Metamorphic phase relations in orthopyroxene-bearing granitoids: implication for high-pressure metamorphism and prograde melting in the continental crust

In this work, the factors controlling the formation and preservation of high-pressure mineral assemblages in the metamorphosed orthopyroxene-bearing metagranitoids of the Sandmata Complex, Aravalli-Delhi Mobile Belt (ADMB), northwestern India have been modelled. The rocks range in composition from farsundite through quartz mangerite to opdalite, and with varying K₂O, Ca/(Ca + Na)_rock and FeO_tot + MgO contents. A two stage metamorphic evolution has been recorded in these rocks.
An early hydration event stabilized biotite with or without epidote at the expense of magmatic orthopyroxene and plagioclase. Subsequent high-pressure granulite facies metamorphism (∼15 kbar, ∼800 °C) of these hydrated rocks produced two rock types with contrasting mineralogy and textures. In the non-migmatitic metagranitoids, spectacular garnet ± K-feldspar ± quartz corona was formed around reacting biotite, plagioclase, quartz and/or pyroxene. In contrast, biotite ± epidote melting produced migmatites, containing porphyroblastic garnet incongruent solids and leucosomes.
Applying NCKFMASHTO T–M (H₂O) and P–T pseudosection modelling techniques, it is demonstrated that the differential response of these magmatic rocks to high-pressure metamorphism is primarily controlled by the scale of initial hydration. Rocks, which were pervasively hydrated, produced garnetiferous migmatites, while for limited hydration, the same metamorphism formed sub-solidus garnet-bearing coronae. Based on the sequence of mineral assemblage evolution and the mineral compositional zoning features in the two metagranitoids, a clockwise metamorphic P–T path is constrained for the high-pressure metamorphic event. The finding has major implications in formulating geodynamic model of crustal amalgamation in the ADMB.     

旋挖钻机与转盘钻机组合施工法的应用

对旋挖钻机、转盘钻机各自特点和施工成本进行对比分析,提出组合施工方法设想,并通过工程实例得到成功实践,为以后类似工程提供借鉴。客观地提出了旋挖钻机的使用条件和面临的问题。     

旋转谱理论探讨

本文应用向量随机过程分解模型对旋转谱作出物理解释;此外,还修改了线性振荡度的定义,导出了极化度、线性振荡度和旋转系数之间的关系式,并讨论了它们与总相干、同相相干、异相相干之间的关系。     

高压旋喷桩有关问题的探索和研究

通过工程实例，介绍了单管法高压旋喷桩施工工艺、技术参数、施工中存在的问题以及注意事项。阐述了一些常见故障及预防措施。     

襄樊汉江四桥大口径灌注桩成孔施工实践

介绍了使用泥浆护壁气举反循环回转钻进工艺进行襄樊汉江四桥大口径嵌岩桩的施工实践。施工中采用下置双护简隔离卵石层，合理选用钻头类型(卵砾石层采用五翼合金刮刀钻头，基岩采用球齿滚刀钻头)和钻进参数(混合器沉没深度，尾管长度，孔内空气流量与压力)，摸索与总结出一套复杂地层成孔施工经验。     

青藏高原北部可可西里狮头山含硬玉岩类的基本特征及地质意义

描述了可可西里山南狮头山含硬玉岩类的岩石学、矿物学特征。含硬玉岩类的原岩为辉长岩，围岩为石炭—二叠系。由于变质作用不彻底，保留有原岩的矿物组合。典型的高压变质矿物组合为：钠长石 硬玉 霓石 蓝闪石 绿帘石 绿泥石。硬玉SiO2、FeO偏低，Al2O3、Na2O明显偏高，变质矿物组合中以富钠矿物为主，缺少石英，与国内外含硬玉岩类的原岩成分、变质矿物组合均不相同，是一种新的高压低温硬玉岩类。狮头山高压变质带向西延至若拉岗日、大横山一带，与北侧的西金乌兰—金沙江板块缝合带(西段)平行产出，以此推测缝合带南侧的羌北—昌都板块向北消减于巴颜喀拉板块之下。     

高压旋喷桩桩周土摩阻力的分析与探讨

通过对旋喷桩的单桩静载试验，探讨了桩周土摩阻力作用的情况，通过计算和分析，得出了两个结论，为旋喷桩基础的设计提供参考。     

High-pressure granulites: formation, recovery of peak conditions and implications for tectonics

High‐pressure granulites are characterised by the key associations garnet‐clinopyroxene‐plagioclase‐quartz (in basic rocks) and kyanite‐K‐feldspar (metapelites and felsic rocks) and are typically orthopyroxene‐free in both basic and felsic bulk compositions. In regional metamorphic areas, two essential varieties exist: a high‐ to ultrahigh‐temperature group and a group representing overprinted eclogites. The high‐ to ultrahigh‐temperature type formerly contained high‐temperature ternary feldspar (now mesoperthite) coexisting with kyanite, is associated with garnet peridotites, and formed at conditions above 900 °C and 1.5 GPa. Clinopyroxene in subordinate basic rocks is Al‐rich and textural evidence points to a high‐pressure–high‐temperature melting history. The second variety contains symplectite‐like or poikilitic clinopyroxene‐plagioclase intergrowths indicating former plagioclase‐free, i.e. eclogite facies assemblages. This type of rock formed at conditions straddling the high‐pressure amphibolite/high‐pressure granulite field at around 700–850 °C, 1.0–1.4 GPa. Importantly, in the majority of high‐pressure granulites, orthopyroxene is secondary and is a product of reactions at pressures lower than the peak recorded pressure. In contrast to low‐ and medium‐pressure granulites, which form at conditions attainable in the mid to lower levels of normal continental crust, high‐pressure granulites (of nonxenolith origin) mostly represent rocks formed as a result of short‐lived tectonic events that led to crustal thickening or subduction of the crust into the mantle. Short times at high‐temperature conditions are reflected in the preservation of prograde zoning in garnet and pyroxene. High‐pressure granulites of both regional types, although rare, are known from both old and young metamorphic terranes (e.g. c. 45 Ma, Namche Barwa, E Himalaya; 400–340 Ma, European Variscides; 1.8 Ga Hengshan, China; 1.9 Ga, Snowbird, Saskatchewan and 2.5 Ga Jianping, China). This spread of ages supports proposals suggesting that thermal and tectonic processes in the lithosphere have not changed significantly since at least the end of the Archean.     

Formation Environment of the High-Pressure Metamorphic Rocks, Western Tianshan, Xinjiang, China

1.IntroductionFromexperimefltalphaseequilibrium,stableisotOPe,andthermo-barometricstudies,ProgradebineschistdineralparageneseshavebeenproducedexclusivelyatrelativelyhighPadratios(DeRoever,1956;Miyashiro,1961;DobretsovandSobolev,1984;Emst,1973,1988;Maruyamaetal.,1996).InthelastthreedeCades,withtheadvanceofplatetectonics,manygeologistssuggestedthatblueschists,representinghigh-Pressurelow-tCmperamre~rphism,areformedbysubductionofoceanicplate(Emst,1973).Blueschistshavealsobeenregardedasoneof…     

单管高压旋喷注浆技术在砂层加固、止水工程中的应用

就其他工艺在砂层的加固、止水工程中难以解决的问题，提出了单管高压旋喷注浆技术，并通过一些工程实例证实此工艺的可行性。