Laboratory study of soil-CFRP interaction using pull-out test

Soil is a material which is weak in tension; however, different materials such as geotextiles are used to address this inadequacy. In recent years more than one million square metres of geotextiles were used for reinforcing soil. Nevertheless, there are several significant problems associated with geotextiles, such as creep, low modulus of elasticity and susceptibility to aggressive environments. Carbon fibre reinforced polymer (CFRP) was introduced over two decades ago to the field of structural engineering and it can also be used in geotechnical engineering. CFRP has all the benefits associated with geotextiles and it boasts a higher strength, higher modulus, no creep and reliability in aggressive environments. In this investigation, the interface properties of CFRP-sand and fine sand were investigated using the pull-out test. The pull-out test device was designed and assembled using a triaxial loading device and a direct shear device. In the pull-out test, the normal force applied by the triaxial loading and pull-out force is applied by a direct shear device. CFRP samples were prepared in the lab. Precast and cast-in-place samples were tested. The pull-out force and corresponding displacements of each of the materials were recorded and compared.     

基于数字图像分析的土工合成材料加筋砂土拉拔试验研究

由于加筋土界面作用的复杂性,加筋土工程建设中铺设土工格栅时往往采用经验的方法,很大程度上造成了土工格栅的浪费及工程安全隐患,理清不同填料筋土界面作用的影响范围,有助于确定加筋土结构的合理加筋间距。为了揭示不同填料筋土界面作用的影响范围,采用4种不同类型的砂土与格栅在不同法向应力下进行了一系列的拉拔试验,并结合数字图像量测技术,分析了不同类型砂土下界面剪切带厚度、颗粒位移矢量、格栅拉拔阻力峰值及应变等演变规律。研究表明：界面剪切带厚度H随法向应力σ_v与砂土平均粒径d₅₀的增加而增大,通过多变量拟合的方法,得到了H、σ_v与d₅₀三者之间的函数表达式;格栅在拉拔过程中,砂土颗粒位移矢量以土工格栅为界有着显著的差别,格栅上部的颗粒位移矢量明显大于下部颗粒,且在格栅上下一定范围内会形成颗粒位移矢量集中带;拉拔阻力峰值随σ_v及d₅₀的增加而增大;不同类型砂土各区段的格栅应变均表现出由前向后依次递减的趋势。     

筋土界面特性宏细观分析试验仪器研制与应用

为了更全面地分析筋土界面相互作用特性,改制了一台可视加筋土界面特性宏细观分析的试验仪器,可开展不同土工合成材料与填料的直剪和拉拔试验;该仪器改进了试验箱的尺寸,可方便两种试验的对比分析,增加了图像摄录系统,可进行试验过程的细观分析。使用新研制仪器分别进行了土工合成材料（土工格栅和土工布）加筋尾矿砂的直剪和拉拔试验,试验结果表明:两种试验条件下,土工格栅与尾矿的界面参数（似黏聚力和似摩擦角）及似摩擦系数均比土工布与尾矿的界面参数和似摩擦系数大;直剪试验下筋材网孔的有无对筋-尾矿界面参数均有较大影响,拉拔试验下筋材网孔有无对筋-尾矿界面参数似黏聚力的影响较为显著,对似摩擦角的影响较小。随着宏观变量法向应力的增加,细观参数孔隙率减小,平均接触数增加,反映在宏观上的现象就是填料颗粒被压密,筋材需要克服的阻力增大。该试验仪器能够较好地分析筋土界面宏细观特性,获得关键技术指标以用于加筋结构的设计。      

Disturbed state model for sand–geosynthetic interfaces and application to pull-out tests

Successful numerical simulation of geosynthetic-reinforced earth structures depends on selecting proper constitutive models for soils, geosynthetics and soil–geosynthetic interfaces. Many constitutive models are available for modelling soils and geosynthetics. However, constitutive models for soil–geosynthetic interfaces which can capture most of the important characteristics of interface response are not readily available. In this paper, an elasto-plastic constitutive model based on the disturbed state concept (DSC) for geosynthetic–soil interfaces has been presented. The proposed model is capable of capturing most of the important characteristics of interface response, such as dilation, hardening and softening. The behaviour of interfaces under the direct shear test has been predicted by the model. The present model has been implemented in the finite element procedure in association with the thin-layer element. Five pull-out tests with two different geogrids have been simulated numerically using FEM. For the calibration of the constitutive models used in FEM, the standard laboratory tests used are: (1) triaxial tests for the sand, (2) direct shear tests for the interfaces and (3) axial tension tests for the geogrids. The results of the finite element simulations of pull-out tests agree well with the test data. The proposed model can be used for the stress-deformation study of geosynthetic-reinforced embankments through numerical simulation. Copyright © 1999 John Wiley & Sons, Ltd.     

土工格栅加筋膨胀土拉拔试验研究

土工格栅加筋技术对膨胀土地质灾害的防治具有特殊效果,但目前对土工格栅与膨胀土界面特性的研究不足。采用南水北调中线工程新乡段的膨胀性泥灰岩风化土作填料,塑料单向拉伸土工格栅作为加筋体,在叠环式剪切试验机上通过施加不同的竖向荷载对其界面特性进行了拉拔试验研究。研究结果表明,土工格栅在膨胀土中的拔出过程主要经过3个阶段,分别是界面静摩擦力阶段、渐进剪切阶段和整体运动阶段,各阶段受力特性有明显差异;随着法向应力的增大,静摩擦力在界面抗剪强度比值呈对数级增大,从50 kPa时0.20增大至400 kPa时0.57,极限值可达到0.75;对挡土墙、高边坡等加筋设计中应考虑最大静摩擦力所占比重,在格栅的不同竖向高度处所受垂直应力不同,分段设计更加合理。     

滑坡锚杆锚固力时间效应试验研究

为研究陕南千枚岩边坡锚杆锚固效果,通过不同的加载方式进行了锚杆拉拔试验,对锚杆应力变化与位移的对应关系及锚杆应力的长期变化进行了总结。结果认为,采用逐级加载方式予以加载时,潜在滑面处应力增加滞后于锚头处应力值;采用瞬时加载至极限抗拉强度方式予以加载时,孔中滑面处钢筋计应力对外荷载不敏感。采用逐级加载方式予以拉拔后,锚杆锚头及潜在滑面处应力均需要经过约一年时间调整,同步达到稳定状态;采用瞬时加载至极限抗拉强度进行拉拔后,孔口应力调整需要较长时间,远长于潜在滑面处应力调整至稳定值的时间。     

岩石锚杆基础抗拔承载力计算方法探究

岩石锚杆基础作为架空输电线路塔基中的一种特殊基础型式,可以充分发挥原状岩体的力学性能,具有良好的抗拔性能。根据目前岩石锚杆基础原型试验的结果,《架空送电线路基础设计技术规定》中所推荐的单锚基础抗拔承载力计算模型中,理想45?破坏模式与实际不符,按其设计计算值偏差较大,可能导致设计成果不安全。为此,依据极限平衡原理基于围岩强度建立了较为合理的抗拔承载力计算模型,力学推导得出了相关公式,并进行了简化。通过推导公式计算值与实测值、设计值对比验证可知,抗拔承载力极限值位于 ～ 区间内,与推荐公式 的计算值一致性较好,能满足工程应用精度,具有可行性。     

筋土界面参数测试方法合理选择研究

筋土界面相互作用机理和方式随加筋土结构不同以及同一加筋土结构的位置不同而有所区别,相应参数的测试方法也应不同。根据国内外筋土界面参数测试方法的最新研究成果,结合工程实践发展需要和筋土界面相互作用关系特点,建立了筋土界面参数测试方法选择原则,为工程设计和研究工作中合理选择界面参数测试方法提供了科学的参考依据。     

筋土界面参数的拉拔试验过程划分研究

用正交设计表L9（34）安排了测试膨胀土、砂土与土工格栅界面参数的54次拉拔试验,提出了当量拉拔位移的概念。将筋土界面的拉拔试验过程划分成可获取不同位移状态下筋土界面参数的两大部分和三个阶段,据此,可合理获取适用于极限平衡和工作应力状态下的筋土界面参数。