Application of Microbial BOD Sensors in Marine Monitoring

A strain of yeast, which can endure high osmotic pressure, is employed for the sensitive material of the microbial BOD sensor. Two immobilization methods are used, I.e. Calcium alginate gel be ads and PV A gel beads. The results show that the PVA gel beads is better. The influences of osmosis and heavy metal ions on the yeast entrapped in the PVA gel beads are also studied in the experiment.     

Damage Survey of Water Supply Systems and Fragility Curve of PVC Water Pipelines in the Chi–Chi Taiwan Earthquake

Substantial damage to water supply systems, including water delivery pipelines, water treatment plants, reservoirs, and water storage tanks, was reported after the 1999 Chi–Chi Taiwan Earthquake. This paper first summarizes the damage survey and then presents the results of seismic fragility analysis for underground pipelines. Construction blueprints of the water delivery pipelines and repair work orders of 11 townships and cities in the disastrous area were digitized into a Geographical Information System (GIS) for analysis and assessment. With the aid of the GIS system, we found that PVC pipes made up 86% of water delivery pipelines while steel, cast iron, ductile iron, PE and others took the rest. Therefore, this paper focuses on the fragility analysis of PVC pipes. Three different methods were applied to derive the fragility relations between the PVC water pipes having nominal diameters (approximately inner diameters) greater than or equal to 65 mm and earthquake intensity parameters such as peak ground acceleration and peak ground velocity. The results were then examined with those of other countries. The discrepancy between our results and the empirical equation used by HAZUS, an earthquake loss estimation software developed by the Federal Emergency Management Agency was not significant.     

洛阳市水资源可利用量研究

以洛阳市为对象，对区域水资源的可利用量进行了研究。区域水资源量包括地表水实际可利用量和地下水实际可利用量。将地表径流中基流部分按比例划出，与河道汛期弃水量加在一起作为河道的生态需水量，从地表水资源量中扣除生态需水量后可得地表水的实际可利用量。将难以利用的地下水量从地下水资源量中扣除后可得地下水实际可利用量。     

Optimal distribution of linear control intensity over the frequency range

In this paper, a control strategy for structural systems is proposed and developed in the frequency domain. The algorithm is substantially based on a linear derivative feedback and a convolution of the control parameter, whose distribution in the frequency field is chosen in such a manner as to comply with the requirements of an ad hoc formulated constrained optimum problem, with the response data monitored until the instant of control action application. Some numerical testing is carried out by referring to given recorded accelerograms, showing a good performance of the proposed approach. Copyright © 2002 John Wiley & Sons, Ltd.     

静力弹塑性分析(Pushover Analysis)的基本原理和计算实例

阐述了美国两本手册FEMA273／274和ATC-40中关于静力弹塑性分析的基本原理和方法，给出了利用ETABS程序进行适合我国地震烈度分析的计算步骤，并用一框剪结构示例予以说明，表明Pushover方法是目前对结构进行在罕遇地震作用下弹塑性分析的有效方法。     

某滑坡软弱夹层抗剪强度取值方法的研究

文章主要针对软弱夹层抗剪强度取值所存在的争议，通过对贵州新街子滑坡的软弱夹层分别选择比例极限、屈服极限及峰值作为剪应力值，采用最小二乘法获得比例抗剪强度、屈服抗剪强度和峰值抗剪强度。以参数选取中应用较为成熟的反分析方法推求力学性质参数c、φ值作为判据对以上3种参数进行比较。计算结果表明：本滑坡软弱夹层中由于含泥量较大，而且粘塑性较强，屈服抗剪强度和反分析得到的抗剪强度偏差最小，比例抗剪强度偏差最大，峰值抗剪强度居中。并以此3种抗剪强度进行天然状态下滑坡稳定性验算，结果表明选用比例极限抗剪强度与当前滑坡的地质现象不符，选用峰值极限抗剪强度安全储备较低，而选取屈服极限抗剪强度最为合理。用此参数进行设计，滑坡已经得到了良好的治理。在取值研究中认为采用试验与反分析相结合的方法确定滑坡稳定性计算参数是比较合理的。以上结论为滑坡中软弱夹层抗剪强度取值的选择提供了重要的依据。     

包头山区流域面雨量的实现及最大洪峰流量的估计

利用T213数值预报产品建立包头市短期降雨预报方程,通过地理信息系统,在Citystar4.0版本软件的支持下,实现大青山区降水随高度的分布模式,计算出主要山区沟河的流域面雨量和降水总量,估计洪峰流量。在GIS(地理信息系统)环境下,研究山区面雨量的预报,通过建立包头市大青山区山体高度降雨量分布的经验公式,得到实现山区沟河流域面的面雨量,最终得到各个沟河流域的最大洪峰流量的估计。     

基岩倾角对盆地地震响应的影响分析

为了研究盆地基岩倾角对盆地地表动力反应的影响,选取了一个跨度2 km,深度500 m的二维成层盆地为研究对象进行有限元动力反应分析。以持时0.25 s的狄拉克脉冲作为输入地震动,探讨了P波和SV波垂直入射时,盆地基岩倾角从10°\,20°\,30°\,40°依次增加的情况下盆地地震反应。结果表明:入射波在倾斜基岩处发生波型转化,同时产生面波,在盆地中心区域发生汇聚;随着基岩倾角的增加地表中心处的卓越频率有减小的趋势。     

水库群供调水系统实时调度研究

以大连市复杂水库群供、调水系统为背景,在对系统特性分析的基础上,提出了系统实时调度框架及二层耦合结构模式,设计了以"总量控制、耦合嵌套、多维决策、滚动修正"为核心的实时调度流程。在径流预报方面,提出了基于超越概率的水库群供、调水系统长期入库径流预报方法,结合中期GFS(Global Forecasting System)数值预报技术对不同时段入库径流进行滚动预报。在调度模型方面,采用基于动态规划的建模求解新方法和常规调度方法,为调度决策提供参考。实例研究表明,建立的实时调度系统实现了滚动预报和滚动调度,具备了实时性;实现了宏观总控与局部调整相结合的调度目标,具备了调度决策不同时间尺度耦合嵌套特性,证明了系统的适用性。研究成果对于同类系统实时调度具有重要参考价值。     

Assessment of point and nonpoint sources pollution in Songhua River Basin,Northeast China by using revised water quality model

Individual participation of pollutants in the pollution load should be estimated even if roughly for the appropriate environmental management of a river basin. It is difficult to identify the sources and to quantify the load, especially in modeling nonpoint source. In this study a revised model was established by integrating point and nonpoint sources into one-dimensional Streeter-Phelps (S-P) model on the basis of real-time hydrologic data and surface water quality monitoring data in the Jilin Reach of the Songhua River Basin. Chemical oxygen demand (COD) and ammonia nitrogen (NH_3-N) loads were estimated. Results showed that COD loads of point source and nonpoint source were 134 958 t/yr and 86 209 t/yr, accounting for 61.02% and 38.98% of total loads, respectively. NH_3-N loads of point source and nonpoint source were 16 739 t/yr and 14 272 t/yr, accounting for 53.98% and 46.02%, respectively. Point source pollution was stronger than nonpoint source pollution in the study area at present. The water quality of upstream was better than that of downstream of the rivers and cities. It is indispensable to treat industrial wastewater and municipal sewage out of point sources, to adopt the best management practices to control diffuse pollutants from agricultural land and urban surface runoff in improving water quality of the Songhua River Basin. The revised S-P model can be successfully used to identify pollution source and quantify point source and nonpoint source loads by calibrating and validating.