Pressure-induced incipient amorphization of α-quartz and transition to coesite in an eclogite from Antarctica: a first record and some consequences

Monocrystalline quartz inclusions in garnet and omphacite from various eclogite samples from the Lanterman Range (Northern Victoria Land, Antarctica) have been investigated by cathodoluminescence (CL), Raman spectroscopy and imaging, and in situ X‐ray (XR) microdiffraction using the synchrotron. A few inclusions, with a clear‐to‐opalescent lustre, show ‘anomalous’ Raman spectra characterized by weak α‐quartz modes, the broadening of the main α‐quartz peak at 465 cm^?1, and additional vibrations at 480–485, 520–523 and 608 cm^?1. CL and Raman imaging indicate that this ‘anomalous’α‐quartz occurs as relicts within ordinary α‐quartz, and that it was preserved in the internal parts of small quartz inclusions. XR diffraction circular patterns display irregular and broad α‐quartz spots, some of which show an anomalous d‐spacing tightening of ～2%. They also show some very weak, hazy clouds that have d‐spacing compatible with coesite but not with α‐quartz. Raman spectrometry and XR microdiffraction characterize the anomalies with respect to α‐quartz as (i) a pressure‐induced disordering and incipient amorphization, mainly revealed by the 480–485 and 608‐cm^?1 Raman bands, together with (ii) a lattice densification, evidenced by d‐spacing tightening; (iii) the cryptic development of coesite, 520–523 cm^?1 being the main Raman peak of coesite and (iv) Brazil micro‐twinning. This ‘anomalous’α‐quartz represents the first example of pressure‐induced incipient amorphization of a metastable phase in a crustal rock. This issue is really surprising because pressure‐induced amorphization of metastable α‐quartz, observed in impactites and known to occur between 15 and 32 GPa during ultrahigh‐pressure (UHP) experiments at room temperature, is in principle irrelevant under normal geological P–T conditions. A shock (due to a seism?) or a local overpressure at the inclusion scale (due to expansion mismatch between quartz and its host mineral) seem the only geological mechanisms that can produce such incipient amorphization in crustal rocks. This discovery throws new light on the modality of the quartz‐coesite transition and on the pressure regimes (non‐lithostatic v. lithostatic) during high‐pressure/UHP metamorphism. In particular, incipient amorphization of quartz could favour the quartz‐coesite transition, or allow the growth of metastable coesite, as already experimentally observed.     

利用Lageos 1 SLR资料解算1990-2001年的地球定向参数

利用 12年的Lageos 1卫星激光测距资料 (1990 - 2 0 0 1)解算得到了地球定向参数 (EOP) ,将该序列的结果与同期的EOP(IERS)C0 4进行比较 ,其外符精度为 :极移XP— 0 .4 0mas,YP— 0 .4 2mas ,日长变化Dr— 0 .0 35ms。     

雾化进样石墨炉原子吸收光谱法的研究 Ⅰ.直接雾化进样装置及其性能

介绍一种自行设计和加工的直接雾化石墨炉进样装置的结构、工作原理和操作方法。该装置由微机控制与石墨炉加热程序同步工作,可以实现自动控制和自动测量。对雾化进样石墨炉分析的仪器参数和实验条件进行了研究和选择。结果表明,该装置与石墨炉结合具有自动化程度高、重现性好、样品利用率高和分析速度快等特点。     

伪随机码调制的CW半导体激光雷达试制报告

本文报告一种用半导体激光器作光源,用子脉冲宽度100ns,长度为511的周期伪随机码对半导体激光器的输出作幅度调制;APD作光电检测器,高速数字信号处理器TMS320C25作信号处理的激光雷达组成方案和试作样机的实验结果。     

2001-2002年上海天文台卫星激光测距观测报告

介绍了 2 0 0 1- 2 0 0 2年上海天文台卫星激光测距观测概况和亚厘米级精度的测距实验     

Techniques to measure grain-size distributions of loamy sediments: a comparative study of ten instruments for wet analysis

Ten instruments for measuring the grain‐size distribution of loamy sediments in water were tested in a comparative study. Instruments tested were: the Malvern Mastersizer S, the Coulter LS 200, the Fritsch Analysette 22 (version C), the Horiba Partica LA‐950, the Sedigraph 5100, the Atterberg cylinder, the Coulter Multisizer 3, the CIS‐100, the EyeTech and the image analysis software Histolab. The first four instruments use laser diffraction. The Sedigraph and Atterberg cylinder are based on sedimentation. The Coulter Multisizer 3 uses impedance measurements and the last three instruments use optical techniques. Grain‐size analyses were carried out on four sediments with median grain diameters of approximately 35, 30, 12 and 9 μm, respectively, and with no particles >90 μm. The laser diffraction instruments produced the best results for the various criteria considered in this study, followed by the Coulter Multisizer 3 (electrical sensing zone technique), the sedimentation techniques and the optical methods. However, the study also showed that there is no such thing as an ‘ideal’ method because techniques may score differently according to the criterion tested. An appropriate evaluation thus requires that various criteria be considered. Issues to be taken into account are: type of sediment, quantity of sediment available, speed of measurement, complexity of the measurement protocol, processing of the data, reproducibility of the results and the specific aims of the study undertaken.     

Ultrahigh pressure macro diamonds from Copeton (New South Wales, Australia), based on Raman spectroscopy of inclusions

Mining of Cenozoic alluvial deposits at Copeton and Bingara (Eastern Australia) has produced two million macrodiamonds (0.25 ct median size). Raman spectroscopy is used to identify included minerals within uncut Copeton diamonds, with sealed chamber remnant pressures of 31.7 to 35.6 kbar for coesite, 13.6 and 22.7 kbar for clinopyroxene, and 7.6 kbar for grossular garnet. Assuming elastic behaviour, these values generate inclusion entrapment PT loci which intersect, restricting diamond formation conditions: from 250 °C, 43 kbar to 800 °C, 52 kbar. Larger than error (± 100 °C and ± 4 kbar), this range shows a systematic variation in inclusion composition with diamond zoning and N properties. Published research shows 1) Copeton and Bingara diamonds are unique, and 2) modern alluvium in the Bingara district carries mantle-formed garnet, captured by post-tectonic alkali basalt from an extensive diamondiferous ultrahigh pressure (UHP) terrane that stalled at depth because it is dominated by mafic eclogite. The combined Raman and geological results indicate two sets of subduction UHP diamond formation conditions/protolith are required, firstly cooler oceanic slab and secondly including higher temperature continental crust. The Copeton and Bingara stones are UHP macrodiamonds, and Carboniferous ⁴⁰Ar/³⁹Ar age dates on clinopyroxene inclusions should be interpreted as ages of crystallisation, representing the termination of subduction. The characteristic features of ruptured inclusions and etched percussion marks on Copeton and Bingara diamond indicate volcanic delivery to the earth's surface. Alluvial deposits elsewhere in Eastern Australia may carry similar diamond along with diamond of different origin.     

电感耦合等离子体发射光谱法同时测定玻璃中铝钙铁钾镁钠钛硫

通过选择分析谱线、处理样品方法和消除干扰因素等实验,建立了电感耦合等离子体发射光谱法同时测定玻璃中的Al2O3、CaO、Fe2O3、K2O、MgO、Na2O、TiO2和SO3的方法,克服了利用常规化学法测定玻璃中各氧化物步骤繁琐、耗时长、工作量大的不足。方法的回收率为95.0%~103.0%,精密度(RSD,n=10)为0.20%~1.72%。方法具有快速、简便、线性范围宽等优点,分析误差满足常规化学分析法的要求。用于钠钙硅玻璃及其制品的分析,结果令人满意。     

氢化物发生-原子荧光光谱法直接测定地球化学样品中痕量碲

采用硝酸-氢氟酸-高氯酸溶解样品,以Fe3+作减缓剂,不需分离富集,用氢化物发生-原子荧光光谱法直接测定地球化学样品中痕量碲。对测定介质、KBH4浓度、铁盐的作用等条件进行试验。方法检出限为0.0031μg/g,精密度(RSD,n=11)<6.10%。方法用于国家一级地球化学标准物质中痕量碲的测定,结果与标准值一致。     

纺织品中偶氮染料还原液内芳香胺的电喷雾电离质谱分析

在优化的条件下,用电喷雾电离质谱(ESI-MS)检测了多种纺织品中由偶氮染料还原获得的芳香胺。当毛细管温度为100℃、鞘气流速为25单位、进样流速为10μL/min、电压为5kV时,信号的总离子流强度高且较稳定。实验分析了19种致癌芳香胺标准溶液的二级质谱,获得了相应物质的特征碎片离子;在此基础上,建立了基于ESI-MS对毛巾、棉布等样品中芳香胺进行快速定性分析的方法,具有灵敏度高、特异性好、检测速度快等优点。