Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.     

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.     

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.     

黑龙江哈尔滨白渔泡国家湿地公园沼泽、林地和农田土壤物理、化学和生物性质差异

为了揭示黑龙江哈尔滨白渔泡国家湿地公园沼泽、林地和农田土壤物理、化学和生物性质的差异,于2018年7月25日~8月2日,在湿地公园内,在天然芦苇(Phragmites australis)沼泽、林地、旱田和水田中设置采样地,采集不同深度(0~10 cm、10~20 cm和20~30 cm)的土壤样品,测定土壤样品的物理、化学和生物指标。研究结果表明,白渔泡国家湿地公园不同采样地土壤指标存在差异;与天然芦苇沼泽土壤相比,其它采样地土壤的含水量明显偏低,土壤全氮、全磷、碱解氮和有机质含量都明显偏小,水田土壤速效磷含量偏大;天然芦苇沼泽土壤脲酶、硝酸还原酶、纤维素酶、蛋白酶和β-葡萄糖苷酶活性都高于林地和农田土壤,水田0~10 cm和10~20 cm深度土壤的硝酸还原酶活性显著高于旱田和林地;与天然芦苇沼泽土壤相比,旱田土壤小于0.25 mm的小团聚体含量偏大,而其它采样地土壤的各粒级团聚体的比例变化较小,水田土壤团聚体平均重量直径比天然芦苇沼泽和旱田土壤低。     

BORDER PORT MANZHOULh URBAN FUNCTION AND SPACE DEVELOPMENT

Manzhouli is the largest land port city on the Sino-Russia border, transit cargo through the land port amount-ed to 5.95 million tons, transit tourists were 304 500 in 2000. It stands at the joint place of China, Mongolia and Russi-a, faces to Siberia area of Russia, receives direct support from the Northeast China and Bohai Sea Rim Area, and possess-es priorities in geographical location, land port infrastructure, water resources, coal resources, tourist resources andgreat potentiality in economic cooperation with Russia. The future urban function is a key port on the First Eurasia Continen-tal Bridge. Manzhouli Port will keep its first place between China and Russia land transport, and it is forecasted that thetransit amount through Manzhouli Port will go up to 10 million tons in 2005 and 20 million tons in 2010. It will be construct-ed to be a trade center of the peripheral area extending to Russia and Mongolia, a key export-oriented processing industri-al zone supported by industries such as export processing industries, export agriculture, trade services, technology trad-ing and the other service industries. It keeps being a well-known touring city for trade, shopping, sightseeing, vocation,local food, recreation and cultural events. To build Manzhouli Export Processing Industry Zone will improve city econom-ic structure, and the main sectors are organic food processing, livestock products processing, garment and furniture indus-try. Moreover, Manzhouli Export Processing Industry Zone will eventually be upgraded to be a border free trade zone.The city functional transition will inevitably affect urban spatial restructure and its expansion. The city space transforma-tion will develop as such: one development axis of No. 301 highway paralleling with Bin - Zhou(Harbin - Manzhouli) rail-way which cuts through central part of Manzhouli City, and links Zhalainuocr District with central city; three urban unitsincluding central city, Zhalainuocr District and Manzhouli Interchange Trade Zone; cohesion with Aoerjin and Cuogangpastures; regional dual-nuclei structure of Hailaer City and Manhzouli City; and the Manzhouli-Zabaykalsk Free TradeZone.     

A STUDY ON LAND SYSTEM INNOVATIONS IN THE CONSTRUCTION OF SMALL TOWNS IN CHINA

The economic development in China and the rising of the living standard need to speed up the urbanisa-tion.The development of small towns is an important way to Chinese urbanization.Land use plays a very important role in the development of small towns.However there are many problems in the development of small towns,esp.in land use.The paper first discusses the land problems in the development of small towns.Such as much cultivated land lies idle,under-utilization and waste of land,increasing illegal use of land,unstable contractural relationship for land use.The relationship between the development of small towns and land use is also studied.Then the guidelines for the land system innovations of small towns are put forward.Namely the sustainability of social and economic development,the bal-ance between land reservation and land utilization,the provision of service to village ,agriculture and farmer,the manage-ment of land resource and land assets,the parsimonious andlegal use of land.The basic framework of land system innova-tions of small towns is put forward finally.It include the land replacement policy for small towns and the permanent tenan-cy of farmland,the overall plan for land uses and other plans in harmony,the establishment of a flexible system of land supplies,using land with payments ,the transfer of agricultural land and refining the land law related to the construction of small towns.     

THE POSITION AND ROLES OF PORTS AND RAILWAYS IN THE EURASIA LAND BRIDGE TRANSPORTATION IN NORTHEAST CHINA

This paper systematically analyzes and proves the favorable factors of utilizing the ports and the railways in Northeast China for the Asia-Europe land bridge transportation. It will be more beneficial to Dalian Port and HaDa (Harbin-Dalian) and Binzhou (Harbin-Manzhouli) railways in Northeast China to the Siberia railway in Russia than 1) to other ports and the corresponding railways in China, 2) to the Nakhodka Port in Russia and the corresponding railways and 3) to the Chongjin Port in North Korea and the corresponding railways. This paper also puts forward the reform measures to adopt the ports and the railways in the northeast region in China for the land bridge transportation and the problems in transportation policies and management systems.     

Smeared crack approach: back to the original track

This paper briefly reviews the formulations used over the last 40 years for the solution of problems involving tensile cracking, with both the discrete and the smeared crack approaches. The paper focuses on the smeared approach, identifying as its main drawbacks the observed mesh‐size and mesh‐bias spurious dependence when the method is applied ‘straightly’. A simple isotropic local damage constitutive model is considered, and the (exponential) softening modulus is regularized according to the material fracture energy and the element size. The continuum and discrete mechanical problems corresponding to both the weak discontinuity (smeared cracks) and the strong discontinuity (discrete cracks) approaches are analysed and the question of propagation of the strain localization band (crack) is identified as the main difficulty to be overcome in the numerical procedure. A tracking technique is used to ensure stability of the solution, attaining the necessary convergence properties of the corresponding discrete finite element formulation. Numerical examples show that the formulation derived is stable and remarkably robust. As a consequence, the results obtained do not suffer from spurious mesh‐size or mesh‐bias dependence, comparing very favourably with those obtained with other fracture and continuum mechanics approaches. Copyright © 2006 John Wiley & Sons, Ltd.     

GRADATION AND ASSESSMENT OF DAMAGE DEGREE OF NATURAL LANDSCAPE IN XING, AN COUNTY, GUANGXI

A new technique designed to help quantify the degree of damage to the landscape from one area to another shows a close relationship between population density and the degree of landscape damage. The technique establishes a scale of damage from 0 to 5 (zero = no damage; 5 = severe damage) using data from aerial photographs, land-use maps, and field data. The related formula allows one to compare the relative degree of damage across regions using a combination of an absolute index, a theoretical index, a relative index, and population density. Xing'an County is used to demonstrate the technique.     

Reliability assessment of granular filters in embankment dams

Empirical criteria have been used successfully to design filters of most embankment large dam projects throughout the world. However, these empirical rules are only applicable to a particular range of soils tested in laboratory and do not take into account the variability of the base material and filter particle sizes. In addition, it is widely accepted that the safety of fill dams is mainly dependent on the reliability of their filter performance. The work herein presented consists in a new general method for assessing the probability of fulfilling any empirical filter design criteria accounting for base and filter heterogeneity by means of first‐order reliability methods (FORM), so that reliability indexes and probabilities of fulfilling any particular criteria are obtained. This method will allow engineers to estimate the safety of existing filters in terms of probability of fulfilling their design criteria and might also be used as a decision tool on sampling needs and material size tolerances during construction. In addition, sensitivity analysis makes possible to analyse how reliabilities are influenced by different sources of input data. Finally, in case of a portfolio risk assessment, this method will allow engineers to compare the safety of several existing dams in order to prioritize safety investments and it is expected to be a very useful tool to evaluate probabilities of failure due to internal erosion. Copyright © 2006 John Wiley & Sons, Ltd.