Subsurface flow measurements using passive flux meters in variably-saturated cold-regions landscapes

To date, passive flux meters have predominantly been applied in temperate environments for tracking the movement of contaminants in groundwater. This study applies these instruments to reduce uncertainty in (typically instantaneous) flux measurements made in a low-gradient, wetland dominated, discontinuous permafrost environment. This method supports improved estimation of unsaturated and over-winter subsurface flows which are very difficult to quantify using hydraulic gradient-based approaches. Improved subsurface flow estimates can play a key role in understanding the water budget of this landscape.     

Solution for a plane strain rough‐walled hydraulic fracture driven by turbulent fluid through impermeable rock

The impact of turbulent flow on plane strain fluid‐driven crack propagation is an important but still poorly understood consideration in hydraulic fracture modeling. The changes that hydraulic fracturing has experienced over the past decade, especially in the area of fracturing fluids, have played a major role in the transition of the typical fluid regime from laminar to turbulent flow. Motivated by the increasing preponderance of high‐rate, water‐driven hydraulic fractures with high Reynolds number, we present a semianalytical solution for the propagation of a plane strain hydraulic fracture driven by a turbulent fluid in an impermeable formation. The formulation uses a power law relationship between the Darcy‐Weisbach friction factor and the scale of the fracture roughness, where one specific manifestation of this generalized friction factor is the classical Gauckler‐Manning‐Strickler approximation for turbulent flow in a rough‐walled channel. Conservation of mass, elasticity, and crack propagation are also solved simultaneously. We obtain a semianalytical solution using an orthogonal polynomial series. An approximate closed‐form solution is enabled by a choice of orthogonal polynomials embedding the near‐tip asymptotic behavior and thus giving very rapid convergence; a precise solution is obtained with 2 terms of the series. By comparison with numerical simulations, we show that the transition region between the laminar and turbulent regimes can be relatively small so that full solutions can often be well approximated by either a fully laminar or fully turbulent solution.     

Geostatistical features of streambed vertical hydraulic conductivities in Frenchman Creek Watershed in Western Nebraska

This study evaluated the spatial variability of streambed vertical hydraulic conductivity (K_v) in different stream morphologies in the Frenchman Creek Watershed, Western Nebraska, using different variogram models. Streambed K_v values were determined in situ using permeameter tests at 10 sites in Frenchman, Stinking Water and Spring Creeks during the dry season at baseflow conditions. Measurements were taken both in straight and meandering stream channels during a 5 day period at similar flow conditions. Each test site comprised of at least three transects and each transect comprised of at least three K_v measurements. Linear, Gaussian, exponential and spherical variogram models were used with Kriging gridding method for the 10 sites. As a goodness-of-fit statistic for the variogram models, cross-validation results showed differences in the median absolute deviation and the standard deviation of the cross-validation residuals. Results show that using the geometric means of the 10 sites for gridding performs better than using either all the K_v values from the 93 permeameter tests or 10 K_v values from the middle transects and centre permeameters. Incorporating both the spatial variability and the uncertainty involved in the measurement at a reach segment can yield more accurate grid results that can be useful in calibrating K_v at watershed or sub-watershed scales in distributed hydrological models.     

Discriminating between pore‐filling load and bed‐structure load: a new porosity‐based method,exemplified for the river Rhine

Sediments contained in the river bed do not necessarily contribute to morphological change. The finest part of the sediment mixture often fills the pores between the larger grains and can be removed without causing a drop in bed level. The discrimination between pore‐filling load and bed‐structure load, therefore, is of practical importance for morphological predictions. In this study, a new method is proposed to estimate the cut‐off grain size that forms the boundary between pore‐filling load and bed‐structure load. The method evaluates the pore structure of the river bed geometrically. Only detailed grain‐size distributions of the river bed are required as input to the method. A preliminary validation shows that the calculated porosity and cut‐off size values agree well with experimental data. Application of the new cut‐off size method to the river Rhine demonstrates that the estimated cut‐off size decreases in a downstream direction from about 2 to 0·05 mm, covariant with the downstream fining of bed sediments. Grain size fractions that are pore‐filling load in the upstream part of the river thus gradually become bed‐structure load in the downstream part. The estimated (mass) percentage of pore‐filling load in the river bed ranges from 0% in areas with a unimodal river bed, to about 22% in reaches with a bimodal sand‐gravel bed. The estimated bed porosity varies between 0·15 and 0·35, which is considerably less than the often‐used standard value of 0·40. The predicted cut‐off size between pore‐filling load and bed‐structure load (D_c,p) is fundamentally different from the cut‐off size between wash‐load and bed‐material load (D_c,w), irrespective of the method used to determine D_c,p or D_c,w. D_c,w values are in the order of 10^?1 mm and mainly dependent on the flow characteristics, whereas D_c,p values are generally much larger (about 10⁰ mm in gravel‐bed rivers) and dependent on the bed composition. Knowledge of D_c,w is important for the prediction of the total sediment transport in a river (including suspended fines that do not interact with the bed), whereas knowledge of D_c,p helps to improve morphological predictions, especially if spatial variations in D_c,p are taken into account. An alternative to using a spatially variable value of D_c,p in morphological models is to use a spatially variable bed porosity, which can also be predicted with the new method. In addition to the morphological benefits, the new method also has sedimentological applications. The possibility to determine quickly whether a sediment mixture is clast‐supported or matrix‐supported may help to better understand downstream fining trends, sediment entrainment thresholds and variations in hydraulic conductivity.     

GYD-300型全液压动力头工程钻机的研制

GYD-300型全液压动力头工程钻机为全液压驱动,动力头反循环式机型。液压系统采用插装阀集成结构,电液复合操作。使用PC控制监测系统,适时检测孔底各相关压力,对不同地层进行范围设置,实现钻进过程中孔底的自动、手动恒压钻进。重点介绍了该钻机的结构特点、实验情况、主要技术参数等。     

东南沿海海堤现状调研报告（福建部分）

这部分是福建省正在建设中的四大海堤现状调研，包括达标设计各项指标及其加高加固的技术经验。同时调研了围海工程堵口海堤的施工过程，并对灌砂防渗措施加以评述。最后介绍了兴化湾的莆田海堤试验站和木兰陂水利工程     

新建水坝对下游已建水工建筑物的影响分析

分析了新建水坝及社会经济发展因素对坝下游水流及泥沙的影响，用一个简易河床模型来说明新建大坝后下游河床的演变规律，通过坝下游河床一般演变分析来阐述局部冲刷对已建水工建筑物基础的影响及对已建水工建筑基础的防护措施。     

水槽造流系统水力计算与泵机选择

提供一种完整的用于试验水槽造流系统的水力计算和泵机选择方法 ,可用于其他类似工程设计。     

水成沉积与风成沉积及古土壤的磁组构特征

晚第四纪水成沉积、风成沉积、古土壤等的磁组构研究表明,不同成因的沉积物具有明显不同的磁组构特征。一般地,水成沉积的体积磁化率Ｋ受物源和水动力因素控制,Ｐ和Ｆ均＞１．０２,ｑ＜０．５;风成沉积的Ｋ受物源控制,内陆黄土的Ｋ明显高于沿海黄土及海岸风沙Ｋ,Ｐ和Ｆ均＜１．０２,ｑ的平均值＞０．５５;古土壤的Ｋ受母质沉积类型和成土环境的氧化还原条件控制,内陆古土壤的Ｋ偏高,沿海古土壤的Ｋ偏低,内陆古土壤的Ｋ远高于沿海古土壤的Ｋ,Ｐ和Ｆ均＜１．０２,ｑ的平均值在０．５左右。运用典型沉积的磁组构特征对比分析未知沉积物,可以得到未知沉积物的物源、沉积过程和环境信息。     

渤海南部表层沉积的相特征

通过海上调查及实验室分析,查明渤海南部表层沉积物在结构类型、矿物组合、生物组分及沉积构造等相特征方面具有明显的分区性。渤海南部存在五种沉积相:黄河水下三角洲相、陆架盆地相、海湾相、潮流浅滩相及古滨岸相。黄河水下三角洲相从河口延至水深15—20米处,沉积速率很高,沉积物富含碎屑云母及CaCo_3。陆架盆地相的沉积为粉砂质粘土,具有生物扰动构造。