有关边界层问题中一类奇异积分方程新的存在性结果

对边界层理论新结果中出现的一类奇异积分方程w（t）=∫1 t（1-s）（λ＋λs＋s）/w（s）ds＋（1-t）∫t 0s/w（s）ds,t∈（0,1）进行讨论，并得出了上述方程在λ∈（-1/2,0）上正解存在性的新结果。     

关于Diophantine方程的解

对于正整数a ,设S(a)是Smarandache函数。证明了 :方程S(1·2 ) +S(2·3) +… +S(x(x +1) ) =S(x(x +1) (x +2 ) /3)仅有正整数解x =1。     

甘新蒙北山地区成矿带划分和基本特征对比

在对甘新蒙北山地区成矿地质背景和成矿在时空上的联系性等综合研究分析基础上,运用新理论、新认识,以板块构造单元划分为基础,将本区划分为3个Ⅲ级成矿带、11个Ⅳ级成矿带,并对Ⅲ级成矿带特征进行了阐述,以期为矿产勘查和地质大调查工作部署提供新的思路和依据。进一步就主要矿床(点)、构造单元、矿种、赋矿建造、控矿因素、成矿类型、成矿时代等方面进行了对比,认为各Ⅳ级成矿带在区域上具有相对稳定的展布范围,具有相同的构造环境和成矿条件、类似的矿种和成矿时代,存在一定的相似性、可比性,并且各成矿带具有一定的潜在找矿价值。     

Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

Metamorphism in Archaean greenstone belts: calculated fluid compositions and implications for gold mineralization

An inescapable consequence of the metamorphism of greenstone belt sequences is the release of a large volume of metamorphic fluid of low salinity with chemical characteristics controlled by the mineral assemblages involved in the devolatilization reactions. For mafic and ultramafic sequences, the composition of fluids released at upper greenschist to lower amphibolite facies conditions for the necessary relatively hot geotherm corresponds to those inferred for greenstone gold deposits (X_CO2= 0.2–0.3). This result follows from the calculation of mineral equilibria in the model system CaO–MgO–FeO–Al₂O₃–SiO₂–H₂O–CO₂, using a new, expanded, internally consistent dataset. Greenstone metamorphism cannot have involved much crustal over-thickening, because very shallow levels of greenstone belts are preserved. Such orogeny can be accounted for if compressive deformation of the crust is accompanied by thinning of the mantle lithosphere. In this case, the observed metamorphism, which was contemporaneous with deformation, is of the low-P high-T type. For this type of metamorphism, the metamorphic peak should have occurred earlier at deeper levels in the crust; i.e. the piezothermal array should be of the ‘deeper-earlier’type. However, at shallow crustal levels, the piezothermal array is likely to have been of ‘deeper-later’type, as a consequence of erosion. Thus, while the lower crust reached maximum temperatures, and partially melted to produce the observed granites, mid-crustal levels were releasing fluids prograde into shallow crustal levels that were already retrograde. We propose that these fluids are responsible for the gold mineralization. Thus, the contemporaneity of igneous activity and gold mineralization is a natural consequence of the thermal evolution, and does not mean that the mineralization has to be a consequence of igneous processes. Upward migration of metamorphic fluid, via appropriate structurally controlled pathways, will bring the fluid into contact with mineral assemblages that have equilibrated with a fluid with significantly lower X_CO2. These assemblages are therefore grossly out of equilibrium with the fluid. In the case of infiltrated metabasic rocks, intense carbonation and sulphidation is predicted. If, as seems reasonable, gold is mobilized by the fluid generated by devolatilization, then the combination of processes proposed, most of which are an inevitable consequence of the metamorphism, leads to the formation of greenstone gold deposits predominantly from metamorphic fluids.     

山东省区域地质构造演化探讨

山东省区域地质构造演化分为5个阶段.①陆核形成阶段形成太古宙高级区,地壳分异成稳定的花岗岩穹窿和活动的绿岩带,第一次克拉通化完成.②陆块发生形成阶段地壳向刚性发展,在华北陆核硅铝壳的基础上先后有3次张开、闭合裂谷作用,第二次克拉通化完成.这一阶段演化在鲁西地区主要表现为挤压作用,形成大量造山花岗岩;鲁东地区则以拉张作用为主,形成海槽,产生沉积.③秦昆洋形成演化阶段四堡期沿鲁东南部地壳拉张,在华北板块与扬子板块间形成秦昆洋.晋宁期秦昆洋关闭,华北板块与扬子板块对接碰撞,沿胶南造山带产生大量同碰撞花岗岩,同时产生超高压变质作用及形成丰富多彩的碰撞构造.晋宁运动最终形成统一的原始中国古陆,第三次克拉通化完成.④陆块发展阶段鲁西地区地壳频繁升降,形成广泛的海相及海陆交互相沉积;鲁东地区则以造山抬升为主,地层沉积较少.⑤滨太平洋发展阶段该阶段的主要特征是断块构造发育,形成盆岭构造格局,产生大陆边缘花岗岩,构造体系由古亚洲构造域转向滨太平洋构造域.     

The Fault Block''s Framework in Boli Basin and its Control Over the Deposition

Boli basin, between Yishu fracture belt and Dunmi fracture belt, is the biggest Mesozoic coal basin in the east of Heilongjiang Province. Now it is a fault - fold remnant basin. The basin' s shape is generally consistent with the whole distribution of the cover folds, an arc protruding southwards. The basement of the basin can be divided into three fault blocks or structural units. The formation and evoluation of the basin in Mesozoic was determined by the basement fault blocks' displacement features rusulted from by the movement of the edge faults and the main basement faults.     

Reliability assessment of serviceability performance of braced retaining walls using a neural network approach

In urban environments, one major concern with deep excavations in soft clay is the potentially large ground deformations in and around the excavation. Excessive movements can damage adjacent buildings and utilities. There are many uncertainties associated with the calculation of the ultimate or serviceability performance of a braced excavation system. These include the variabilities of the loadings, geotechnical soil properties, and engineering and geometrical properties of the wall. A risk‐based approach to serviceability performance failure is necessary to incorporate systematically the uncertainties associated with the various design parameters. This paper demonstrates the use of an integrated neural network–reliability method to assess the risk of serviceability failure through the calculation of the reliability index. By first performing a series of parametric studies using the finite element method and then approximating the non‐linear limit state surface (the boundary separating the safe and ‘failure’ domains) through a neural network model, the reliability index can be determined with the aid of a spreadsheet. Two illustrative examples are presented to show how the serviceability performance for braced excavation problems can be assessed using the reliability index. Copyright © 2005 John Wiley & Sons, Ltd.     

Quaternary fault segmentation and interaction in the epicentral area of the 1561 earthquake (Mw = 6.4), Vallo di Diano, southern Apennines, Italy

The main structural characteristics of the Caggiano and Polla faults, exposed in the epicentral area of the 1561 earthquake (Mw = 6.4), southern Italy, have been investigated in detail to assess their spatial and temporal properties, and to evaluate their seismogenic potential. These right stepping normal faults show an overlap of about 7 km and an across strike separation of about 4 km. The geometric relationships between the Caggiano and Polla faults, but also the displacement distribution along each fault, demonstrate that they have been strongly interacting throughout the Pleistocene. Nevertheless, geological evidence of Holocene tectonic activity was mainly recognized along the Caggiano Fault (faulted late glacial deposits) and in the southernmost part of the Polla Fault (faulted deposits of probably Late Pleistocene age). This suggests that the Caggiano Fault can be considered as the most tectonically active fault in the Vallo di Diano Fault System. By calculating Coulomb stress changes, we have constrained modes of mechanical interactions between the two faults in a scenario compatible with the 1561 earthquake. This approach allows us to argue that both the Caggiano and the Polla Faults are probably linked at depth, and part of the same seismogenic structure which may be potentially responsible for composite ruptures with magnitude ≥ 6.5.     

Influence of Structural Non-Stationarity of Surface Roughness on Morphological Characterization and Mechanical Deformation of Rock Joints

Summary Structural non-stationarity of surface roughness affects accurate morphological characterization as well as mechanical behaviour of rock joints at the laboratory scale using samples with a size below the stationarity threshold. In this paper, the effect of structural non-stationarity of surface roughness is investigated by studying the scale dependence of surface roughness and mechanical behaviour of rock joints. The results show that the structural non-stationarity mainly affects the accurate characterization of the surface roughness of the fracture samples. It also controls the amount and location of the contact areas during shear tests, which in turn affects the mechanical properties and asperity degradation of the samples. It is concluded that for accurate determination of the morphological and mechanical properties of rock joints at laboratory and field scales, samples with size equal to or larger than the stationarity threshold are required. Author’s address: Nader Fardin, Rock Mechanics Group, Department of Mining Engineering, Faculty of Engineering, University of Tehran, P.O. Box: 11365/4563, Tehran, Iran