The status of geological dredging techniques

Scientific sea-floor dredging is currently used in marine geology primarily by the hard-rock community interested in the recovery of basement rock samples from the unsedimented deep ocean floor. The technique has generally been eclipsed by ocean drilling for recovery of sedimentary rocks, because of perceived uncertainties in the location of sampling and in the representativeness of recovered material. This contribution reviews dredging equipment currently in use by marine geological institutions and refers to pinger attachments that allow precise information on the behaviour of the dredge to be telemetered back to the ship. We argue that improvements in ship navigation and transponder navigation at the seafloor, when used in conjunction with surface and/or deeply towed sidescan and swathemapping surveys, now allow for considerably less uncertainty on the location of dredge sampling. Refined sorting criteria for dredge hauls are now also available. Recent comparisons of regional sample recovery by ocean drilling and by dredge sampling indicate that the dredge hauls can usefully supplement the drilling data in the construction of sedimentary and tectonic histories of seafloor areas.     

Structural modeling and testing of a concrete canoe

A finite element model is set up and experimental tests are performed to help understand the behavior of a concrete canoe and subsequently optimize its design. First, the performance criteria that must be satisfied to participate at the annual ASCE/Master Builders competition are described. Then, the finite element model and the different loading cases that were studied are presented. Results from these loading cases are discussed and used to optimize the material properties as well as the thickness of the hull and the dimensions of the gunwale and reinforcing ribs. Static and dynamic experimental tests were also conducted to validate the results of the finite element analyses. The results indicate that the main stresses and strains are caused by the static load cases. The additional stresses caused during races are small.     

An evaluation of systems for the integrated assessment of capture fisheries

Integrated fishery assessments are intended to take an integrated and wholistic view of fisheries management, to provide comprehensive systems-based evaluations of the sustainability of individual fisheries and their products. Using guidance derived from decision theory and management science, we develop 18 criteria to evaluate the likely effectiveness of nine integrated fishery assessment systems. The assessment systems do not consistently consider four key criteria: the socio-economic impacts of fisheries, the provision of food security, the local relevance of the assessment to the fishery under assessment, and the independent peer review of assessment outcomes. Other important areas of weakness include the lack of appropriate consultation processes relating to both the design of the assessment system and the outcomes of fishery assessments, and limitations in the quality of data and information used in assessments. Improvements will be needed in these areas across all the systems we evaluated if fishers, consumers, managers and other stakeholders are to be provided with consistently reliable assessment outcomes, and an assurance of the sustainability of capture fisheries.     

Examination of empirical formulas for wave shoaling and breaking on steep slopes

Estimation of the wave height transformation of shoaling and breaking is essential for the nearshore hydrodynamics and the design of coastal structures. Many empirical formulas have been well recognized to the wave height transformation, but most of them were only applicable for gentle slopes. This paper reports the experimental results of wave shoaling and breaking over the steep slopes to examine the applicability of the previous empirical formulas. Two steep bottom slopes of 1/3 and 1/5, and one gentle slope of 1/10 were conducted in the present experiments. Experimental results show that the shoaling distance of steep slopes become short and the surface waves may be partially reflected from the steep bottom, thus the estimation of wave shoaling using the well-known previous formula did not conform completely to the experimental results. The previous empirical formulas for the wave breaking criteria were also examined, and the modified equations to the steep beaches were proposed in this work. A numerical model was finally adopted to calculate the wave height transformation in the surf zone by introducing the modified breaking index.     

一个新的沉积变质型钛矿床的成矿模式及找矿方法

内蒙古羊蹄子山沉积变质型钛矿床是一个新的钛矿床类型。通过对地质、地球物理前提条件的研究和找矿方法试验,认为高精度磁法是找沉积变质型钛矿床的基本方法,重力为有效的找矿方法。在矿区北带磨石山以金红石为主的富钛矿体上有600 μGal的重力异常,无磁异常;南带的羊蹄子山钛铁矿体上重力异常为500 μGal,有60 nT的弱磁异常。     

商城县汤家坪钼矿地球化学特征及找矿远景

矿区地质、地球化学特征研究入手,总结了综合找矿标志,指出了进一步找矿方向。研究表明该矿床成矿组分单一,异常元素组合主要为Mo、Bi、Ag,次为W、Sn、Zn、Cu、Pb,仅有钼能形成较大规模的异常;矿床元素水平分带序列为(Mo-Bi-Ag)-(W-Sn)-(Pb-Zn-Cu),垂向分带序列为(Mo-Ag-Pb-Zn)-Cu-(Bi-W-Sn),并以w(Mo)/[w(Bi)×100]≥65,[w(Pb)×w(Zn)/w(W)×w(Sn)]≥25为判别标志,来预测深部盲矿体的存在。     

主砂体及其构造改造样式的盆地产铀远景评价判据

本文在介绍并分析美国和前苏联总结的砂岩型铀矿区域评价判据的基础上, 引入当今碎屑岩沉积学和盆地地球动力学方面的若干新进展, 提出以主砂体及其随后经历的构造改造样式相结合的盆地产铀远景评价判据和以分析区域构造活动史和原型盆地演化相结合的盆地产铀远景评价模式。最后以潮水盆地为例, 具体分析了盆地各个时代盖层容存后生铀矿化的可能性, 指出盆地中的主要找矿目标层位和远景成矿地段。     

从江县翁浪金矿床容矿岩石与围岩蚀变及其找矿标志

文章简单介绍了构造蚀变岩型金矿翁浪金矿床的容矿岩石和围岩蚀变特征，指出该类矿床的找矿标志，对进一步寻找此类矿床有一定的意义。     

Methodology for construction, calibration and validation of a national hydrological model for Denmark

An integrated groundwater/surface water hydrological model with a 1 km² grid has been constructed for Denmark covering 43,000 km². The model is composed of a relatively simple root zone component for estimating the net precipitation, a comprehensive three-dimensional groundwater component for estimating recharge to and hydraulic heads in different geological layers, and a river component for streamflow routing and calculating stream–aquifer interaction. The model was constructed on the basis of the MIKE SHE code and by utilising comprehensive national databases on geology, soil, topography, river systems, climate and hydrology. The present paper describes the modelling process for the 7330 km² island of Sjælland with emphasis on the problems experienced in combining the classical paradigms of groundwater modelling, such as inverse modelling of steady-state conditions, and catchment modelling, focussing on dynamic conditions and discharge simulation. Three model versions with different assumptions on input data and parameter values were required until the performance of the final, according to pre-defined accuracy criteria, model was evaluated as being satisfactory. The paper highlights the methodological issues related to establishment of performance criteria, parameterisation and assessment of parameter values from field data, calibration and validation test schemes. Most of the parameter values were assessed directly from field data, while about 10 ‘free’ parameters were subject to calibration using a combination of inverse steady-state groundwater modelling and manual trial-and-error dynamic groundwater/surface water modelling. Emphasising the importance of tests against independent data, the validation schemes included combinations of split-sample tests (another period) and proxy-basin tests (another area).     

Copper-Polymetal Metallogenic Series and Prospecting Perspective of Eastern Section of Gangdise

Geological, geophysical, geochemical and remote sensing comprehensive studies show that big ore-prospecting potentiality is contained in the eastern section of the Gangdise Mountains, Tibet.There are various mineralization types with dominant types of porphyry and exhalation. According to their relations with tectonic evolution, they are divided into four kinds of metallogenic series as follows:magnmtic type (Cr, Pt, Cu, Ni) and exhalation type (Cu, Pb, Zn, Ag) ore deposit series related to Neo-Tethys oceanic crust subduction action (125-96 Ma); epithermai type (Au, Ag, Pb, Zn, Sb), altered fractured rock type (Cu, Mo) and skarn rock type (Cu) ore deposit series related to arc-continental collision; porphyry type (Cu, Mo), cryptoexplosion breccia type (Cu, Au, Pb, Zn), shear zone type (Au, Ag, Sb) and skarn rock type (Cu, Fe) ore deposit series with relation to post-orogenic extensional strike-slip. From subductive complex to the north, zoning appears to be crystallization differentiation type (segregation type)-shear zone type (altered rock type)-skarn rock type, epithermai type-porphyry type-porphyry type and exhalation type-exhalation type-hydrothermai filling-replacement type.The ore deposit is characterized by multi-places from the same source, parity and multi-stage, hypabyssal rock from the deep source and poly genetic compound as a whole.