An explicit representation of steady state response of a beam on an elastic foundation to moving harmonic line loads

A closed‐form deflection response of a beam rest is presented in this paper using the integral transform method. The theory of linear partial differential equations is used to represent the deflection of beam subjected to a moving harmonic line load in integration form. The solution is finally carried out using the inverse Fourier transform. To evaluate the integration analytically, poles of the integrand are identified with the help of algebraic equation theory. Residue theorem is then utilized to represent the integration as a contour integral in the complex plane. Closed‐form deflections and numerical results are provided for different combinations of load frequency and velocity. Copyright © 2002 John Wiley & Sons, Ltd.     

Plane of elastic non-resisting tension material under foundation structures

In the frame of 2D-static problems one approaches the problem of elastic-NRT (not-resisting tension) semi-plane loaded on its limit line. This problem is intended to model the stress situation induced in the soil by a foundation structure. The solution, in terms of activated stress field, is searched for in the class of stress fields satisfying equilibrium and admissibility conditions, by applying an energy approach. Copyright © 2004 John Wiley & Sons, Ltd.     

山区公路软基病害研究

随着高等级公路建设规模的扩大，山区公路所面临的路基病害特别是软土路基病害问题也逐渐增多。结合对陕南勉(县)一宁(强)高速公路工程实例分析，对山区软土成因及其特性进行了初步分析，认为山区软土属以坡洪积、湖积和冲积为主的软土，也有少量是由坡残积物堆积而形成。山区软土的特殊性表现在成分的复杂性、分布的不均匀性、隐蔽性和物理力学性质的特殊性。根据其特性以及中国山区公路软基普遍存在的病害问题，总结了山区公路软基的主要病害类型为剪切拉裂破坏、浸水沉陷破坏、剥蚀坍塌破坏、推挤滑动破坏。还提出了相应的软基处理方法及建议。     

紫阳滑坡治理工程实例分析

本文介绍紫阳骨坡治理工程中有关抗滑桩的设计与施工。文中详细地论述了设计中设计人员应根据工程的具体情况去灵活处理的一些技术问题，如确定有关参数的选择原则，计算上的条件简化和一些具体技术细节的处理方法等．     

用素土桩挤密法处理陇东湿陷性黄土地基

素土桩挤密地基由桩间挤密土和回填素土夯实的桩体组成，它是一种人工“复合地基”。其作用是通过素土桩挤密法提高地基土的密实度，从而对湿陷性黄土达到消除浅部或深部的部分或全部湿陷性的作用，并改善地基承载能力，减少地基变形。本文通过现场单桩、群桩单元体轻便触探、小环刀深层取样、开剖取样等方法对场地地基土挤密前、后干重度和压实系数进行了对比分析，判定用素土桩挤密法处理陇东湿陷性黄土地基的可行性。     

A geological and geotechnical investigation of the settlement area of Zümrüt Building (Konya, Turkey) which caused 92 fatalities due to its collapse

This study examines the local geological conditions and soil structure as possible causes of the collapse of the Zümrüt Building 2 February 2004. This catastrophe resulted in 92 fatalities and 35 injuries. This study also examines other views which claim weak soil structure, elastic and consolidation settlement of soil and excessive groundwater extraction as well as subsidence resulting from the underground silt erosion as possible factors. Zümrüt Building was constructed on normally consolidated, low plasticity clay. The underground water table was 30 m in depth. The internal friction angle of soil was 8°–30°, its cohesion was between 34 and 127 kN/m² and standard penetration test numbers varied between 11 and 50. The underground water level beneath Zümrüt Building had risen 4.5 m since its construction. Therefore the claim that subsidence resulting from the decrease of underground water level contributed to the collapse is incorrect. Secondly the settlement, resulting from the filling up of the pores created by the silt receding with the underground water, was 4.4 mm in total, and attributing this as the primary cause of the collapse is also incorrect. Soil properties, in situ and laboratory test results showed that the existing and/or expected settlement and the differential ground settlement in the Zümrüt building vicinity had the potential to cause structural damage. The tensile stresses caused by differential settlements recorded here are thought to be an indicator, but not the main cause contributing to the collapse of the building. The Zümrüt Building collapse was due to several compounding mistakes during the construction phase. These were geotechnical and other project faults and the use of low quality construction materials. The resulting catastrophe caused 92 fatalities, 35 injuries and a material loss of approximately US$7 million.     

Design of shallow foundations under tensile loading for transmission line towers: An overview

Tensioned foundations are common in civil engineering applications such as transmission towers, harbors, offshore structures, basement slabs under pressure, industrial equipment, etc. Procedures for the design of tensioned foundations are discussed in this paper, including specific recommendations for more common transmission tower foundations. Starting from a distinction between shallow and deep modes of failure, the paper presents the most common failure mechanisms for shallow failure in tension, including procedures for calculation of foundation tensile capacity under vertical and inclined loading. Emphasis is given to the influence of the strength of the compacted backfill compared to the strength of the natural soil, including presentation of results of full-scale loading tests.     

基于群桩基础沉降估算确定压缩层厚度的探讨

在现行规范中,由于桩基沉降估算模式的不同,压缩层厚度的确定方法也不完全相同。对这些方法进行归纳、总结,并通过具体的工程实例,对由不同估算模式确定的压缩层厚度及沉降估算结果进行探讨与分析,认为对于工程场地地质资料掌握较为翔实的情况下,压缩层厚度可采用变形比法确定,否则,宜根据应力比法确定。     

广州地区深基坑支护形式研究

介绍了广州地区基坑支护近年来的主要类型及其适用范围,并在分析选型各影响因素的基础上,总结出设计选型的要点。     

基于Poulos弹性理论的被动桩改进算法

传统的Poulos弹性理论仅适合于均质土中土体侧向位移时桩的性状分析,无法考虑土的层状特性。通过引入层状地基中作用一水平集中力的广义Mindlin解和地面作用有竖向荷载时的应力和位移通解,对Poulos方法进行了改进,使之扩展到多层土中,还用于研究堆载条件下的被动桩变形和受力响应。算例分析表明,改进弹性理论要比Poulos方法更为严密、合理,提高了计算精度,应用范围也更广。