A multi‐level parallelized substructuring‐frontal solution for coupled thermo/hydro/mechanical problems in unsaturated soil

This paper proposes a multi‐level parallelized substructuring–frontal combined algorithm for the analysis of the problem of thermo/hydraulic/mechanical behaviour of unsaturated soil. Temperature, displacement, pore water pressure and pore air pressure are treated as the primary variables in a non‐linear analysis. Details are given firstly of the substructuring–frontal combined approach. The incorporation of the algorithm in a multi‐level parallel strategy is then discussed. The parallel processing can thus be carried out at different substructural levels. The method thus developed impacts, in a positive way, on both computer storage requirement and execution time. Copyright © 2003 John Wiley & Sons, Ltd.     

Problems with biogenic silica measurement in marginal seas

Surface sediment samples from the Bohai, Yellow Sea, and the Pacific were used to assess biogenic silica (BSi) content and to study uncertainties in BSi measurements. The contents of BSi in the Bohai and Yellow Sea are all less than 1%. The dissolution of BSi in sediments from the Bohai and Yellow Sea is very important to maintain high levels of silicate in the water column. The non-biogenic silica from clay minerals has an obvious effect on BSi of sediment samples in the Bohai and Yellow Sea with low BSi and high clay minerals. The solid to solution ratio was found to have a great influence on BSi measurement, which can induce uncertainties up to 75%. The effect of loss by sorption and centrifugation is negligible. Interlaboratory comparison of techniques for BSi measurement by the wet alkaline extraction technique of Mortlock and Froelich [Deep-Sea Res. 36 (1989) 1415-1426] with clay correction was suggested to give no significant differences. However, differences in sediment compositions and reagent to sample ratio may limit the application of the wet alkaline extraction method.     

成像光谱矿物填图精度兼与矿物丰度关系初探

成像光谱遥感技术在岩石矿物识别和矿物填图方面发挥着越来越大作用,而成像光谱矿物填图的精度问题一直是研究的焦点。文章利用高光谱数据HyMap对新疆东天山地区的矿物填图结果,通过引入矿物填绘分布强度的概念,探索性的分析了成像光谱矿物填图与填绘矿物丰度的关系。     

A response‐based decoupling criterion for multiply‐supported secondary systems

It is often infeasible to carry out coupled analyses of multiply‐supported secondary systems for earthquake excitations. ‘Approximate’ decoupled analyses are then resorted to, unless the response errors due to those are significantly high. This study proposes a decoupling criterion to identify such cases where these errors are likely to be larger than an acceptable level. The proposed criterion is based on the errors in the primary system response due to decoupling and has been obtained by assuming (i) the input excitation to be an ideal white noise process, (ii) cross‐modal correlation to be negligible, and (iii) the combined system to be classically damped. It uses the modal properties of the undamped combined system, and therefore, a perturbation approach has been formulated to determine the combined system properties in case of light to moderately heavy secondary systems. A numerical study has been carried out to illustrate the accuracy achieved with the proposed perturbation formulation. The proposed decoupling criterion has been validated with the help of two example primary‐secondary systems and four example excitation processes. Copyright © 2002 John Wiley & Sons, Ltd.     

论三维等时线叠加反偏移中的有关问题

利用几何射线理论和一种考虑了积分域边缘贡献的二维稳想法，研究了三维等时线叠加反偏移中的反偏移场，反偏移加权函及反偏移孔径。结果证明，在有限孔径条件下，反偏移场的结构比已发表的结果要复杂和多。即使在最简单的条件下，反偏移场也是由反偏移信号的反偏移噪声（孔径效应）叠加而成的。而且，反偏移场的结构强烈地依赖于反偏移孔径边缘的位置。为了消除孔径效应，应采用最佳反偏移孔径和针对有限孔径的加权函数。根据定义，最佳反偏移孔径为稳相点的第一和第二Fresnel区之和。在第一Fresnel区内，有限孔径和加权函数与文献中所给出的加权函数完全一致。而在第二Fresnel区内，有限孔径加权函数为常规的加权函数与一窗函数的乘积。在反偏移孔径的边缘上，有限孔径加权函恒取零值。     

高密度电法勘探在岩溶查找中的应用

介绍了武汉市汤逊湖污水处理厂厂址的地质概况和地球物理特征，以及高密度电法勘探的施工方案，分析了视电阻率异常特征，并说明了其异常验证情况。高密度电法勘探结果表明该区存在溶洞，为施工提供了决策依据，建议在有溶洞的地段采取相应措施，以防止工程建设后发生地质灾害。     

Geoid determination using adapted reference field, seismic Moho depths and variable density contrast

 The traditional remove-restore technique for geoid computation suffers from two main drawbacks. The first is the assumption of an isostatic hypothesis to compute the compensation masses. The second is the double consideration of the effect of the topographic–isostatic masses within the data window through removing the reference field and the terrain reduction process. To overcome the first disadvantage, the seismic Moho depths, representing, more or less, the actual compensating masses, have been used with variable density anomalies computed by employing the topographic–isostatic mass balance principle. In order to avoid the double consideration of the effect of the topographic–isostatic masses within the data window, the effect of these masses for the used fixed data window, in terms of potential coefficients, has been subtracted from the reference field, yielding an adapted reference field. This adapted reference field has been used for the remove–restore technique. The necessary harmonic analysis of the topographic–isostatic potential using seismic Moho depths with variable density anomalies is given. A wide comparison among geoids computed by the adapted reference field with both the Airy–Heiskanen isostatic model and seismic Moho depths with variable density anomaly and a geoid computed by the traditional remove–restore technique is made. The results show that using seismic Moho depths with variable density anomaly along with the adapted reference field gives the best relative geoid accuracy compared to the GPS/levelling geoid. Received: 3 October 2001 / Accepted: 20 September 2002 Correspondence to: H.A. Abd-Elmotaal     

地震前兆观测仪器标定问题的探讨

标定工作，在地震前兆观测仪器的研究，使用及所得数据的处理中均已成为一个不可少的环节，但缺少有关标定问题的基石性研究和讨论。本文就标定的定义、种类、目的、要求、存在的问题等做一粗线的讨论，以期今后加强这一工作的深入研究。