Readout Techniques for Drift and Low Frequency Noise Rejection in Infrared Arrays

Three different methods are presented to subtract thermal drifts and low-frequency noise from the signal of infrared array. The first is dead pixels with open Indium bumps, the second is reference output as implemented on the Hawaii2 multiplexer, and the third is dark pixels to emulate reference cells having a capacity connected to the gate of the unit cell field-effect transistor (FET). The third method is the most effective and yields a reduction in readout noise from15.4–9.4 erms. A novel method will be described to extend this readout technique to the Aladdin 1 K × 1 K InSb array. This revised version was published online in July 2006 with corrections to the Cover Date.     

Use of Noise to Augment Training Data: A Neural Network Method of Mineral–Potential Mapping in Regions of Limited Known Deposit Examples

One of the main factors that affects the performance of MLP neural networks trained using the backpropagation algorithm in mineral-potential mapping isthe paucity of deposit relative to barren training patterns. To overcome this problem, random noise is added to the original training patterns in order to create additional synthetic deposit training data. Experiments on the effect of the number of deposits available for training in the Kalgoorlie Terrane orogenic gold province show that both the classification performance of a trained network and the quality of the resultant prospectivity map increasesignificantly with increased numbers of deposit patterns. Experiments are conducted to determine the optimum amount of noise using both uniform and normally distributed random noise. Through the addition of noise to the original deposit training data, the number of deposit training patterns is increased from approximately 50 to 1000. The percentage of correct classifications significantly improves for the independent test set as well as for deposit patterns in the test set. For example, using ±40% uniform random noise, the test-set classification performance increases from 67.9% and 68.0% to 72.8% and 77.1% (for test-set overall and test-set deposit patterns, respectively). Indices for the quality of the resultant prospectivity map, (i.e. D/A, D × (D/A), where D is the percentage of deposits and A is the percentage of the total area for the highest prospectivity map-class, and area under an ROC curve) also increase from 8.2, 105, 0.79 to 17.9, 226, 0.87, respectively. Increasing the size of the training-stop data set results in a further increase in classification performance to 73.5%, 77.4%, 14.7, 296, 0.87 for test-set overall and test-set deposit patterns, D/A, D × (D/A), and area under the ROC curve, respectively.     

图像噪声的Wiener谱分析

本文讨论图像处理过程中分析噪声的主要手段，RMS颗粒度，自相关函数，Wiener谱的定义和测试方法以及噪声仿真技术。     

Noise reduction and detection of weak, coherent signals through phase-weighted stacks

We present a new tool for efficient incoherent noise reduction for array data employing complex trace analysis. An amplitude-unbiased coherency measure is designed based on the instantaneous phase, which is used to weight the samples of an ordinary, linear stack. The result is called the phase-weighted stack (PWS) and is cleaned from incoherent noise. PWS thus permits detection of weak but coherent arrivals. The method presented can easily be extended to phase-weighted cross-correlations or be applied in the τ p domain. We illustrate and discuss the advantages and disadvantages of PWS in comparison with other coherency measures and present examples. We further show that our non-linear stacking technique enables us to detect a weak lower-mantle P -to- S conversion from a depth of approximately 840 km on array data. Hints of an 840 km discontinuity have been reported; however, such a discontinuity is not yet established due to the lack of further evidence.     

利用背景噪声的分形方法监控台站观测系统运行状态

使用全国23个国家测震台站和17个实验台站地震计记录的背景噪声数据,研究特定尺度(限定频带内)的背景噪声特性,分析利用分形方法监测台站观测系统运行状态的可行性.结果 表明,分形方法具有较强的时域性,定量化程度高、抗干扰能力强,基本不受观测系统参数约束,可用于台站观测系统运行状态检测,减少正常记录瞬间中断和引入人为干扰的...     

MT法中利用阻抗相位资料对畸变视电阻率曲线的校正

从理论上论证了在一定条件下大地电磁响应中的相位资料将不受随机电磁噪声的影响，介绍了由相位资料递推计算视电阻率的方法，通过与远参考资料的比较，证明利用阻抗相位资料可分段恢复校正畸变的实测视电阻率数据。     

风廓线雷达估算大气返回信号功率方法研究

基于风廓线雷达大气返回信号功率谱中噪声电平的估算方法,统计分析了北京延庆对流层风廓线雷达（CFL-08）2006年10～12月的探测数据。对该频段风廓线雷达环境噪声的空间和时间变化进行了分析,观测期间环境噪声在5km以下随高度递减,10月的平均环境噪声大于11月、12月的平均分布。给出目前风廓线雷达用信噪比估算大气返回信号功率的两种方法,并对两种方法进行了环境噪声的剔除,经过修正后的大气返回信号功率输出结果趋于一致。     

利用地震噪声准实时监测短周期面波波速变化

依据由噪声信号提取面波格林函数的原理,利用福建省地震台网25个宽频带台站2007年7月2日—8月29日的脉动观测资料,得到了瑞雷波群速度在福建地区的分布,并将该结果作为下一步相对变化动态成像的背景速度分布．分布结果表明,福建地区周期为3—5s的瑞雷波群速度大致在2.9—3.1km/s之间,平均速度为3.0km/s,瑞雷波群速度分布呈北高南低的现象,这与福建地区北部多山、南部多平原盆地的地理环境有很好的吻合．而且,该群速度分布图在漳州盆地地区表现出一个非常明显的低速,这主要是因为受到盆地沉积层的影响．通过滑动窗（窗长为20d,步长1d）技术得到了观测区内周期约为3-5s的瑞雷波波速分布变化的连续图像;再利用扣除背景影响的技术,得到了2007年8月14日—2008年7月1日福建地区瑞雷波波速的相对变化时空动态图像．通过分析相对变化时空动态图像与该时间范围内发生的地震的对应关系,表明福建地区瑞雷波波速在多次网内中等强度的地震或震群（ML＞3.0）中均表现出震前波速升高,震后下降恢复的变化趋势．初步分析认为,这可能与震前整个地区受到的应力增大震后应力得到释放所导致的介质变化有关．