Fluid infiltration during contact metamorphism of interbedded marble and calc-silicate hornfels, Twin Lakes area, central Sierra Nevada, California

Abstract In the Twin Lakes area, central Sierra Nevada, California, most contact metamorphosed marbles contain calcite + dolomite + forsterite ± diopside ± phlogopite ± tremolite, and most calc-silicate hornfelses contain calcite + diopside + wollastonite + quartz ± anorthite ± K-feldspar ± grossular ± titanite. Mineral-fluid equilibria involving calcite + dolomite + tremolite + diopside + forsterite in two marble samples and wollastonite + anorthite + quartz + grossular in three hornfels samples record P± 3 kbar and T± 630° C. Various isobaric univariant assemblages record CO₂-H₂O fluid compositions of χCO₂= 0.61–0.74 in the marbles and χCO₂= 0.11 in the hornfelses. Assuming a siliceous dolomitic limestone protolith consisting of dolomite + quartz ° Calcite ± K-feldspar ± muscovite ± rutile, all plausible prograde reaction pathways were deduced for marble and hornfels on isobaric T-XCO₂ diagrams in the model system K₂O-CaO-MgO-Al₂O₃-SiO₂-H₂O-CO₂. Progress of the prograde reactions was estimated from measured modes and mass-balance calculations. Time-integrated fluxes of reactive fluid which infiltrated samples were computed for a temperature gradient of 150 °C/km along the fluid flow path, calculated fluid compositions, and estimated reaction progress using the mass-continuity equation. Marbles and hornfelses record values in the range 0.1–3.6 × 10⁴ cm³/cm² and 4.8–12.9 × 10⁴ cm³/cm², respectively. For an estimated duration of metamorphism of 10⁵ years, average in situ metamorphic rock permeabilities, calculated from Darcy's Law, are 0.1–8 × 10^?6 D in the marbles and 10–27 × 10^?6 D in the hornfelses. Reactive metamorphic fluids flowed up-temperature, and were preferentially channellized in hornfelses relative to the marbles. These results appear to give a general characterization of hydrothermal activity during contact metamorphism of small pendants and screens (dimensions ± 1 km or less) associated with emplacement of the Sierra Nevada batholith.     

Contribution of storms to groundwater recharge in the semi‐arid region of Karnataka,India

This paper describes the application of environmental isotopes and injected tracer techniques in estimating the contribution of storms as well as annual precipitation to groundwater recharge and its circulation, in the semi‐arid region of Bagepalli, Kolar district, Karnataka. Environmental isotopes ²H, ¹⁸O and ³H were used to study the effect of storms on the hydrological system, and an isotope balance was used to compute the contribution of a storm component to the groundwater. Some of the groundwater samples collected during the post‐storm periods were highly depleted in stable isotope content with higher deuterium excess relative to groundwater from the pre‐storm periods. Significant variation in deuterium excess in groundwater from the same area, collected in two different periods, indicates the different origin of air masses. The estimated recharge component of a storm event of 600 mm to the groundwater was found to be in the range of 117–165 mm. There was no significant variation in environmental tritium content of post‐storm and pre‐storm groundwater, indicating the fast circulation of groundwater in the system. After completion of the environmental isotope work, an injected radiotracer ³H technique was applied to estimate the direct recharge of total precipitation to the groundwater. The estimated recharge to the groundwater is 33 mm of the 550 mm annual precipitation during 1992. Copyright © 2003 John Wiley & Sons, Ltd.     

Screening of polymers on selected Hawaii soils for erosion reduction and particle settling

In recent years, high‐molecular‐weight anionic polyacrylamides (PAMs) have been tested on a variety of soils, primarily in temperate climates. However, little information is available regarding the effectiveness of PAM for preventing soil loss through runoff in tropical settings. Screening tests were performed using three negatively charged PAMs and one positively charged PAM on five Hawaii soils (two Oxisols, one Vertisol, and two Aridisols) to determine erosion loss, sediment settling, and aggregate stability. A laboratory‐scale rainfall simulator was used to apply erosive rainfall at intensities from 5 to 8·5 cm h^?1 at various PAM doses applied in both dry and solution forms. Soil detachment due to splash and runoff, as well as the runoff and percolate water volumes, were measured for initial and successive storms. The impact of PAM on particle settling and aggregate stability was also evaluated for selected soil‐treatment combinations. Among the PAMs, Superfloc A‐836 was most effective, and significantly reduced runoff and splash sediment loss for the Wahiawa Oxisol and Pakini Andisol at rates varying between 10 and 50 kg ha^?1. Reduced runoff and splash sediment loss were also noted for PAM Aerotil‐D when applied in solution form to the Wahiawa Oxisol. Significant reductions in soil loss were not noted for either the Lualualei Vertisol or the Holomua Oxisol. It is believed that the high montmorillonite content of the Lualualei Vertisol and the low cation‐exchange capacity of the Holomua Oxisol diminished the effectiveness of the various PAMs tested. The polymers were also found to enhance sediment settling of all soils and helped improve their aggregate stability. This screening study shows the potential use of PAM for tropical soils for applications such as infiltration enhancement, runoff reduction, and enhanced sedimentation of detention ponds. Copyright © 2005 John Wiley & Sons, Ltd.     

Analytical solutions of one‐dimensional infiltration before and after ponding

This paper is a continuation of previous research, which obtained a convenient solution for arbitrary surface fluxes before ponding. By means of Fourier Transformation this has been extended to derive analytical solutions of a linearized Richards' equation for arbitrary input fluxes after surface saturation. Copyright © 2003 John Wiley & Sons, Ltd.     

Groundwater resources in the Jabal Al Hass region,northwest Syria: an assessment of past use and future potential

In many cases, the development of groundwater resources to boost agricultural production in dry areas has led to a continuous decline in groundwater levels; this has called into question the sustainability of such exploitation. In developing countries, limited budgets and scarce hydrological data often do not allow groundwater resources to be assessed through groundwater modeling. A case study is presented of a low-cost water-balance approach to groundwater resource assessments in a 1,550 km² semi-arid region in northwestern Syria. The past development of irrigated agriculture and its effect on the groundwater system were studied by analysis of Landsat images and long-term groundwater level changes, respectively. All components of the groundwater balance were determined. Groundwater recharge was estimated using the chloride mass balance method. Over the past three decades, groundwater levels have declined, on average, 23 m, coinciding with a two-fold increase in the groundwater-irrigated area. Groundwater resources are currently depleted by a value that lies between 9.5×10⁶ and 118×10⁶ m³ year^?1, which is larger than can be compensated for by a future decrease in natural discharge or changes in boundary conditions. However, groundwater resources are likely to be sufficient to supply domestic and livestock needs in the area.     

Determination of specific yield using a water balance approach – case study of Torla Odha watershed in the Deccan Trap province, Maharastra State, India

Specific yield is an essential parameter for any groundwater management plan. Volumetric analysis in the domain of groundwater budgeting for the non-monsoon months has been undertaken for a typical watershed of the Deccan basalt province. The Torla Odha watershed covers an area of over 22 km² on a third-order tributary of the westerly flowing Bhima River. The watershed receives a normal annual rainfall of 643 mm. The entire water demand is supplied by dug wells, which penetrate a shallow aquifer. The specific yield was estimated by comparing the monthly net volume of water removed from the aquifer, with the volume of aquifer de-saturated, based on monthly water level data. The estimated specific yield ranges from 0.0019 in May to 0.0173 in November with an average value of 0.0093. A correlation of the groundwater levels with the detailed geology suggests that the higher specific yield value (0.017) corresponds to dewatering of the weathered zone within the shallow aquifer. The specific yield of the massive basalt immediately below the weathered zone varies from 0.0089 to 0.0103. The underlying vesicular basalt, which is dissected by sheet joints, has a relatively higher specific yield (0.0121). The massive basalt, which forms the base of the shallow aquifer system, has a lower specific yield from 0.0019 to 0.0022.

---

Résumé Le débit spécifique est un paramètre essentiel pour tout plan de gestion des eaux souterraines. Les analyses volumétriques, dans le cadre des bilans hydriques des eaux en dehors des mois de mousson, ont été entreprises pour un bassin-versant typique de la province basaltique du Deccan. Le bassin-versant du Torla Odha couvre une superficie de 22 km², et alimente l’affluent du troisième ordre de la rivière Bhima, qui coule vers l’Ouest. La pluviométrie annuelle atteint 643 mm. Toute la demande en eau es assurée par des puits foncés pénétrant dans l’aquifère phréatique. Le débit spécifique a été estimé en comparant le volume net mensuel d’eau captée dans l’aquifère, avec le volume de l’aquifère dé-saturé, basé sur les données des niveaux piézométriques mensuels. Le débit spécifique estimé s’étend entre 0,0019 en Mai et 0.173 en Novembre; la moyenne se situe à 0,0093. Une corrélation entre les niveaux des eaux souterraines et la géologie, suggère que les débits spécifiques les plus importants (0,017) correspondent aux zones altérées de l’aquifère phréatique. Le débit spécifique du massif basaltique, immédiatement sous la zone altérée, varie entre 0,0089 et 0,0103. Le basalte vésiculaire, situé juste en dessous et traversé par des diaclases parallèles, possède un débit spécifique sensiblement plus élevé (0,0121). Le basalte massif, qui forme la base de l’aquifère phréatique, possède un débit spécifique moins important, compris entre 0,0019 et 0,0022.

---

Resumen El rendimiento específico es un parámetro esencial para cualquier plan de manejo de aguas subterráneas. Se ha llevado a cabo el análisis volumétrico, en el entorno de balance de aguas subterráneas, para los meses sin monzón de una cuenca típica de la provincia de basaltos Deccan. La cuenca Rorla Odha cubre un área de 22 km² en un tributario de tercer orden del Río Bhima que fluye al oeste. La cuenca capta una lluvia anual normal de 643 mm. La totalidad de la demanda de agua es abastecida por pozos manuales que penetran un acuífero somero. Se estimó el rendimiento específico al comparar el volumen neto mensual de agua removido del acuífero con el volumen de agua de-saturado estimado a partir de datos de niveles de agua mensuales. Los valores estimados de rendimiento específico varían de 0.0019 en mayo a 0.0173 en noviembre con un valor promedio de 0.0093. La correlación de niveles de agua subterránea con la geología de detalle sugieren que el valor más alto (0.017) de rendimiento específico corresponden con el desaguado de la zona de intemperismo dentro del acuífero somero. El rendimiento específico del basalto masivo que se encuentra inmediatamente debajo de la zona de intemperismo varía de 0.0089 a 0.0103. El basalto vesicular subyacente, el cual está disectado por fracturas laminares, tiene un rendimiento específico relativamente más alto (0.0121). El basalto masivo, que forma la base del sistema de acuífero somero, tiene un rendimiento específico más bajo el cual varía de 0.0019 a 0.0022. Palabras clave: basalto Deccan. India. Rendimiento específico. Recarga de agua subterránea. Balance hídrico.

     

Identifying and quantifying urban recharge: a review

The sources of and pathways for groundwater recharge in urban areas are more numerous and complex than in rural environments. Buildings, roads, and other surface infrastructure combine with man-made drainage networks to change the pathways for precipitation. Some direct recharge is lost, but additional recharge can occur from storm drainage systems. Large amounts of water are imported into most cities for supply, distributed through underground pipes, and collected again in sewers or septic tanks. The leaks from these pipe networks often provide substantial recharge. Sources of recharge in urban areas are identified through piezometry, chemical signatures, and water balances. All three approaches have problems. Recharge is quantified either by individual components (direct recharge, water-mains leakage, septic tanks, etc.) or holistically. Working with individual components requires large amounts of data, much of which is uncertain and is likely to lead to large uncertainties in the final result. Recommended holistic approaches include the use of groundwater modelling and solute balances, where various types of data are integrated. Urban recharge remains an under-researched topic, with few high-quality case studies reported in the literature. Electronic Publication     

Constraints on the application of carbon isotope thermometry in high- to ultrahigh-temperature metamorphic terranes

Nine marble horizons from the granulite facies terrane of southern India were examined in detail for stable carbon and oxygen isotopes in calcite and carbon isotopes in graphite. The marbles in Trivandrum Block show coupled lowering of δ¹³C and δ¹⁸O values in calcite and heterogeneous single crystal δ¹³C values (? 1 to ? 10‰) for graphite indicating varying carbon isotope fractionation between calcite and graphite, despite the granulite facies regional metamorphic conditions. The stable isotope patterns suggest alteration of δ¹³C and δ¹⁸O values in marbles by infiltration of low δ¹³C–δ¹⁸O‐bearing fluids, the extent of alteration being a direct function of the fluid‐rock ratio. The carbon isotope zonation preserved in graphite suggests that the graphite crystals precipitated/recrystallized in the presence of an externally derived CO₂‐rich fluid, and that the infiltration had occurred under high temperature and low f_O2 conditions during metamorphism. The onset of graphite precipitation resulted in a depletion of the carbon isotope values of the remaining fluid+calcite carbon reservoir, following a Rayleigh‐type distillation process within fluid‐rich pockets/pathways in marbles resulting in the observed zonation. The results suggest that calcite–graphite thermometry cannot be applied in marbles that are affected by external carbonic fluid infiltration. However, marble horizons in the Madurai Block, where the effect of fluid infiltration is not detected, record clear imprints of ultrahigh temperature metamorphism (800–1000 °C), with fractionations reaching <2‰. Zonation studies on graphite show a nominal rimward lowering δ¹³C on the order of 1 to 2‰. The zonation carries the imprint of fluid deficient/absent UHT metamorphism. Commonly, calculated core temperatures are > 1000 °C and would be consistent with UHT metamorphism.     

Effects of geology and human activity on the dynamics of salt-water intrusion in three coastal aquifers in southern Spain

 Mathematical modelling of salt-water intrusion processes in three aquifers on the southern coast of Spain (Río Verde, Río Vélez and Castell de Ferro) reveals that, although all three systems are subject to the same climate and seasonal over-exploitation, geological and human factors have very different effects on the dynamics of contamination. In the Río Verde aquifer, the most important influence is the high volume of extractions occurring during the dry season; in Río Vélez, the intrusion is strongly controlled by infiltration of water from the river to the aquifer, and, in the Castell de Ferro system, an intensely karstified carbonate massif lying in contact with both the sea water and the detrital aquifer represents the main entrance point for influx of sea water and subsequent washing of the aquifer. We have undertaken a mathematical simulation of various possible measures to counteract intrusion, according to the specific characteristics of the process in each aquifer. These measures include artificial recharge, use of natural recharge from the river as a hydraulic barrier, and the construction of a low-permeability barrier. Received: 5 December 1995 · Accepted: 12 April 1996     

The precipitation infiltration and runoff recharging experiment observation in the Taklimakan Desert

１　ＩＮＴＲＯＤＵＣＴＩＯＮＴｈｅｌｏｃａｌｐｒｅｃｉｐｉｔａｔｉｏｎｉｓｍｏｓｔｉｍｐｏｒｔａｎｔａｖａｉｌａｂｌｅｆｒｅｓｈｗａｔｅｒｓｏｕｒｃｅｉｎｄｅｓｅｒｔｓ．ＴｈｅＴａｋｌｉｍａｋａｎＤｅｓｅｒｔｂｅｌｏｎｇｓｔｏａｎｅｘｔｒｅｍｅａｒｉｄｂｅｌｔ．Ａｃｃｏｒｄｉｎｇｔｏａｆｅｗｙｅａｒｓ’ｌｉｍｉｔｅｄｏｂｓｅｒｖａｔｉｏｎｄａｔａ,ｉｔｉｓｅｓｔｉｍａｔｅｄｔｈａｔｔｈｅｐｒｅｃｉｐｉｔａｔｉｏｎｓｈｏｕｌｄｂｅｉｎｔｈｅｒａｎｇｅｏｆ３０－５０ｍｍａｎｎｕａｌｌｙ．Ｈｏｗｅｖ…