The second order characteristic condition for plastic flow

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.     

Fast iterative solution of large undrained soil‐structure interaction problems

In view of rapid developments in iterative solvers, it is timely to re‐examine the merits of using mixed formulation for incompressible problems. This paper presents extensive numerical studies to compare the accuracy of undrained solutions resulting from the standard displacement formulation with a penalty term and the two‐field mixed formulation. The standard displacement and two‐field mixed formulations are solved using both direct and iterative approaches to assess if it is cost‐effective to achieve more accurate solutions. Numerical studies of a simple footing problem show that the mixed formulation is able to solve the incompressible problem ‘exactly’, does not create pressure and stress instabilities, and obviate the need for an ad hoc penalty number. In addition, for large‐scale problems where it is not possible to perform direct solutions entirely within available random access memory, it turns out that the larger system of equations from mixed formulation also can be solved much more efficiently than the smaller system of equations arising from standard formulation by using the symmetric quasi‐minimal residual (SQMR) method with the generalized Jacobi (GJ) preconditioner. Iterative solution by SQMR with GJ preconditioning also is more elegant, faster, and more accurate than the popular Uzawa method. Copyright © 2003 John Wiley & Sons, Ltd.     

关于多项式特征值的条件数

Tisseur(2000)研究了非齐次多项式特征值问题的条件数，所得结果的不足是对无穷特征值必须另外处理；Declieu和Tisseur(2003)运用微分几何方法研究了齐次多项式特征值问题的条件数，所得结果的不足之处是与系数矩阵的尺度化(scaling)有关。这两种条件数都有各自的应用范围。本文基于投影尺度引入齐次多项式特征值问题的条件数，其优点是与系数矩阵的尺度化无关，因而也许会有较广泛的应用。     

南海晚第四纪硅藻遗体及其地质意义：Ⅷ.几个问题的讨论

本文根据分析结果阐述了两种不同样品处理方法所获得的硅藻丰度和微型硅藻的人主要种类和相对百分含量。研究表明洗涤富集法所获得的硅藻丰度存在较大误差；微型硅藻的含量普遍介于１０％－２０％之间，最高可达４２．３１％，最低为５．６６％，并指出了在微型硅藻相对含量大于２０％的样品中 ，其主要种类为具槽直链藻和条纹小环藻等沿岸底格格不入中，并成群体产出。     

Fully nonlinear numerical wave tank (NWT) simulations and wave run-up prediction around 3-D structures

A finite-difference scheme and a modified marker-and-cell (MAC) algorithm have been developed to investigate the interactions of fully nonlinear waves with two- or three-dimensional structures of arbitrary shape. The Navier–Stokes (NS) and continuity equations are solved in the computational domain and the boundary values are updated at each time step by the finite-difference time-marching scheme in the framework of a rectangular coordinate system. The fully nonlinear kinematic free-surface condition is implemented by the marker-density function (MDF) technique developed for two fluid layers.To demonstrate the capability and accuracy of the present method, the numerical simulation of backstep flows with free-surface, and the numerical tests of the MDF technique with limit functions are conducted. The 3D program was then applied to nonlinear wave interactions with conical gravity platforms of circular and octagonal cross-sections. The numerical prediction of maximum wave run-up on arctic structures is compared with the prediction of the Shore Protection Manual (SPM) method and those of linear and second-order diffraction analyses based on potential theory and boundary element method (BEM). Through this comparison, the effects of non-linearity and viscosity on wave loading and run-up are discussed.     

柴达木盆地新构造运动主要特征与成因机制

研究表明，在壳幔结构、地球物理背景、沉积物结构、多层关地幔和构造样式等方面，达木盆地与中国东部新生代裂谷类伸展盆地具有可比性，应该归属 展性盆 。盆地伸展和收缩作用相间进行，伸展起因于地幔底辟；而收缩受两人因素影响；（１）盆地伸展作用受相邻造山带反作用诱导的挤压应力；（２）板块碰撞传递的远程板内应力。在此基础邮新的构造期达木盆地演化的“双层模式”，即地幔上隆－地壳伸展；被动挤压＋板内应力－地壳收缩     

玛纳斯河一级电站引水渠沿线提取地下水进行融冰的可行性研究

通过对向斜洼地含水层水文地质特征的勘探及研究,对研究区的水文地质边界条件进行了概化,并用水均衡法估算了地下水资源量,对拟建一级电站引水渠沿线提取地下水进行融冰的可行性进行了研究,并提出了取水方案.     

得尔布干成矿带中段八大关——新峰山成矿地质条件分析

得尔布干成矿带中段八大关—新峰山地区断裂构造发育 ,北东向得尔布干深大断裂是重要的控岩控矿构造。与成矿有关岩浆岩主要为燕山期的中性—中酸性侵入岩及次火山岩。赋矿层位主要有上库力组、塔木兰沟组及谢尔塔拉组。在分析典型矿床的成矿地质特征基础上 ,进一步指出找矿方向     

庐山星子群变质岩的变质作用P-T条件研究

对分布于扬子块体南缘古元古代星子群变质宏的变质作用研究表明，它们普遍经历了角闪岩相的变质，其变质温度为480℃-580℃，压力在300MPa-500MPa之间。这与扬子块体南缘其他元古代地层仅经历了轻微变质的事实截然不同，表明星子群变质岩具有独特的构造演化历史。越来越多的研究发现，星子群变质岩是由地壳伸展作用引发的、来源于下地壳的前寒武纪变质基底，它并不是来源于华夏块体的“飞来峰”。     

场地条件对地震动相干函数的影响

本通过弹性半空间内位错源的数值解法研究了曲岩地震动相干函数，采用有限元方法分析了一些典型场地的地表地震动相干函数，两的对比结果表明：复杂场地对地震动相干函数的影响强烈。