无规取向、无吸收非球形粒子光散射的T-矩阵方法

较详细地研究了无规取向、无吸收椭球体粒子的T－矩阵收敛问题。首先，简要概括了nmax的3种收敛方案和它们的基本特性。然后，应用1993年提出的数学收敛方法（M－方法）和1998年提出和物理收敛方法（P－方法）研究收敛问题。结果表明椭球粒子收敛精度对粒子的尺度参数，纵横比以及椭球体的种类（例如，长／扁椭球）有很强的依赖性。当粒子的尺度参数不太大时，甚至在极端纵横比的条件下，P－收敛方案优于M－收敛方案。     

复杂模型重力位场快速正反演方法及应用

提要 本文详细讨论了一种三维重力位场快速正反演方法。作者在前人工作的基础上,对算法作了行之有效的改进,通过对反演中的不稳定因素进行各种理论模型试算,得出保证迭代反演稳定收敛的准则,编制出可在微型机IBM—PC上运行的人机对话式自动正反演程序。本文还对各种不均质模型进行了模似计算并将该方法应用于某含油气沉积盆地的双层界面构造研究,揭示出了储油有利地段。     

隶属函数的方法进行等级预报及隶属函数的构造

模糊数学在气象、水文预报领域中已经得到广泛的应用。其中，用隶属函数的方法作预报对象的多等级长期预报，能取得较好的效果。本文简要介绍用隶属函数的方法进行长期多等级预报的基本思路和步骤，重点介绍在作上述预报过程中，构造隶属函数的一种方法。     

关于GAOR、GSSOR的特征值关系式

对两种广义迭代方法ＧＡＯＲ和ＧＳＳＯＲ分别导出了其迭代矩阵和Ｊａｃｏｂｉ迭代矩阵的特征值之间的关系式，这些结果推广了已有的结果     

城市综合地下管线普查全过程监理技术方法

针对城市综合地下管线普查全过程监理的应用问题,着重探讨全过程监理的总体思路、组织架构与制度保障,进而给出地下管线普查各阶段监理的技术方法与实施要点。     

Numerical simulation of a stratigraphic model

A multi-lithology diffusive stratigraphic model is considered, which simulates at large scales in space and time the infill of sedimentary basins governed by the interaction between tectonics displacements, eustatic variations, sediment supply, and sediment transport laws. The model accounts for the mass conservation of each sediment lithology resulting in a mixed parabolic, hyperbolic system of partial differential equations (PDEs) for the lithology concentrations and the sediment thickness. It also takes into account a limit on the rock alteration velocity modeled as a unilaterality constraint. To obtain a robust, fast, and accurate simulation, fully and semi-implicit finite volume discre tization schemes are derived for which the existence of stable solutions is proved. Then, the set of nonlinear equations is solved using a Newton algorithm adapted to the unilaterality constraint, and preconditioning strategies are defined for the solution of the linear system at each Newton iteration. They are based on an algebraic approximate decoupling of the sediment thickness and the concentration variables as well as on a proper preconditioning of each variable. These algorithms are studied and compared in terms of robustness, scalability, and efficiency on two real basin test cases.     

基于ICCP算法的重力辅助惯性导航

迭代最近等值线算法(ICCP)是一种重要的匹配导航算法,文中首先介绍ICCP算法的基本原理,随后在0.2′×0.2′重力异常数据库的基础上,利用ICCP算法进行仿真计算得到最佳匹配位置。最后为了验证匹配位置是否可用于修正惯导误差,提出将匹配位置误差作为观测量,用卡尔曼滤波对惯导系统误差进行最优估计。由最后的仿真结果可以看出,ICCP算法可有效抑制惯导纬度误差的增长,且最大纬度误差不超过2,′以匹配位置误差作为观测量可以用来估计惯导方位误差角。     

迭代折射静校正技术在鄂北地震资料处理中的应用

在低速层速度(地表直达波)已知的条件下,利用生产炮初至信息,用加权最小平方法和共轭梯度法建立的折射静校正数学模型,迭代求取长波长、短波长静校正量,在解决鄂尔多斯盆地北部的虚假小幅度构造问题及改善剖面质量方面取得了明显的效果。     

基于GM(1,1)优化模型的岩石边坡变形预报

岩石边坡系统是一典型灰色系统，其变形发展过程可以用灰色预测模型完成。尽管传统GM（1，1）模型预测有很多成功的实例，但是也存在一些预测偏差过大的情况，必须对其进行优化。逐步迭代法GM（1，1）模型不仅收敛速度快，而且与原始数据库序列的凹凸性保护一致。利用自编的计算程序对马步坎边坡预测测点G1沉降和开裂进行预测分析，结果表明逐步迭代法GM（1，1）优化模型计算精度较传统GM（1，1）模型和背景构造法GM（1，1）优化模型高，较好地反映了岩石边坡的变形趋势。     

Recent developments in seismically isolated buildings in Japan

The Building Standard Law of Japan and related Enforcement Order and Notifications have been substantially revised since the year 2000 to introduce a performance-based regulatory and deregulation system for building control systems. Up to then, time-history analyses were mandatory for isolated buildings and had to be specially approved by the Minster of the Ministry of Construction (MOC). Simplified design procedures based on the equivalent linear method for seismically isolated buildings have been issued as “Notification 2009 — Structural calculation procedure for buildings with seismic isolation” from MOC, and are now integrated into the Ministry of Land, Infrastructure, and Transportation (MLIT). Along with Notification 2009, “Notification 1446 of year 2000 — Standard for specifications and test methods for seismic isolation devices” was also issued. Buildings with heights equal to or less than 60m and that are designed according to these Notifications, including base isolated buildings, only need approval from local building officials, and no longer require the special approval of the Minister of MLIT. This paper summarizes: 1) some statistics related to buildings with seismic isolation completed up to the end of 2001; 2) simplified design procedures required by Notification 2009 of year 2000; and 3) performance of seismic isolation devices required by Notification 1446 of year 2000.