Parameter identification of inelastic structures under dynamic loads

The generalized model of differential hysteresis contains 13 control parameters with which it can curve‐fit practically any hysteretic trace. Three identification algorithms are developed to estimate the control parameters of hysteresis for different classes of inelastic structures. These algorithms are based upon the simplex, extended Kalman filter, and generalized reduced gradient methods. Novel techniques such as global search and internal constraints are incorporated to facilitate convergence and stability. Effectiveness of the devised algorithms is demonstrated through simulations of two inelastic systems with both pinching and degradation characteristics in their hysteretic traces. Owing to very modest computing requirements, these identification algorithms may become acceptable as a design tool for mapping the hysteretic traces of inelastic structures. Copyright © 2002 John Wiley & Sons, Ltd.     

An alternative Boussinesq equation considering the effect of hysteresis on coastal groundwater waves

This paper presents an alternative Boussinesq equation considering hysteresis effect via a third‐order derivative term. By introducing an improved moisture–pressure retention function, this equation describes, with reasonable precision, groundwater propagation in coastal aquifers subject to Dirichlet boundary condition of different oscillation frequencies. Test results confirmed that it is necessary to consider horizontal and vertical flows in unsaturated zone, because of their variable influences on hysteresis. Hysteresis in unsaturated zone can affect the water table wave number of groundwater wave motion, such as wave damping rate and phase lag. Oscillations with different periods exert different hysteresis effect on wave propagation. Truncation/shrinkage of unsaturated zones also affects the strength of hysteresis. These impacts can be reflected in the alternative Boussinesq equation by adjusting the parameter representing the variation rate of moisture associated with pressure change, as opposed to traditional computationally expensive hysteresis algorithms. The present Boussinesq equation is simple to use and can provide feasible basis for future coupling of groundwater and surface water models. Copyright © 2016 John Wiley & Sons, Ltd.     

Concentration–discharge relationships in the coal mined region of the New River basin and Indian Fork sub‐basin,Tennessee, USA

For many basins, identifying changes to water quality over time and understanding current hydrologic processes are hindered by fragmented and discontinuous water‐quality and hydrology data. In the coal mined region of the New River basin and Indian Fork sub‐basin, muted and pronounced changes, respectively, to concentration–discharge (C–Q) relationships were identified using linear regression on log‐transformed historical (1970s–1980s) and recent (2000s) water‐quality and streamflow data. Changes to C–Q relationships were related to coal mining histories and shifts in land use. Hysteresis plots of individual storms from 2007 (New River) and the fall of 2009 (Indian Fork) were used to understand current hydrologic processes in the basins. In the New River, storm magnitude was found to be closely related to the reversal of loop rotation in hysteresis plots; a peak‐flow threshold of 25 cubic meters per second (m³/s) segregates hysteresis patterns into clockwise and counterclockwise rotational groups. Small storms with peak flow less than 25 m³/s often resulted in dilution of constituent concentrations in headwater tributaries like Indian Fork and concentration of constituents downstream in the mainstem of the New River. Conceptual two or three component mixing models for the basins were used to infer the influence of water derived from spoil material on water quality. Copyright © 2012 John Wiley & Sons, Ltd.     

Stormflow concentration–discharge dynamics of suspended sediment and dissolved phosphorus in an agricultural watershed

Concentration–discharge (C-Q) relationships are an effective tool for identifying watershed biogeochemical source and transport dynamics over short and long timescales. We examined stormflow C-Q, hysteresis, and flushing patterns of total suspended sediment (TSS) and soluble reactive phosphorus (SRP) in two stream reaches of a severely impaired agricultural watershed in northeastern Wisconsin, USA. The upper watershed reach—draining a relatively flat, row crop-dominated contributing area—showed predominantly anti-clockwise TSS hysteresis during storms, suggesting that particulate materials were mobilized more from distal upland sources than near- and in-channel areas. In contrast, the incised lower watershed reach produced strong TSS flushing responses on the rising limb of storm hydrographs and clockwise hysteresis, signalling rapid mobilization of near- and in-channel materials with increasing event flows. C-Q relationships for SRP showed complex patterns in both the upper and lower reaches, demonstrating largely non-linear chemodynamic C-Q behaviour during events. As with TSS, anti-clockwise SRP hysteresis in the upper reach suggested a delay in the hydrologic connectivity between SRP sources and the stream, with highly variable SRP concentrations during some events. A broad range of clockwise, anti-clockwise, and complex SRP hysteresis patterns occurred in the lower watershed, possibly influenced by in-channel legacy P stores and connection to tile drainage networks in the lower watershed area. Total suspended sediment and SRP responses were also strongly related to precipitation event characteristics including antecedent precipitation, recovery period, and precipitation intensity, highlighting the complexity of stormflow sediment and phosphorus responses in this severely impaired agricultural stream.     

紫色土水分特征曲线室内测定方法的对比

为探寻全吸力范围内土壤水分特征曲线的可靠测定方法,采用沙箱排水法、Hyprop仪蒸发法、压力膜仪排水法和露点水势仪蒸发法分吸力段测定盐亭紫色土耕地表层2~7 cm和亚表层7~12 cm土壤的水分特征曲线,对比测定结果的方法间差异,并分析其原因。结果表明:对于表层和亚表层土壤,低吸力段(h >-100 cm)水分特征曲线的沙箱法和Hyprop仪法的均方根误差E_RMS (θ)均较小,在0.026~0.082 cm3/cm3范围内,确定系数R2均大于0.962,说明这两种方法测定结果之间差异不大。高吸力段(h <-330 cm)的压力膜仪法与露点仪法测定结果之间的差异较大,E_RMS (θ)为0.062~0.097 cm3/cm3,R2较低,为0.775~0.952。因此,全吸力范围内水分特征曲线测定方法的选择与组合应考虑土壤孔径分布特征和研究目的。     

屈曲约束支撑滞回曲线模型和刚度方程的建立

针对屈曲约束支撑,本文根据其反复荷载作用下的滞回特征,提出了一种滞回模型,并建立了屈曲约束支撑的弹塑性刚度方程。根据这种模型编制程序模拟绘制了屈曲约束支撑的滞回曲线,将模拟计算曲线与试验所得曲线进行对比,对比结果表明本文所提模型是准确、有效的。     

周期性的或伴有贯穿流的西边界流跨隙流动的迟滞变异过程

使用1.5层准地转约化重力模式研究了周期性的或伴有贯穿流的西边界流跨隙流动的迟滞变异过程。当西边界流变化的周期比罗斯贝波在缺口处调整的时间尺度大得多时,在雷诺数增加和减少过程的霍夫分叉点都发生延迟,从而产生新的雷诺数迟滞区间;并且西边界流流态转变的临界值变化显著;且周期强迫越短,雷诺数迟滞区间越大。当西边界流变化的周期与罗斯贝波在缺口处调整的时间尺度相当时,西边界流在缺口的流态呈无迟滞的周期性变化,且西边界流入侵西海盆的程度随周期减少而变小。此外,当贯穿流的流量大于西边界流的一半时,会显著影响西边界流在缺口处的迟滞变异过程;西边界流向西入侵程度和流态转变发生的临界雷诺值均发生变化,且贯穿流流量越大变化越大。     

兰州台FSQ自记水管倾斜仪与CZB-1型竖直摆倾斜仪的对比分析

将兰州台的FSQ与CZB-1仪的观测资料质量、变化趋势、潮汐响应函数及映震能力进行了对比分析,认为:FSQ的观测资料的质量比CZB-1要好,因CZB-1的资料存在漂移现象;在潮汐因子和相位滞后方面,FSQ比CZB-1反应灵敏;但CZB-1的映震能力比FSQ强。     

钢-混凝土组合剪力墙抗震性能研究简述

钢-混凝土组合剪力墙可以充分发挥钢和混凝土2种材料的优势,改善传统钢筋混凝土剪力墙延性和耗能能力较差的缺点,在钢-混凝土混合结构中具有应用优势。本文简要介绍了国内外一些新型的钢-混凝土组合剪力墙,并简述了其抗震性能的研究现状,最后对一些关键问题进行了初步探讨。     

抗冻蛋白的研究及其在生物技术中的应用

抗冻蛋白能够与冰晶结合，降低冰点并抑制冰的重结晶，从而使生物体免于冰冻伤害。就不同类型的抗冻蛋白的结构、起源、功能和抗冻作用机制进行了全面的回顾，并对国内近年来抗冻蛋白在生物技术中的应用进行了综述。