隧道工程地质评价的内容和方法

结合工程隧道实际,首先阐述了隧道工程的基本地质环境和工程地质条件,然后针对隧道工程可能出现的不良地质现象和可采取的工程措施,从大气降水、围岩稳定、围岩压力、洞口稳定、隧道比选等角度探讨隧道工程地质评价的主要方法和一般内容,进行隧道工程地质评价,为隧道施工、支护提供了依据.     

Observations on the ecological importance of salt marshes in the Cumberland Basin,a macrotidal estuary in the Bay of Fundy

The Cumberland Basin, a 118 km² estuary at the head of the Bay of Fundy which has an average tidal range of about 11m, contains large tracts of salt marsh (15% of the area below highest high water). Low marsh (below about 0·9 m above mean high water) is composed almost exclusively of Spartina alterniflora while the vegetation on high marsh is more diverse but dominated by Spartina patens. Because of its higher elevation, high marsh is flooded infrequently for short periods by only extreme high tides. Low marsh is inundated much more frequently by water as much as 4m deep for periods as long as 4 h per tide. Temporal variability in the occurrence of extreme tides influences the flooding frequency of high marsh for any given month and year. Using a modification of Smalley's method, the mean annual net aerial primary production (NAPP) of low and high marsh is estimated to be 272 and 172 g C m^?2, respectively. Vegetation turnover times average 1·0 and 2·0 y for low and high marsh, respectively. Because of abundant tidal energy, much of the low marsh production appears to be exported and distributed widely about the estuary. Since high levels of turbidity suppress phytoplankton production, salt marshes produce approximately half of the carbon fixed photosynthetically in the Cumberland Basin. It is concluded that salt marshes play a major ecological role in the Cumberland Basin.     

含有集约束向量极值问题的最优性条件

在序线性拓扑空间里研究了含有集约束向量极值问题的最优性条件,并建立了充分性和必要性条件.     

八庙—青山金红石矿床化学成分与成矿关系

本矿床是我国金红石矿床重要的成因及工业类型，为具有特定化学成分的岩石在特定变质条件下形成的。本文通过对大量数据的处理，查明了化学成分与成矿的关系：高Ａｌ２Ｏ３、ＭｇＯ、Ｆｅ２Ｏ３＋ＦｅＯ、Ｋ２Ｏ、Ｐ２Ｏ５、Ｈ２Ｏ＋、ＭｎＯ，低ＳｉＯ２、ＣａＯ、Ｎａ２Ｏ、ＣＯ２、Ｓ等，利于钛富集；高ＴｉＯ２、ＭｇＯ、Ｐ２Ｏ５、Ｓ，低ＳｉＯ２、ＣａＯ、Ｋ２Ｏ、Ａｌ２Ｏ３、Ｆｅ２Ｏ３／ＦｅＯ，利于金红石形成；高Ｓｃ、Ｚｒ、Ｎｉ、Ｚｎ及Ｌａ／Ｙｂ，低Ｙ、Ｎｂ、Ｔｈ、Ｃｄ、Ｂａ、Ｂｅ、ΣＲＥＥ，利于金红石纯度提高。对研究矿床成因及寻找新的同类矿床等有重要意义     

VERTICAL PROFII,ES OF CHL-A AND PRIMARY PRODUCTIVITY IN THE MIDDLE CONTINENTAL SHELF AREA AND EDDY AREA OF THE EAST CHINA SEA

Vertical profiles of chl-a and primary productivity in the middle continental shelf area and eddy area of the East China Sea were studied using data from a cruise in the East China Sea in February to March, 1997 and a cruise in July, 1998. The results showed that chl-a vertical distribution closely related to in situ hydrological and nutrient conditions. Chla-a concentration ranged from 0.22 to 0.35 mg/m³ and 0.93–1.09 mg/m³ in the eddy area and in the middle continental shelf area, respectively. In both areas, chl-a concentrations in deep layers were slightly higher than those in shallow layers, but was of the same order of magnitude. In summer, when a thermocline existed in the water column, highest chl-a concentrations appeared at the base of the thermocline layers in both areas. In the eddy area, chl-a concentration maximized at 31.743 mg/m³, and averaged 1.143 mg/m³ below 30 m depth. In the middle continental shelf area, the highest chl-a concentration was 2.120 mg/m³, the average was 1.168 mg/m³. The primary productivity reached 1418.76 mgC/(m²·d) in summer and 1360.69 mgC/(m²·d) in winter. In the eddy area, the primary productivity was 787.50 mgC/(m²·d) in summer and 159.04 mgC/(m²·d) in winter. Vertical carbon sinking rate from the deep layer to the bottom in both areas is also discussed in this paper. Contribution NO. 4183 from the Institute of Oceanology, Chinese Academy of Sciences. Project No. 49636210 supported by NSFC.     

济南市地下水资源现状分析及开发利用建议

本文采用较新的统计资料,对济南市地下水资源的开发利用现状及开采潜力,以行政区划为单元进行了分析论证.针对地下水资源开发利用中存在的环境水文地质问题,提出了开发利用规划和建议.     

The second order characteristic condition for plastic flow

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.     

Fast iterative solution of large undrained soil‐structure interaction problems

In view of rapid developments in iterative solvers, it is timely to re‐examine the merits of using mixed formulation for incompressible problems. This paper presents extensive numerical studies to compare the accuracy of undrained solutions resulting from the standard displacement formulation with a penalty term and the two‐field mixed formulation. The standard displacement and two‐field mixed formulations are solved using both direct and iterative approaches to assess if it is cost‐effective to achieve more accurate solutions. Numerical studies of a simple footing problem show that the mixed formulation is able to solve the incompressible problem ‘exactly’, does not create pressure and stress instabilities, and obviate the need for an ad hoc penalty number. In addition, for large‐scale problems where it is not possible to perform direct solutions entirely within available random access memory, it turns out that the larger system of equations from mixed formulation also can be solved much more efficiently than the smaller system of equations arising from standard formulation by using the symmetric quasi‐minimal residual (SQMR) method with the generalized Jacobi (GJ) preconditioner. Iterative solution by SQMR with GJ preconditioning also is more elegant, faster, and more accurate than the popular Uzawa method. Copyright © 2003 John Wiley & Sons, Ltd.     

软玉子料的形状规律及其应用

通过对软玉子料形状总结,发现子料多呈扁平状,其长宽比较小,磨圆好的子料形状可分为11类。这些特征可用于子料鉴别与特殊材料制作。     

白沙河地下水资源管理模型

针对白沙河地下水含水层的内部结构和本区开采特点以及已出现的环境问题，建立了地下水资源管理模型，确定了优化开采方案。该管理模型针对本区每年２个管理时段的长度及其开采量均不同的特点，导出了新的响应矩阵的公式。管理模型的建立有助于对该区地下水的合理开采。