Jurassic Tectonics of North China: A Synthetic View

This paper gives a synthetic view on the Jurassic tectonics of North China, with an attempt to propose a framework for the stepwise tectonic evolution history. Jurassic sedimentation, deformation and magmatism in North China have been divided into three stages. The earliest Jurassic is marked by a period of magmatism quiescence （in 205-190 Ma） and regional uplift, which are considered to be the continuation of the “Indosinian movement” characterized by continent-continent collision between the North and South China blocks. The Early to Middle Jurassic （in 190-170 Ma） was predominated by weak lithospheric extension expressed by mantle-derived plutonism and volcanism along the Yanshan belt and alongside the Tan-Lu fault zone, normal faulting and graben formation along the Yinshan- Yanshan tectonic belt, depression and resuming of coal-bearing sedimentation in vast regions of the North China block （NCB）. The Middle to Late Jurassic stage started at 165y.5 Ma and ended up before 136 Ma; it was dominated by intensive intraplate deformation resulting from multi-directional compressions. Two major deformation events have been identified. One is marked by stratigraphic unconformity beneath the thick Upper Jurassic molasic series in the foreland zones of the western Ordos thrust-fold belt and along the Yinshan-Yanshan belt; it was predated 160 Ma. The other one is indicated by stratigraphic unconformity at the base of the Lower Cretaceous and predated 135 Ma. During this last stage, two latitudinal tectonic belts, the Yinshan-Yanshan belt in the north and the Qinling-Dabie belt in the south, and the western margin of the Ordos basin were all activated by thrusting; the NCB itself was deformed by the NE to NNE-trending structural system involving thrusting, associated folding and sinistral strike-slip faulting, which were spatially partitioned. Foliated S-type granitic plutons aged 160-150 Ma were massively emplaced in the Jiao-Liao massif east of the Tan-Lu fault zone and indicate important crustal thicken     

造山作用概念和分类

本文从造山作用的特征标志出发讨论了Sengor造山带定义的缺陷， 总结了造山作用的六条特征标志，并给出了造山作用新的定义。该定义包括了造山作用的起因、特征标志和大地构造背景。评述了造山带陆内、陆缘、陆间三分法方案的不足之处和剪压造山带的单独设类问题，提出了造山带板内、俯冲、碰撞三分方案。针对碰撞造山带，笔者在总结探讨现有分类方案的优点的基础上， 提出碰撞造山带陆陆碰撞、碰撞增生、弧陆碰撞和无大陆型碰撞造山带四分法方案，其中无大陆型碰撞造山带是描述陆壳物质形成初期计体拼合聚合过程的新类型。     

3D shear-wave velocity structure of the Eifel plume, Germany

The Quaternary Eifel volcanic fields, situated on the Rhenish Massif in Germany, are the focus of a major interdisciplinary project. The aim is a detailed study of the crustal and mantle structure of the intraplate volcanic fields and their deep origin. Recent results from a teleseismic P-wave tomography study reveal a deep low-velocity structure which we infer to be a plume in the upper mantle underneath the volcanic area [J.R.R. Ritter et al., Earth Planet. Sci. Lett. 186 (2001) 7-14]. Here we present a travel-time investigation of 5038 teleseismic shear-wave arrivals in the same region. First, the transverse (T) and radial (R) component travel-time residuals are treated separately to identify possible effects of seismic anisotropy. A comparison of 2044 T- and 2994 R-component residuals demonstrates that anisotropy does not cause any first-order travel-time effects. The data sets reveal a deep-seated low-velocity anomaly beneath the volcanic region, causing a delay for teleseismic shear waves of about 3 s. Using 3773 combined R- and T-component residuals, an isotropic non-linear inversion is calculated. The tomographic images reveal a prominent S-wave velocity reduction in the upper mantle underneath the Eifel region. The anomaly extends down to at least 400 km depth. The velocity contrast to the surrounding mantle is depth-dependent (from −5% at 31-100 km depth to at least −1% at 400 km depth). At about 170-240 km depth the anomaly is nearly absent. The resolution of the data is sufficient to recover the described features, however the anomaly in the lower asthenosphere is underestimated due to smearing and damping. The main anomaly is similar to the P-wave model except the latter lacks the ‘hole’ near 200 km depth, and both are consistent with an upper mantle plume structure. For plausible anhydrous plume material in the uppermost 100 km of the mantle, an excess temperature as great as 200-300 K is estimated from the seismic anomaly. However, 1% partial melt reduces the required temperature anomaly to about 100 K. The temperature anomaly associated with the deeper part of the plume (250 to about 450 km depth) is at least 70 K. However, this estimate is quite uncertain, because the amplitude of the shear-wave anomaly may be larger than the modelled one. Another possibility is water in the upwelling material. The gap at 170-240 km depth could arise from an increase of the shear modulus caused by dehydration processes which would not affect P-wave velocities as much. An interaction of temperature and compositional variations, including melt and possibly water, makes it difficult to differentiate quantitatively between the causes of the deep-seated low-velocity anomaly.     

藏北新生代两套钾玄质火山岩系列地球化学特征

岩石学和元素地球化学特征研究表明，藏北新生代自南向北沿可可西里岩带和喀喇昆仑—玉门岩带出露有两套钾玄质系列火山岩。它们富集大离子亲石元素(LILE)和轻稀土(LREE)及明显亏损Nb—Ta—Ti，同时具有板内和岛弧(陆弧)的双重特征。源区来源于可能与俯冲带流体有关的相似交代富集地幔，成岩过程主要经历了低度(＜10％)辉石分离结晶作用，同时，源区伴有地壳物质的混染作用。     

中国大陆西部及邻区板内8级大地震活动过程和趋势预测初步研究

中国大陆西部及邻区是全球 8级大地震最为活跃的地区之一。自 180 0年以来该区板内 8级大地震共发生了 16次 ,2 0 0 1年昆仑山口西 8.1级大地震 (36 .1°N ,90 .9°E)是在 195 7年蒙古 8.3级大地震之后 4 4a发生的。研究表明该区 8级大地震的活动过程可能存在相对平静 (1812— 190 2年 )和相对活跃 (190 3— 195 7年 )交替的幕式或轮回过程的性质。 195 7年蒙古地震之后可能是一次新的轮回开始 ,2 0 0 1年昆仑山口西地震是新轮回的第二次地震 ,按照轮回过程中事件发生频度是时间的指数函数关系的假定 ,该区下一次 8级大地震可能约在 2 0 2 6年发生。如果假定该过程相当接近泊松过程。那么 ,在 2 0 0 5 ,2 0 10年和 2 0 15年前至少发生一次 8级大地震的泊松概率 ,分别是 0 .2 9,0 .5 3和 0 .70。     

Seismic Hazard Studies in the U.K.: Source Specification Problems of Intraplate Seismicity

Although the U.K. is in an area of only low to moderate seismicity, the seismic hazard is sufficient to pose a threat to sensitive structures such as chemical plants and nuclear facilities. In quantifying the level of hazard by conventional probabilistic methodology, however, some problems arise in attempting to interpret earthquake data in terms of geological structure and faults. In the U.K., not only is it impossible to identify any demonstrably active faults, but also it is extremely difficult to discern any relationship between the pattern of seismicity and local or regional geological structure.This study discusses the use of two zonation approaches which complement each other in such a way that the general character and trend of seismicity is preserved. In one approach, the zonation is informed by the structural geology, where possible; geological zonation is avoided if it produces sources with heterogeneous seismicity. In the other approach, the record of past earthquakes is divided up into very small zones around individual epicentres or groups of epicentres, the size of each zone usually being proportional to the uncertainty in the epicentral determination of the appropriate event. This zonation preserves an observed tendency of some British earthquakes to repeat themselves. It is suggested that, in intraplate areas such as the U.K., it is often inappropriate to attempt to model individual fault sources. No faults in the U.K. are provably active. Because an earthquake of moderate size can occur on a very short fault segment, it is impractical to restrict fault modelling to major features. Even the two largest U.K. faults, suspected to be active, pose problems in attributing historical seismicity to them as distinct features.     

Metallogenic model of the copper deposit

The copper deposits in the mid-lower reaches of the Changjiang River consist mainly of porphyry, skarn and massive sulphide deposits. According to the geological background, the types of ore deposits and the mineralization, the metallogenic model of the copper deposits is discussed. It is pointed out that the ore-forming hydrothermal fluids came mainly from magmatic water and were related to the intermediate-acid intrusions, and that the formation of skarn arid massive sulphide deposits coincided with the mineralization of porphyry deposits. Project supported by Doctorate Foundation of the State Education Commission of China.     

矿产开发与环境保护

通过国内多个矿区实例，较系统地叙述了矿产资源开发导致的生态环境破坏和污染状况。表明矿产开发中对环境污染的途径包括河流、土壤、等。最后简要介绍了国内、国外几种对采矿污染比较有效的防治措施。     

南太行山闪长岩的SHRIMP锆石U-Pb年龄及岩石成因研究

南太行山符山和东冶角闪闪长岩岩体的精细SHRIMP锆石U-Pb定年和元素-同位素地球化学研究表明:符山角闪闪长岩体形成于126.7±1.1Ma,东冶角闪闪长岩体形成于125.9±0.9Ma,与区内基性侵入岩和北太行地区侵入杂岩具有相似的形成年龄,表明晚中生代(±130Ma左右)太行山地区经历了与华北陆块同期的重要构造岩浆事件。区内闪长质岩石SiO_2=54.84％～65.75％,MgO=1.31％～3.89％,K_2O Na_2O=6.53％～11.40％,mg值=0.36～0.58,(La/Yb)_(cn)=9.86～22.77,(Gd/Yb)_(cn)=1.51～2.00;Eu/Eu=1.00～1.23,以富集LREE、LILE元素和明显亏损Nb-Ta、Zr-Hf-Ti等高场强元素为特征。~(87)Sr/~(86)Sr(t)=0.705363～0.706165,ε_(Nd)(t)=-13.8～-16.8,源自于EMI型富集岩石圈地幔,可解释为新生地幔底侵物质熔融后经过结晶分异作用的产物。与华北克拉通内部其他地区一样,早白垩世南太行山地区处于软流圈上涌的岩石圈伸展构造背景。