Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

The WRF model performance for the simulation of heavy precipitating events over Ahmedabad during August 2006

The summer monsoon season of the year 2006 was highlighted by an unprecedented number of monsoon lows over the central and the western parts of India, particularly giving widespread rainfall over Gujarat and Rajasthan. Ahmedabad had received 540.2mm of rainfall in the month of August 2006 against the climatological mean of 219.8mm. The two spells of very heavy rainfall of 108.4mm and 97.7mm were recorded on 8 and 12 August 2006 respectively. Due to meteorological complexities involved in replicating the rainfall occurrences over a region, the Weather Research and Forecast (WRF-ARW version) modeling system with two different cumulus schemes in a nested configuration is chosen for simulating these events. The spatial distributions of large-scale circulation and moisture fields have been simulated reasonably well in this model, though there are some spatial biases in the simulated rainfall pattern. The rainfall amount over Ahmedabad has been underestimated by both the cumulus parameterization schemes. The quantitative validation of the simulated rainfall is done by calculating the categorical skill scores like frequency bias, threat scores (TS) and equitable threat scores (ETS). In this case the KF scheme has outperformed the GD scheme for the low precipitation threshold.     

基于分区的局域神经网络时空建模方法研究

区域数据表现为两种尺度的空间特性:反映全局特征的空间依赖性和反映局域特征的空间波动性.空间波动性表现为空间数据在局部地区的聚集或高低交错现象.在研究区域数据时空预测性建模时,从降低数据的空间波动和不平稳性对模型预测能力的影响角度出发,提出了一种基于分区的局域神经网络时空非线性建模的思路.分区过程由基于空间邻接关系的K-means聚类算法完成.不同的分区方案通过相关性、波动性、紧凑性等指标进行评价和优选.在确定最优分区方案的基础上,对各子区分别采用两层前馈网络进行建模,模型的输入不仅要考虑本区内单元的作用,而且要考虑相邻子区的边界效应.各神经网络模型的时空预测能力通过平均相均差和动态相似率等指标进行衡量.最后,通过对法国94个县每周流感报告病例的时空建模分析表明,与全局神经网络模型相比,基于分区的局域神经网络模型具有更好的预测能力.     

Taxonomical and Biogeochemical Investigation of Elements in Holocene Mollusk Shells in the South and Southwestern Marmara Basin,Turkey

Concentrations of some heavy metals and trace elements such as Cr, Ga, Ni, Zn, Mo, Cu, Pb, Yb, Y, Nb, Ti, Sr, Ba, Mn, Sc, Co, V, Zr, Fe, Al, W, Se, Bi, Sb, As, Cd in recent mollusk shells and factors affecting their distribution and deposits collected from various depths in the southern and southwestern parts of the Marmara Sea are investigated. The distribution of the elements in the shells is categorized into four groups. Of these, concentrations of 12 elements （As, Bi, Cd, Co, Ga, Mo, Nb, Sb, Se, Sc, W and Yb） are below zero [（0.053-0.79）×10^-6]; concentrations of seven elements （Cr, Ni, Pb, V, Y, Zr and Cu） are （1.0-6.0）×10^-6; concentrations of four elements （Ti, Mn, Ba and Zn） are 10- 20×10^-6; and concentrations of five elements （Si, Al, Fe, Mg and Sr） are （47.44-268.11）×10^-6. The taxonomic characteristics of the 29 elements were studied separately in mollusk shells such as Chamalea gallina （Linn6）, Pitar rudis （Poli）, Nassarius reticulatus （Linn6）, Venerupis senescens （Coocconi）, Mytilus galloprovincialis （Lamarck）, Mytilaster lineatus （Gemelin in Linne） and Chlamys glabra. It was found that, in mollusk taxonomy, the elements have unique values. In other words, element concentrations in various mollusk shells depend mainly on the taxonomic characteristics of mollusks. In various bionomic environments different element distributions of the same species are attributed to the different geochemical characters of the each environment. Data obtained in this study indicate that the organisms are the most active and deterministic factors of the environment.     

广州科学城保利林语山庄高边坡支护工程的实践

主要介绍了广州科学城保利林语山庄高边坡支护设计方案与施工方法。支护方案综合采用了锚索、锚杆、抗滑桩、钢管桩、格构梁及挡土墙等多种支护方法，有效地提高了边坡的稳定性。应用有限元方法来验证设计方案的合理性，模拟结果与工程实践基本吻合。     

滑坡治理中格构锚固结构的解析解分析

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中     

单层柱面网壳弹塑性地震反应特征

本文对网壳结构的弹塑性抗震性能进行了探讨。根据结构弹性有限元理论，结合网壳结构受力特点，推导出网壳结构单元的弹塑性矩阵表达式。然后对单层柱面网壳结构的弹塑性地震反应进行了具体分析，给出了节点位移和杆件应力变化规律，并讨论了矢跨比变化对网壳弹塑性性能的影响，从而揭示出这类网壳的弹塑性地震反应特点。     

Application of extended distinct element method with lattice model to collapse analysis of RC bridges

This paper proposes a simple lattice model for collapse analysis of RC bridges subjected to earthquakes by using the extended distinct element method (EDEM). In the model, a concrete element consists of lumped masses connected to one another by springs, and a reinforcement bar is represented by a discrete model or an integrated model. The proposed lattice model is simple but its parameters are reasonably defined. It has fewer element nodes and connecting springs, which will be of benefit by shortening the CPU time. The processes to determine the initial stiffness of concrete and steel springs, the parameters of the constitutive model and the fracture criteria for springs are described. A re‐contact spring model is also proposed to simulate the re‐contact of the concrete after fracture of springs; and a general grid searching method is used to decrease the CPU time for judging re‐contact after fracture. The lattice model is assessed by numerical simulations and experiments. As an application, a damaged single‐column pier subjected to the Kobe Earthquake in 1995 is analysed by EDEM with the proposed model. The simulation results indicate that the proposed model predicts well qualitatively the collapse process of RC bridges. Copyright © 2003 John Wiley & Sons, Ltd.