邻菲啰啉在测定亚铁中的保护效果

样品在分解过程中 ,亚铁易被空气部分氧化 ,致使测试结果偏低 ,采用在HF H2 SO4溶矿过程中加入邻菲卟罗啉 ,与亚铁形成络合物 ,对保护亚铁具有较好的效果。拟定了在塑料坩埚中加邻菲卟罗啉、H2 SO4及HF ,中高温电热板溶矿 ,容量法测定样品中的亚铁 ,方法精密度为 0 .2 3% ,样品加标准回收率 98.8%～ 10 1.9%。此方法具有较好的应用效果     

Relict mountain slope deposits of northern Portugal: facies,sedimentogenesis and environmental implications

This paper deals with the formation processes and the palaeoenvironmental significance of relict slope deposits located on the uppermost part of the north Portugal mountains. For this purpose, seven key sites representative of the different lithofacies have been selected and analysed in detail. The data show that three main dynamic processes are responsible for the emplacement of regional fossil slope deposits: runoff, debris flows and dry grain flows. The ubiquity of these processes and the lack of frost‐related features or landforms do not support the existence of severe Pleistocene climates in this part of the lberian Peninsula as postulated by previous work. Pedological data gathered at one of the study sites show that a subalpine environment was probably present at 700–800 m altitude between 29 and 14 kyr. Using data from the Pyrenees Mountains, a 6.5 to 12°C depression in mean annual temperature has been tentatively postulated for this Pleniglacial period. Copyright © 2003 John Wiley & Sons, Ltd.     

The grain-size characteristics of Quaternary deposits at Xingshan near Siping in Jilin province, China

This research paper analyses the grain-size characteristics of the Quaternary deposits at Xingshan near Siping, Jilin province in China by employing graphic measures to study the grain size distribution and its mode of transport and deposition. The Quaternary deposits at Xingshan lie unconformable on Cretaceous rocks made of siltstone, mudstone and sandstone. The average grain size is between 8.06 to 8.55Φ (0.002 6 ～0.003 7 mm). The Quaternary deposits at Xingshan mainly compose of very fine silt to clay. The compositions of the grade are clay 63% and silt 37%. The clay size components are weathered debris transported and deposited by flowing water from the SE highlands or hills to the low lying NW Xingshan plains whereas the silty components accumulated by aoelian process. The Quaternary deposits at Xingshan accumulated in the middle and late Pleistocene interglacial periods from (459.12～39.03) ka to (88.92～7.56) ka. The standard deviation ranged from 0.96 to 1.36Φ, indicating that the sediments are moderately to poorly sorted, Coefficient of skewness ranged from 0.16～0.31 with an average skewness of 0.218, (Positively skewed towards fine). Kurtosis values (0.84～1.05) from the grain size distribution and visual inspection of the frequency curves indicate platykurtic to mesokurtic curves and unimodal to bimodal grain-size distribution. The type of deposit formation is sand dune and the source is at a distal from its provenance.     

上扬子地台震旦系铅锌矿床类型及找矿方向

上扬子地台含铅锌矿地层主要为震旦系。震旦系在上扬子地台主要发育上统灯影组,次有下统陡山沱组。将上扬子地台震旦系铅锌矿床成因划分为一级为叠生矿床,二级为层控矿床,三级为热水沉积改造矿床和热水沉积再造矿床四级类型,该类型按铅锌比例进一步划分为富铅型、富锌型、铅锌共生型。研究区内最重要的铅锌矿床成因类型为南郑马元、会东大梁子铅锌矿为代表的富锌型。陕西南郑、紫阳—镇坪地区,湖北武当、神农架、黄陵地区,以及地台西缘的安宁河、甘洛—小江、峨边—寻甸等地区的震旦系是寻找铅锌矿的最有利地段。     

Application of Grain Size Analysis to Study Sedimentary Environment of Sand Dune in the Vicinity of Tumen River

The dunes in estuary of Tumen River in China lie to the area between the Jiushaping and Fangchuan in the left bank of Tumen River (Fig.1). The dis-tance is about 15～20 km between the dunes and the coast. It ranges from China to D. P. R. Korea and Russia. The range of the height of dunes is about 15～20 m and the width is 100～200 m. By the re-connaissance, we protracted 9 section planes of the dunes and collected 40 sand samples of the dunes, and identified the sedimentary environment …     

柴达木盆地东北缘古元古代变质镁铁—超镁铁质岩的地质特征及成因探讨

1:5万区域地质调查工作中,在柴达木陆块北缘首次发现古元古代变质镁铁—超镁铁质岩,获得成岩年龄为1952±15Ma,其岩石化学、地球化学特征反映出岩浆来源于亏损地幔,反映出该地区克拉通在古元古代(19亿年)发生了一次强烈的裂解(洋)事件,对于研究柴达木盆地北缘元古代结晶基底地质构造演化及进一步探讨柴达木盆地的起源及构造演化过程提供了重要地质线索。     

Ab initio infra-red spectra of iron-polycyclic aromatic hydrocarbon compounds: a model case

C₁₀H₆-Fe⁺ complexes were observed by Fourier transform mass spectrometry by Marty et al. (Chem. Phys. Lett. 256 (1996) 669). In this article, we present the infra-red (IR) spectra of the two isomers calculated by ab initio methods of quantum chemistry. In the past, the same approach has predicted successfully unexpected features of the IR spectra of polycyclic aromatic hydrocarbon (PAH) cations which were confirmed by measurements in matrices (J. Phys. Chem. 98 (1994) 9187). The C₁₀H₆-Fe⁺ systems are models for larger PAHs-Fe⁺ complexes, which are believed to play a key rôle in space chemistry.     

Metamorphic evolution of exhumed middle to lower crustal rocks in the Mojave Extensional Belt, southern California, USA

The Waterman Metamorphic Complex of the central Mojave Desert was exposed as a consequence of early Miocene detachment-dominated extension. However, it has evidence consistent with a more extensive geological history that involves collision of a crustal fragment(s), tectonic thickening by overthrusting and two periods of extension. The metamorphic complex contains granitoid intrusives and felsic mylonitic gneisses as well as polymetamorphic rocks that include marble, calc-silicate, quartzite. mafic granulite, pyribolite, amphibolite, migmatite and biotite schist. The latter group of rocks was affected by an initial series of high-grade metamorphic events (M1 and M2) and a localized lower grade overprint (M3). The initial metamorphism (M1) can be separated into two stages along its high-grade P–T path: M1a, a granulite facies metamorphism at 800–850° C and 7.5–9 kbar and Mlb, an upper amphibolite facies overprint at 750–800° C and 10–12 kbar. M1a developed mineral assemblages and textures consistent with granulite facies conditions at a reduced activity of H₂O and is associated with intense ductile deformation (D1) and minor local partial melting. M1b overprinted the granulite assemblages with a series of hydrous phases under conditions of increasing pressure and H₂O activity and is accompanied by little or no deformation. M2 developed at lower pressures and temperatures (650–750° C, 4.5–5.5 kbar) and is distinguished by a second local overprint of hydrous phases that reflects an input of aqueous fluids probably associated with the intrusion of a series of granitic dykes and veins. Effects of M3 are confined to the Mitchel detachment zone, an anastomosing early Miocene detachment fault, and are characterized by local ductile/brittle deformation (D2) of the pre-existing high-grade rocks and granitoid intrusives and by the production of mylonites and mylonitic gneisses under greenschist facies conditions (300–350° C, 3–5 kbar). The initial overprint (M1a) represents metamorphism, devolatilization and minor partial melting of supracrustal rocks under granulite facies conditions as a consequence of tectonic and, possibly, magmatic thickening. The increasing pressure transition of M1a to M1b reflects a period of continued compressional tectonism, thrusting and influx of H₂O, in part, locally related to crystallization of partial melts. The near isothermal decompression between M1b and M2 probably represents a pre-112-Ma extensional episode that may have been the result of a decompressional readjustment of a thickened crust. Following the initial extensional event, the metamorphic complex remained at depths of 10–17 km for at least 90 Ma until it was uplifted following Miocene extension. M3 develops locally in response to this second extensional period resulting from the early Miocene detachment faulting.