deformation is related to compressional wrench faulting (NE–SW sinistral faults; dextral component for the TFZ). It induced the uplift of the northwestern corner of the platform, as indicated by a mid-Cretaceous hiatus (Early Aptian pro parte to Early Albian) narrowly delimited in space. The opening of submeridian grabens within the platform favoured the northward transit of channelised coarse-grained Albian sands originating from a southern area. To cite this article: C. Montenat et al., C. R. Geoscience 336 (2004).     

Image processing of 2D resistivity data for imaging faults

A methodology to locate automatically limits or boundaries between different geological bodies in 2D electrical tomography is proposed, using a crest line extraction process in gradient images. This method is applied on several synthetic models and on field data set acquired on three experimental sites during the European project PALEOSIS where trenches were dug. The results presented in this work are valid for electrical tomographies data collected with a Wenner-alpha array and computed with an l₁ norm (blocky inversion) as optimization method. For the synthetic cases, three geometric contexts are modelled: a vertical and a dipping fault juxtaposing two different geological formations and a step-like structure. A superficial layer can cover each geological structure. In these three situations, the method locates the synthetic faults and layer boundaries, and determines fault displacement but with several limitations. The estimated fault positions correlate exactly with the synthetic ones if a conductive (or no superficial) layer overlies the studied structure. When a resistive layer with a thickness of 6 m covers the model, faults are positioned with a maximum error of 1 m. Moreover, when a resistive and/or a thick top layer is present, the resolution significantly decreases for the fault displacement estimation (error up to 150%). The tests with the synthetic models for surveys using the Wenner-alpha array indicate that the proposed methodology is best suited to vertical and horizontal contacts. Application of the methodology to real data sets shows that a lateral resistivity contrast of 1:5–1:10 leads to exact faults location. A fault contact with a resistivity contrast of 1:0.75 and overlaid by a resistive layer with a thickness of 1 m gives an error location ranging from 1 to 3 m. Moreover, no result is obtained for a contact with very low contrasts (1:0.85) overlaid by a resistive soil. The method shows poor results when vertical gradients are greater than horizontal ones. This kind of image processing technique should be systematically used for improving the objectiveness of tomography interpretation when looking for limits between geological objects.     

Morphological and microtectonic analysis of Quaternary deformation from Puná and Santa Clara Islands, Gulf of Guayaquil, Ecuador (South America)

This paper presents the neotectonic study of Santa Clara and Puná Islands sited in the Gulf of Guayaquil eastern part. Both islands are located on the south-western segment of the fault zone bounding to the east the North Andean Block. Fault motion and morphostructural analysis were carried out from Pleistocene age terrain. A two step deformation characterises the South Puná tectonics. The first step involves the Zambapala Cordillera uplift that post-dates Pleistocene sediments and pre-dates a marine terrace correlated with the M.I.S. 11 or 13 (440–550 ka). The second step is the formation of a pull-apart that shows evidence of 2.9 km dextral offset since the M.I.S. 11 or 13, giving an offset mean rate of 5.3 to 6.6 mm/yr. This rate is higher than the one calculated on the Pallatanga Fault northeast of the study area, in the Western Andean Cordillera, suggesting that deformation is split in different fault segments from the Gulf of Guayaquil to the continent. The Zambapala Cordillera uplift and transpression deformation requires a compressive event that may have been induced by the subduction process during the early Pleistocene.