Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

钱二块铀矿床采铀注液结垢趋势的理论分析与预测

用离子系数矩阵法对钱二块铀矿床地浸采铀试验注液中存在的独立离子反应进行了确定,由溶度积规则及反应平衡原理,借助Matlab编程,估算出了钱二块铀矿床地浸采铀试验注液可能会生成的沉淀物种类及数量,为防治结垢提供了一定的理论依据.     

辽东湾S2冰侧限剪切强度的试验研究

利用试验方法系统地研究了辽东湾S2型海冰侧限剪切强度随剪切应变速率、加载方向、法向应力、温度和冰内孔隙率的变化规律。介绍了S2型海冰各向异性特点及剪切应变速率对剪切破坏方式的效应和韧脆破坏转变的条件。分析了不同加载方向海冰峰值剪切强度的差异 ,获得 - 6 2℃温度下S2冰内摩擦角和内聚力分别为 42°和 70 0kPa。利用统计分析给出峰值剪切强度与冰温和孔隙率的试验关系     

利用归一化层速度预测和研究储层物性的方法

归一化层速度是对任意深度处的层速度进行归一化处理的一种速度形式，归一化处理的目的是把任意深度处的层速度转换为与深度无关的格式，归一化后层速度的横向变化主要取决于地层岩性，孔隙度等物性的变化，利用这一特点可以方便地利用已知钻井资料对其进行标定，比较简单地进行地层岩性，孔隙度等特性的预测。实际应用表明，其预测结果与钻井揭示吻合较好，预测效果令人满意。     

New basis for the constitutive modelling of aggregated soils

Natural and compacted soils are usually characterized by aggregation of particles. The mechanical behaviour of these materials depends on soil structure. The oedometric compression tests performed on aggregated samples presented here showed that these materials exhibit a yield limit depending not only on stress history and stress state but also on soil structure. Evidence is provided using the neutron tomography technique. These results revealed that soil structure modification occurs together with plastic deformations. The experimental results are used to propose a new state parameter to quantify the soil structure. Based on pore-scale experimental observations, an evolution law for this parameter is proposed as a function of associated plastic strains. Considering both soil fabric and inter-particle bonding effects, a new yield limit depending on stress state, stress history and soil structure is introduced for the aggregated soils. Accordingly, a new constitutive framework consistent with strain hardening plasticity is proposed to consider soil structure effects in the modelling of aggregated soils.     

台北凹陷中浅储集层孔隙预测及勘探有效下限探讨

在系统研究储层物性控制因素的基础上，分析台北凹陷中浅储集层物性分布规律以及压实程度特征，建立孔隙度一深度趋势法和压实减孔量法预测砂岩孔隙度．认为中侏罗统储层压实减孔量整体比较高，表现出“北高南低，生油凹陷内高、周边低”的特征．结合探井试油资料，确定侏罗系储集层有效下限的孔隙度值为9％，压实减孔量为34％，各构造带侏罗系储层深度有效下限总体上表现出“南深北浅、西深东浅”的特征．指出台北凹陷侏罗系储集层在有效下限以下勘探具有较大风险．     

塔里木盆地阿克库勒地区石炭系卡拉沙依组成岩作用

阿克库勒地区卡拉沙依组碎屑岩储层的成分成熟度和结构成熟度均较低．储层的次生溶蚀孔隙所占比例远高了：原生孔隙，次生孔隙是储层的主要储集空间．样品数据统计显示，卡拉沙依组储层属于低孔、低渗储层类型．根据岩石薄片、铸体薄片观察及储层样品的扫描电镜和阴极发光分析结果，本区石炭系储层主要经历的成岩作用有压实（压溶）作用、胶结作用、溶蚀作用和交代作用，其中碳酸盐矿物的沉淀和溶蚀作用是本区卡拉沙依组储层所经历的最重要的成岩作用．成岩作用已达到晚成岩B期，早期方解石交代石英颗粒并发生大量溶蚀，生成大量次生孔隙，晚期方解石没有发生溶蚀．     

一种新的储层孔隙成因类型--石英溶解型次生孔隙

石英作为碎屑岩储层中的一种难溶组分,普遍认为它和次生孔隙的形成关系不十分密切。研究认为泌阳凹陷核桃园组储层中的碎屑石英颗粒存在明显的溶解现象,并形成以石英直接溶解型孔隙为主的储集空间特征。石英颗粒被溶解的部分在薄片中所占的范围为 2 %～ 7%者常见,高者达 8%以上,在总孔隙中所占的相对含量也多数在10 %～ 35 %之间,早成岩B期是其最主要形成期。石英溶解型次生孔隙的大量存在为碎屑岩储层中SiO₂ 胶结物及次生孔隙成因等问题的解释以及储层预测和评价提供了新的可能性。     

土壤离子电导率测量在可地浸砂岩铀矿找矿勘查中的实验研究

土壤离子电导率测量是隐伏金属矿床、贵金属矿床普查找矿的重要技术方法,本研究应用该方法对隐伏可地浸砂岩铀矿进行普查找矿实验研究。实验表明,本区土壤离子电导率背景值为22.91μs/cm,异常平均值为513.96μs/cm,最高异常值达1349.30μs/cm。它可以圈定舌状蚀变砂岩体与未蚀变砂岩的接触边界,从而可以圈定隐伏砂岩铀矿的产出位置,是隐伏可地浸砂岩铀矿普查找矿的既经济又有效的方法。     

A high-resolution diatom reconstruction between 21,000 and 17,4000 14C yr BP from the southern Bolivian Altiplano (18–23°S)

A diatom study of lacustrine sediments in the southern part of the Bolivian Altiplano (Salar of Coipasa) provides a continuous record of the period 21,000–17,500 ¹⁴C yr BP. Constrained by seven AMS ¹⁴C dates, this record provides evidence that the Coipasa basin was filled by a shallow body of water during this time. Diatom/salinity and diatom/ionic composition transfer functions indicate that the lake was saline, dominated by sodium-chloride throughout all the period.A comparison with regional data shows that Lake Titicaca could not have overflowed towards the southern Bolivian Altiplano at that time. As this dry phase was not registered in Lake Coipasa, this lake was probably supplied by winter precipitation originating from the Pacific. But, recent data from the deep basin of Lake Titicaca show that the lake-level was higher during this time interval, and the question arises whether precipitation from Atlantic and Amazonia sources could have played an important role on the Altiplano during the Last Glacial Maximum (LGM). This hypothesis needs to match other available paleoclimatic data from the lowlands of tropical South America, where there is evidence that during the LGM, conditions were drier than today. Global climate simulations suggest a positive P-E on the Altiplano, due to a strong cooling, reducing evaporative demand more than any increase in precipitations. An increase of winter precipitation from the Pacific is in agreement with data from the Chilean coast showing a northward locations of the Westerlies during the LGM. This paleoclimatic hypothesis is also in agreement with a coupled ocean-atmosphere model, which indicates weaker summer precipitation and stronger winter precipitation in the tropical areas.