Simulating methane emission from a Chinese rice field as influenced by fertilizer and water level

Natural and agricultural wetlands are considered to be the major sources of global atmospheric methane (CH₄). A one‐dimensional model was developed to simulate methane emission and used to examine the influence of various physical processes on the rate of methane emission. Three processes involved in the methane emission are implemented in the model: production, reoxidation and transport. Three transport pathways were considered: diffusion across water–air or soil–air interfaces, ebullition and diffusion through plants. These pathways are influenced by soil properties, plant growth, water‐table conditions, temperature and external inputs (e.g. fertilizer). The model was used to examine the seasonal variation of the methane emission at a rice field in Hunan, China, which was observed during a field experiment for consecutive (early and late) rice seasons in 1992. The observed seasonal variations of methane emission, and role of plants in transporting methane to the atmosphere, are captured by the model simulation. Further model applications were conducted to simulate effects of fertilizer and water‐level condition on the methane emission. The results indicate that unfermented organic fertilizer produces a higher methane emission rate than mineral fertilizer. The simulations with treatments of a deep‐water covering and constant moisture reduced the methane emission. The rice field study provides a framework for further development of the model towards simulations based on spatially distributed variables (e.g. water table, soil temperature and vegetation) at a regional scale. Copyright © 2003 John Wiley & Sons, Ltd.     

Does subterranean flow initiate mud banks off the southwest coast of India?

Coastal waters off the southwest coast of India draw special attention because of the occurrence of mud banks at certain locations during southwest monsoon period. The present study puts forward a hypothesis of a subterranean flow, which could be a plausible mechanism to initiate the mud banks. The subterranean flow is believed to be coupled with activated trending faults and originate from the adjacent watershed (Vembanad Lake) separated from the sea by a narrow strip of land where submerged porous lime shell beds are present. When the lake water injection occurs through the fault, the mud/clay gets excited by its thixotrophic properties (as the overlying water looses its electrolyte) and transforms into a flowing fluid. The lowering of salinity due to the introduction of fresh water keeps the mud suspension in the water column for longer duration, leading to the formation of mud banks. The idea of subterranean flow through lime shell beds initiating formation of mud banks may apply globally to any coastal regions hugged by wetlands and of similar geological conditions.     

GIS在处置地下管线突发事件中的应用研究——以苏州市地下综合管网应急处置系统为例

随着经济社会的不断发展,城市建设步伐不断加快。近几年,各类地下管线突发事件频发。通过"苏州市地下综合管网应急处置系统"项目的开发和实践,本文试图从总体上论述地下综合管网突发事件的处置过程、应用原理及相关的技术实现,重点阐述了基于"12345"便民服务中心工作平台,在充分利用GIS的网络分析技术的基础上,实现城市地下管网突发事件应急处置的自动化和信息化。     

About the specification of erosion flux for soft stratified cohesive sediments

The present paper deals with the specification of bed erosion flux that accounts for the effects of sediment-induced stratification in the water column. Owing to difficulties in measuring the bed shear stress _b and the erosive shear strength _s, we suggest a series of methods that combine laboratory and numerical experiments. A simplified turbulent transport model that includes these effects helps to quantify _b and _s. Focusing on soft stratified beds, the present study considers erosion rate formulas of the form =_f exp {[T_b-T_s]} where is a model constant (=1 for Gularte's (1978) formula and =1/2 for Parchure's (1984) formula). First, the bed erosive strength profile _s(Z) is adjusted by forcing the turbulent transport model with measured erosion rates. Second, three procedures are suggested to determine the erosion rate formula coefficients _f and : a global procedure and two different layer-by-layer procedures. Each procedure is applied to an erosion experiment conducted in a rotating annular flume by Villaret and Paulic (1986). The use of the layer-by-layer procedure based on a least squares fitting technique provides a closer fit than the global procedure. The present study points out the complementarity of experimental and numerical approaches and also suggests possible improvements in laboratory test procedures.     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

Molar tooth structures of the Neoarchean Monteville Formation, Transvaal Supergroup, South Africa. I: Constraints on microcrystalline CaCO3 precipitation

Molar tooth (MT) structures are enigmatic, contorted millimetre‐ to decimetre‐long veins and spheroids of microcrystalline calcite that formed during very early diagenesis in Precambrian sediments. MT structures in the ca 2·6 Ga Monteville Formation are 600–800 Myr older than previously reported occurrences and establish that conditions necessary for MT genesis were met locally throughout much of the Precambrian. In the Monteville Formation, MT structures were formed shallow subtidally, extending to depths near storm wave base, in shale host sediments intercalated with storm‐generated carbonate sand lenses. They are filled with microcrystalline calcite and rare pyrite. Microcrystalline calcite identical to that in MT structures fills other pore space, including porosity between grains in carbonate sand lenses, moldic porosity in sand grains, sheet cracks in columnar stromatolites, and shallow cracks on sandy bedding planes. Relationships in the Monteville Formation demonstrate that microcrystalline CaCO₃ precipitated in fluid‐filled cracks and pores; microcrystalline calcite characteristics, as well as the paucity of carbonate mud in host rocks, are inconsistent with injection of lime mud as the origin of MT structures. Locally, MT cracks were filled by detrital sediment before or during precipitation. Precipitation occurred in stages, and MT CaCO₃ evolved from granular cores to a rigid mass of cores with overgrowths – allowing both plastic and brittle deformation of MT structures, as well as reworking of eroded MT structures as rigid clasts and lime mud. Crystal size distributions and morphology suggest that cores precipitated through nucleation, Ostwald ripening and size‐dependent crystal growth, whereas overgrowths formed during size‐independent crystal growth.     

泥晶灰岩地层孔壁坍塌掉块现象及处理

在灰岩地区钻探施工过程中，常见孔壁坍塌、掉块现象，尤其在含泥晶灰岩地层分布区钻进过程中，这种现象尤为突出，轻则影响钻探施工效率，重则造成钻探孔内事故。针对孔内坍塌、掉块现象的征兆及特点，提出了相对应的处理办法。     

旧供水井化学处理方法介绍--以加德满都市旧供水井修复为例

本文以加德满都市旧供水井修复项目为例,针对因滤水管缝隙被化学物质堵塞,导致井出水量逐年减少的旧供水井。通过井下电视摄像系统检查,采用六偏磷酸钠、氨基黄酸等有机酸,结合刷洗、高压喷射等机械方法进行处理,使旧供水井出水量得到明显提高。     

某地平板玻璃原料用石英砂的提纯研究

某地石英矿砂通过磁选分离法、稀酸浸泡法处理后，矿砂不同程度地降低了铁、铝、钙镁的含量；采用磁选分离 稀酸浸泡法联合处理后，使该地石英砂的化学成分达到了优质的生产平板玻璃用硅质原料的国家标准。     

光催化氧化法处理难降解废水的研究进展

综述了光催化氧化处理难降解废水的研究现状及发展趋势。介绍了影响光催化氧化反应速率的因素及光催化氧化法在处理难降解废水中的应用。