Damage identification method using harmonic excitation force considering both modelling and measurement errors

A method of structural damage identification using harmonic excitation force is presented. It considers the effects of both measurement and modelling errors in the baseline finite element model. Damage that accompanies changes in structural parameters can be estimated for a damaged structure from the change between measured vibration responses and ones calculated from the analytical model of the intact structure. In practice, modelling errors exist in the analytical model due to material and geometric uncertainties and a reduction in the degrees of freedom as well as measurement errors, making identification difficult. To surmount these problems, bootstrap hypothesis testing, which enables statistical judgment without information about these errors, was introduced. The method was validated by numerical simulation using a three‐dimensional frame structure and real vibration data for a three‐storey steel frame structure. Copyright © 2005 John Wiley & Sons, Ltd.     

准噶尔盆地腹部Z2井三叠系地层及沉积特征

对准噶尔Z2井三叠系各组的岩性、电性特征进行了详细解释与描述,对各组的孢粉、大孢子组合特征展开了讨论,提出了该井三叠系地层划分为自碱滩组、克拉玛依组和百口泉组,且将其与邻区钻遇的三叠系进行了横向及纵向对比。在此基础上,通过对测、录井资料的精细解释,并借鉴前人的区域沉积相研究成果,探讨了该区三叠纪沉积环境。     

The optimum control of thruster system for dynamically positioned vessels

An offshore vessel with a dynamic positioning system (DP system) needs fast response to produce thrust to counteract the environmental forces acting on it for the purpose of maintaining its position and heading as close as possible to the working position. Therefore, quick and effective modulation of the thrust is the problem to determine the thrust and the rotation angle of the thruster devices of the ship. This paper presents an effective optimum control for a thruster system, using the sequential quadratic method to achieve economical and effective modulation of the thrust and the direction of the thruster. An optimum control study of a 2280 tons DP coring vessel with five rotary azimuth thruster marine positioning is studied in detail, which can quickly and exactly estimate the thrusts and angles of direction of all the thrusters. The results can provide a valuable thruster system for a dynamically positioned vessel.     

Fuzzy Optimum Model of Semi-Structural Decision for Lectotype Optimization of Offshore Platforms

In the process of concept design of offshore platforms, it is necessary to select the best from feasible alternatives through comparison and filter. The criterion set, used to evaluate and select the satisfying alternative, consists of many qualitative and quantitative factors. Therefore, the selection is a problem of multicriteria and semi- structural decision- making. Different from traditional methods in semi- structural decision- making, a new framework and methodology is presented in this paper for evaluation of offshore platform alternatives. First, the criterion set is established for the evaluation of alternatives. Next, the approach is studied to construct the relative membership degree matrix, in which both qualitative and quantitative factors are consistent with the uniform calculating standard. And then a new weight-assessing method is developed for calculation of the weights based on the relative membership degree matrix. Finally, a multi-hierarchy fuzzy optimum model is adopted to select t     

烟单14号夏玉米产量三因素最佳取值范围的探讨

作者根据大量试验和调查数据的分析,提出烟单14号夏玉米在高产条件下,亩穗数、穗粒数、千粒重三因素的最佳取值范围。 亩穗数:3569～4980 穗/亩; 穗粒数:423～526 粒/穗; 千粒重:259～278 克/1000粒。     

地震作用下的导管架海洋平台结构动力优化设计研究

把导管架海洋平台看作钢框架结构，并把优化方法用于结构的抗震设计中；以结构的总重量最小为优化目标，导管的平均直径和壁厚作为设计变量，考虑强度、刚度和稳定等约束条件。通过渤海BZ28—1油田储油平台为例进行了计算，计算结果表明，此方法对海洋平台的设计具有一定的参考意义。     

Optimum Sample Size to Detect Perturbation Effects: The Importance of Statistical Power Analysis – A Critique

Abstract. The current article describes statistical power analysis as an efficient strategy for the estimation of the optimum sample size. The principle aim is constructively to criticise and enrich the results presented by Mouillot et al. (1999) , who estimate the optimum sample size for evaluating possible perturbations. The authors did not make any reference to statistical power analysis, even though their objective clearly went beyond a simple stock evaluation to assess management strategies in a particular marine ecosystem. Surprisingly, they proposed (a priori) an ANOVA design to test a hypothesis considering both space and temporal scales. However, the authors did not cover important topics related with power analysis and the precautionary principle, both used into environment impact assessment programmes for marine ecosystems. Based on their results and on statistical power analysis, it is demonstrated that the variability (dispersion statistics), a key factor they used to estimate the sample size, is less relevant than the magnitude of perturbation (effect size). Therefore, a greater effort must be devoted to estimate the effect size of a particular phenomenon rather than a desired variability.     

水中矿物油荧光特性实验研究

为了实现现场测量地表水中矿物油含量的全光纤荧光计的研制。采用荧光光谱测量分析方法 ,于 1 999年 1 0月— 2 0 0 0年 5月 ,采集了国内外不同的地区原油和成品油共 2 3种 ,用1 4种不同波长的激发光激励 ,进行荧光光谱特性测量实验研究。同时 ,对不同浓度的矿物油、水混合液也进行了测量实验 ,得出其最低检测浓度为 0 .0 0 5mg/L ;测量了青岛近岸海域表层受油污染海水的含油量为 0 .0 1～ 0 .2 2mg/L ;此外对水中矿物油受激荧光发射原理也作了简述。并对水中矿物油荧光光谱特性、浓度与荧光强度的关系 ,以及为研制现场测量水中矿物油浓度的全光纤荧光计的可能性作出了结论性的意见     

自组织竞争人工神经网络在砂岩型铀矿测井数据解释中的应用

详细介绍了自组织竞争人工神经网络模型结构、原理和钻孔岩性自动识别过程,给出了神经网络模型在钻孔岩性自动识别过程中的有效性实例。自组织竞争人工神经网络具有自组织能力、自适应能力和较高的容错能力;与BP算法相比较,计算量小,收敛速度快,且不需要已知的先验信息而自动确定分类类别。钻孔岩性识别结果与岩心地质编录的对比试验表明,在砂岩型铀矿测井数据的解释中,应用自组织竞争人工方法可较好地完成钻孔岩性自动分类。     

镇泾地区延长组河流相砂体分布与圈闭形成的关系研究

鄂尔多斯盆地镇泾地区侏罗系地层以三角洲-湖泊沉积体系为主,研究区范围内主要发育主河道和部分分流河道砂体。研究区构造平缓,主要为单斜地层、在东南部存在大型鼻状构造。通过对主要储层段(长6、8油层组)砂体分布及与构造之间关系进行研究,分析砂体走向与构造线方向的关系认为在构造单斜地区,当两者相交时(交角β≠0)是形成圈闭的关键因素之一,在大型鼻状构造地区因构造线的弯曲与河道砂体组合可以形成圈闭。根据研究区砂体分布和构造线组合出4种地层-岩性及岩性圈闭。利用构造图与砂体分布图对主要储层段存在的圈闭确定出长6、8油层组10个层圈闭。