STUDY ON GIS FOR YIELD ESTIMATION BY REMOTE SENSING IN JILIN MAIZE BELT

ＳＴＵＤＹ　ＯＮ　ＧＩＳ　ＦＯＲ　ＹＩＥＬＤ　ＥＳＴＩＭＡＴＩＯＮ　ＢＹ　ＲＥＭＯＴＥ　ＳＥＮＳＩＮＧ　ＩＮ　ＪＩＬＩＮ　ＭＡＩＺＥ　ＢＥＬＴＳＴＵＤＹＯＮＧＩＳＦＯＲＹＩＥＬＤＥＳＴＩＭＡＴＩＯＮＢＹＲＥＭＯＴＥＳＥＮＳＩＮＧＩＮＪＩＬＩＮＭＡＩＺ...     

智能照明系统在现代建筑照明中的应用研究

在对传统照明系统和智能照明系统进行对比分析的基础上,剖析了智能照明系统的控制策略,并结合实际的工程应用,着重讨论了基于ABB I-Bus产品的智能照明控制系统的实现,结果表明该系统具有高效、便捷、节约能源等优点.同时,还对系统与建筑物楼宇自控系统问的系统集成方式进行了研究.     

Fast iterative solution of large undrained soil‐structure interaction problems

In view of rapid developments in iterative solvers, it is timely to re‐examine the merits of using mixed formulation for incompressible problems. This paper presents extensive numerical studies to compare the accuracy of undrained solutions resulting from the standard displacement formulation with a penalty term and the two‐field mixed formulation. The standard displacement and two‐field mixed formulations are solved using both direct and iterative approaches to assess if it is cost‐effective to achieve more accurate solutions. Numerical studies of a simple footing problem show that the mixed formulation is able to solve the incompressible problem ‘exactly’, does not create pressure and stress instabilities, and obviate the need for an ad hoc penalty number. In addition, for large‐scale problems where it is not possible to perform direct solutions entirely within available random access memory, it turns out that the larger system of equations from mixed formulation also can be solved much more efficiently than the smaller system of equations arising from standard formulation by using the symmetric quasi‐minimal residual (SQMR) method with the generalized Jacobi (GJ) preconditioner. Iterative solution by SQMR with GJ preconditioning also is more elegant, faster, and more accurate than the popular Uzawa method. Copyright © 2003 John Wiley & Sons, Ltd.     

Shear strength characterization of municipal solid waste at the Suzhou landfill, China

The current practice of slope stability analysis for a municipal solid waste (MSW) landfill usually overlooks the dependence of waste properties on the fill age or embedment depth. Changes in shear strength of MSW as a function of fill age were investigated by performing field and laboratory studies on the Suzhou landfill in China. The field study included sampling from five boreholes advanced to the bottom of the landfill, cone penetration tests and monitoring of pore fluid pressures. Twenty-six borehole samples representative of different fill ages (0 to 13 years) were used to perform drained triaxial compression tests. The field and laboratory study showed that the waste body in the landfill can be sub-divided into several strata corresponding to different ranges of fill age. Each of the waste strata has individual composition and shear strength characteristics. The triaxial test results showed that the MSW samples exhibited a strain-hardening and contractive behavior. As the fill age of the waste increased from 1.7 years to 11 years, the cohesion mobilized at a strain level of 10% was found to decrease from 23.3 kPa to 0 kPa, and the mobilized friction angle at the same strain level increasing from 9.9° to 26°. For a confinement stress level greater than 50 kPa, the shear strength of the recently-placed MSW seemed to be lower than that of the older MSW. This behavior was consistent with the cone penetration test results. The field measurement of pore pressures revealed a perched leachate mound above an intermediate cover of soils and a substantial leachate mound near the bottom of the landfill. The measurements of shear strength properties and pore pressures were utilized to assess the slope stability of the Suzhou landfill.     

引水工程秦巴段隧洞地应力模拟及工程地质问题

利用Ansys有限元软件对三峡引水工程秦巴段线路不同深度、不同截面形态隧洞围岩的应力重分布情况进行模拟计算,得到圆形隧洞、城门形隧洞和马蹄形隧洞围岩的应力数值和等值线图.利用库仑一纳维尔强度准则,对花岗岩区及灰岩区隧洞围岩的剪切破坏进行分析;利用三种岩爆应力判别指标,对岩爆进行初步预测;进而对不同深度、不同截面形态的隧洞围岩的稳定性进行分析;最后对引水工程隧洞设计中截面形态的选择给出了初步建议.     

全数字十二相稳压稳流微机控制系统

提出用于十二相可控整流器的８０９８单片机控制系统的电路原理和软件策略。包括自适应控制算法和触发相序计算在内的多种操作全部用软件实现．与通常的方法相比，此系统的成本更低，动态性能和静态性能更好。     

筒型基础沉贯阻力估算方法

系统地总结国外有代表性工程实践对筒型基础沉贯阻力的研究 ,并将各种方法综合起来 ,提出了加权综合估算法 ,供今后的研究和工程实践参考     

某船坞南翼墙基岩水下控制爆破技术

本文介绍的基岩水下爆破属临近重要建筑物的水下控制爆破。当岩石裂隙发育，且岩面有较厚的石碴覆盖层，其技术难度大，采取的诸如搭钢平台钻孔。塑料套管护孔，以及孔间、排间塑料导爆管雷管接力式微差起爆网路等措施，都是成功之经验，值得今后类似工程推广应用。     

海上平台桶形基础模型压力压贯与负压沉贯试验研究

介绍了海上平台桶形基础模型（模型桶）压力压贯和负压沉贯的试验概况,对比分析了两者贯入力的巨大差异和产生的原因,给出了模型桶压力压贯中贯入深度与压力的关系,负压没贯负压与贯入深度,抽吸泵流量,基土渗流量,桶内土塞隆起之间的关系,试验结果表明,负压沉贯可以大大降低以砂质粉土为基土的土抗力,为在胜利油田类似基土海域海上平台应用桶形基础提供了试验依据,为海上现场导管架桶形基础平台的安装就位施工和控制提供了