Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

Time–space fractional governing equations of transient groundwater flow in confined aquifers: Numerical investigation

In order to model non‐Fickian transport behaviour in groundwater aquifers, various forms of the time–space fractional advection–dispersion equation have been developed and used by several researchers in the last decade. The solute transport in groundwater aquifers in fractional time–space takes place by means of an underlying groundwater flow field. However, the governing equations for such groundwater flow in fractional time–space are yet to be developed in a comprehensive framework. In this study, a finite difference numerical scheme based on Caputo fractional derivative is proposed to investigate the properties of a newly developed time–space fractional governing equations of transient groundwater flow in confined aquifers in terms of the time–space fractional mass conservation equation and the time–space fractional water flux equation. Here, we apply these time–space fractional governing equations numerically to transient groundwater flow in a confined aquifer for different boundary conditions to explore their behaviour in modelling groundwater flow in fractional time–space. The numerical results demonstrate that the proposed time–space fractional governing equation for groundwater flow in confined aquifers may provide a new perspective on modelling groundwater flow and on interpreting the dynamics of groundwater level fluctuations. Additionally, the numerical results may imply that the newly derived fractional groundwater governing equation may help explain the observed heavy‐tailed solute transport behaviour in groundwater flow by incorporating nonlocal or long‐range dependence of the underlying groundwater flow field.     

BRINGING FORWARD OF THE CONCEPT OF COGIS AND ITS ARCHITECUTRE RESEARCH

Based on the analysis of the development of GIS technology and application,this paper brought forward the concept of GoGIS,namely Cooperative GIS ,CoGIS is GIS facing group-users and supporting human-human interaction,which makes it differ from the former GISs,Then,the characteristics of general Computer Spport Cooperative Work (CSCW)applications and the complexity of Geographic Information Science were analyzed,and the conclusion the CoGIS was not a simple GIS layer on CSCW was reached,Further,this paper gaver the hierarchical architecture of CoGIS,and analyzed the coperative platform in detail from the following:1)basic elements;2) collaboration patterns;3) cooperation control mechanism;4) synchronization mechanism;5) security and 6) group communication and so on.With those,the problems about GIS applications are discussed,such as 1)distributed multi-source GIS information and knowledge sharing platform;2)the fusion and visualization of GIS information;3)virtual reality cooperative modeling;4) dymamic simulation;5)expert system and 6) decision-making.Finally,this paper analyzed CoGIS application mode in brief.     

有关边界层问题中一类奇异积分方程新的存在性结果

对边界层理论新结果中出现的一类奇异积分方程w（t）=∫1 t（1-s）（λ＋λs＋s）/w（s）ds＋（1-t）∫t 0s/w（s）ds,t∈（0,1）进行讨论，并得出了上述方程在λ∈（-1/2,0）上正解存在性的新结果。     

关于Diophantine方程的解

对于正整数a ,设S(a)是Smarandache函数。证明了 :方程S(1·2 ) +S(2·3) +… +S(x(x +1) ) =S(x(x +1) (x +2 ) /3)仅有正整数解x =1。     

Optimal Filtering Algorithm for Stochastic 2-D FMM Ⅱ with Multiplicative Noise

1　Introduction　Inrecentyearstherehasbeengrowingresearchin terestinthetwo dimensional (2 D )systemtheory .The 2 Dsystemsmayfindapplicationsinareassuchasmarineseismicdataprocessingandimageprocessing .Althoughmoreandmorevaluableresultshavebeengained ,mos…     

用比电导法研究活性炭的吸附特性

用比电导法研究两种活性炭自稀水溶液中吸附强电解质硫酸铬和硫酸铜的吸附平衡特性。结果表明,在本文的研究条件下,两种活性炭对硫酸铬和硫酸铜都有吸附作用。同时,活性炭吸附硫酸铜的吸附平衡特性可以用 Freundlich 方程式来描述。研究的结果对固体在溶液中的吸附基础理论以及处理工业废水具有一定的意义。     

Transient‐state groundwater flow in various geometries with wells at arbitrary positions: analytical methods

We have developed a method for analytically solving the porous medium flow equation in many different geometries for horizontal (two‐dimensional), homogeneous and isotropic aquifers containing impermeable boundaries and any number of pumping or injection wells located at arbitrary positions within the system. Solutions and results are presented for rectangular and circular aquifers but the method presented here is easily extendible to many geometries. Results are also presented for systems where constant head boundary conditions can be emulated internal to the aquifer boundary. Recommendations for extensions of the present work are briefly discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

居民收入与通信网络市场经济效益研究--以河北省通信网络为实例

利用Logisitic曲线模型和扩展支撑模型对居民可支配收入预测和单项消费预测，以河北省居民的收入及其消费支出为实例，研究了城镇居民和农民的可支配收入分配和单项边际消费倾向，合理建立了预测模型，并理论计算了1999～2003年的通信消费方面的边际消费倾向、预测了2004～2008年通信消费情况。最后，根据预测结果对通信网络建设提出了一些有价值的建议。     

Tidal dwarfs in the M81 group: the second generation?

We present a quantitative star formation history derivation of the four suspected tidal dwarf galaxies in the M 81 group: Holmberg IX, BK3N,Arp-loop (A0952+69) and Garland using HST/WFPC2 images of these galaxies. We construct a library of synthetic Colour-Magnitude Diagrams(CMDs) based on theoretical isochrones and data-derived determinations of photometric errors. These synthetic CMDs were combined linearly andχ²-compared to observed photometry. All the galaxies show continuous star formation between about 20 and 200 Myr ago with star formation rates between 7.5⋅10^-3 M_⊙/yr and 7.67⋅10^-4 M_⊙/yr. The metallicity of the detected stars is spanning rather a wide range, being lower than solar abundance. We suppose, that all the galaxies were formed out of material from metal-poor outer part of the giant spiral galaxy M81after tidal interaction about 200 Myr ago. However, this suggestion requires significantly more deep color-magnitude diagrams to be sure with the scenario of the galaxy evolution. This revised version was published online in July 2006 with corrections to the Cover Date.