Metamorphic phase relations in orthopyroxene-bearing granitoids: implication for high-pressure metamorphism and prograde melting in the continental crust

In this work, the factors controlling the formation and preservation of high-pressure mineral assemblages in the metamorphosed orthopyroxene-bearing metagranitoids of the Sandmata Complex, Aravalli-Delhi Mobile Belt (ADMB), northwestern India have been modelled. The rocks range in composition from farsundite through quartz mangerite to opdalite, and with varying K₂O, Ca/(Ca + Na)_rock and FeO_tot + MgO contents. A two stage metamorphic evolution has been recorded in these rocks.
An early hydration event stabilized biotite with or without epidote at the expense of magmatic orthopyroxene and plagioclase. Subsequent high-pressure granulite facies metamorphism (∼15 kbar, ∼800 °C) of these hydrated rocks produced two rock types with contrasting mineralogy and textures. In the non-migmatitic metagranitoids, spectacular garnet ± K-feldspar ± quartz corona was formed around reacting biotite, plagioclase, quartz and/or pyroxene. In contrast, biotite ± epidote melting produced migmatites, containing porphyroblastic garnet incongruent solids and leucosomes.
Applying NCKFMASHTO T–M (H₂O) and P–T pseudosection modelling techniques, it is demonstrated that the differential response of these magmatic rocks to high-pressure metamorphism is primarily controlled by the scale of initial hydration. Rocks, which were pervasively hydrated, produced garnetiferous migmatites, while for limited hydration, the same metamorphism formed sub-solidus garnet-bearing coronae. Based on the sequence of mineral assemblage evolution and the mineral compositional zoning features in the two metagranitoids, a clockwise metamorphic P–T path is constrained for the high-pressure metamorphic event. The finding has major implications in formulating geodynamic model of crustal amalgamation in the ADMB.     

高温高压岩石流变仪的围压标定方法

高温高压岩石流变仪围压标定的主要方法为氯化盐类的部分熔融法和矿物相变法。利用氯化盐类进行压力标定时,不仅可以利用单一盐类,也可以使用多种盐类的混合物;常用的压力标定矿物相变及其适用温压范围如下:石英-柯石英,500~1200℃、2.5~3.2GPa;钠长石-硬玉+石英,600~1200℃、1.6~3.2GPa;铁橄榄石+石英-铁辉石,600~1200℃、1~1.7GPa;磷镁石-Mg3(PO4)2-Ⅱ,565~825℃、0.6~0.9GPa;方解石-文石,600~1200℃、0.5~2.5GPa。不同的标定方法具有不同的特征,文中将进行详细介绍。     

大别山榴辉岩一片麻岩杂岩的成因

大别山榴辉岩由辉长岩、大陆拉斑玄武岩和少量泥灰质经高压变质作用形成。大别地块可划分出四个形成条件不同的榴辉岩区,它们代表一种构造－岩石组合体。片麻岩杂岩中各种高压变质岩类的发现证明它们与榴辉岩一起经历了原地高压变质过程。二者变质作用Ｐ－Ｔ参数的差异归因于抬升过程中退变质反应速度的不同。不同地区榴辉岩退变质组合及Ｐ－Ｔ条件与围岩的一致性表明,大别杂岩现今所展示的“递增”变质带是由榴辉岩相退变质作用形成的。高压榴辉岩－片麻岩杂岩的产生是印支期扬子与华北两个大陆板块碰撞的结果。     

高压旋喷桩有关问题的探索和研究

通过工程实例，介绍了单管法高压旋喷桩施工工艺、技术参数、施工中存在的问题以及注意事项。阐述了一些常见故障及预防措施。     

The Physico-Chemical Properties of a Subducted Slab from Garnet Zonation Patterns (Sesia Zone, Western Alps)

Garnets in continentally derived high-pressure (HP) rocks ofthe Sesia Zone (Western Alps) exhibit three different chemicalzonation patterns, depending on sample locality. Comparisonof observed garnet zonation patterns with thermodynamicallymodelled patterns shows that the different patterns are causedby differences in the water content of the subducted protolithsduring prograde metamorphism. Zonation patterns of garnets inwater-saturated host rocks show typical prograde chemical zonationswith steadily increasing pyrope content and increasing XMg,together with bell-shaped spessartine patterns. In contrast,garnets in water-undersaturated rocks have more complex zonationpatterns with a characteristic decrease in pyrope and XMg betweencore and inner rim. In some cases, garnets show an abrupt compositionalchange in core-to-rim profiles, possibly due to water-undersaturationprior to HP metamorphism. Garnets from both water-saturatedand water-undersaturated rocks show signs of intervening growthinterruptions and core resorption. This growth interruptionresults from bulk-rock depletion caused by fractional garnetcrystallization. The water content during burial influences significantly thephysical properties of the subducted rocks. Due to enhancedgarnet crystallization, water-undersaturated rocks, i.e. thoselacking a free fluid phase, become denser than their water-saturatedequivalents, facilitating the subduction of continental material.Although water-bearing phases such as phengite and epidote arestable up to eclogite-facies conditions in these rocks, dehydrationreactions during subduction are lacking in water-undersaturatedrocks up to the transition to the eclogite facies, due to thethermodynamic stability of such hydrous phases at high P–Tconditions. Our calculations show that garnet zonation patternsstrongly depend on the mineral parageneses stable during garnetgrowth and that certain co-genetic mineral assemblages causedistinct garnet zonation patterns. This observation enablesinterpretation of complex garnet growth zonation patterns interms of garnet-forming reactions and water content during HPmetamorphism, as well determination of detailed P–T paths. KEY WORDS: dehydration; high-pressure metamorphism; Sesia Zone; subduction; thermodynamic modelling     

CCSD主孔100-2950m榴辉岩类和片麻岩类叶理及微断层产状特征

CCSD主孔100~2950m榴辉岩、退变榴辉岩类岩石叶理倾角明显较片麻岩类岩石叶理倾角陡,前者总体倾角55°左右,后者28°左右,局部可见片麻岩类叶理切割榴辉岩类叶理,因此两者叶理可能形成于不同时期;两类岩石之间现部分为韧性剪切带接触关系,韧性剪切带形成于苏鲁地体折返主期自SEE向NWW的韧性剪切作用。榴辉岩、退变榴辉岩类岩石叶理产状对发育于该类岩石内的微断层产状有一定控制作用,而片麻岩类岩石叶理产状对发育于该类岩石内的微断层产状控制作用相对较弱。孔区脆性变形主要反映白垩纪以来SEE-NWW向伸展构造应力场的变形特征,主孔100~1620m倾伏向以SEE向占绝对优势的微正滑断层擦痕即为该期变形的产物。     

CCSD主孔1113~1600 m花岗质片麻岩单元的变形构造特征

中国大陆科学钻探(CCSD)主孔2000m岩性剖面揭示了1113～1600m花岗质片麻岩段为地表北苏鲁超高压花岗质变质岩剪切构造叠覆岩片中的石湖镇构造岩片的花岗质片麻岩的下延部分。本单元之上下界线为韧性剪切带,内部发育小型韧性剪切变形,仅局部可见旋转碎斑体系等剪切指向标志,以SE向NW的逆冲剪切指向为主,其次为NW向SE的正滑剪切指向,并主要发育于较软弱夹层内,后者成为苏鲁地区存在伸展型穹隆构造的新证据;在1140～1280m岩性段内发育断续、较弱的拉伸线理,拉伸线理总体向SE倾伏,倾伏角为10～36°;花岗质片麻岩单元内部分石英以多晶石英条带的形式存在,花岗质片麻岩主要矿物长石基本没有动态重结晶现象,仅具较弱的形态拉长特征(X∶Z=2左右),总体面理倾向170°E,倾角平均20°,明显不同于其他岩性单元内的面理产状,可能主要代表折返变形之前的近东西向构造,而其他岩性单元受折返变形影响较大,其面理产状主要代表折返阶段形成的NE-NNE向构造;运用电子背散射(EBSD)技术进行石英组构分析并与费氏台测定对比,表明1113～1600m花岗质片麻岩单元经历了中—低温变形,局部残留有高温组构,剪切指向主要为SE向NW的逆冲,其中高温组构与中温组构均显示为SE向NW的逆冲剪切指向,反映折返早期与折返主期岩片的相对剪切方向一     

国道108线广元段公路桥梁裂缝病害及加固对策

国道108线广元段由于地质地貌条件复杂、重载作用及施工质量未能保证，桥梁裂缝病害较为普遍。文章简要介绍了沿线工程地质条件，按裂缝病害的成因将其分为3种类型：即桥台填土上部不密实引起的裂缝病害、桥台填土整体不密实引起的裂缝病害及地基土不均匀引起的裂缝病害。分别提出3种加固对策：即压浆、预应力对穿锚索锚梁及高压旋喷技术对上述病害进行治理。通过工程实例证明了这3种措施的有效性，为公路桥梁类似裂缝灾害提供了实践经验。这3种治理措施的优点为工艺简单、成本较低。但是桥梁病害的治理往往为隐蔽工程，施工难度较大、检测困难。对于压浆和高压旋喷加固工程，必须进行取芯检测，而预应力对穿锚索锚梁在施工过程中必须严格控制水平孔的倾斜度，保证施工质量。     

大别山双河超高压变质矿物O同位素平衡及其对Sm-Nd和Rb-Sr等时线年龄有效性的制约

对于变质岩 Sm-Nd 和 Rh-Sr 同位素年代学来说,其中一个重要问题是等时线矿物之间在一特定的变质事件过程中是否达到并在随后保持同位素平衡。矿物 O 同位素地质测温也是如此。由于许多情况下 Nd、Sr 和 O 在变质矿物中的扩散速率具有可比性,变质矿物之间 O 同位素平衡状况能够为矿物 Sm-Nd 和 Rb-Sr 内部等时线定年结果的有效性提供制约。为了验证其适用性,本文对大别造山带双河超高压榴辉岩和片麻岩 Sm-Nd 和 Rh-Sr 等时线矿物进行了 O 同位素地质测温。尽管Sm-Nd 等时线给出一致的三叠纪年龄(213～238Ma),同一样品 Rb-Sr 等时线却给出侏罗纪年龄(171～174Ma)。片麻岩、榴辉岩和榴闪岩矿物对 O 同位素测温得到600～720℃和420～550℃两组温度,分别对应于约225±5Ma 榴辉岩相变质和约 175±5Ma 角闪岩相退变质条件下停止同位素扩散交换的温度。同一样品三叠纪 Sm-Nd 等时线年龄的保存、侏罗纪 Rh-Sr 等时线年龄的出现以及有规律的 O 同位素温度,表明在角闪岩相退变质过程中,Sr 和 O 在含水矿物(如黑云母和角闪石)中的扩散速率在手标本尺度上比石榴石 Nd 和多硅白云母 Sr 的扩散速率快。在退变质作用过程中,等时线矿物之间的初始同位素比值均一化速率主要受扩散速率慢的矿物控制,而矿物等时线时钟的启动主要受具有高母/子体比值的矿物控制。只有当高母/子体比值矿物具有快的放射成因同位素扩散速率时,才能够应用合理的矿物等时线确定变质再造的时间。     

青藏高原北部可可西里狮头山含硬玉岩类的基本特征及地质意义

描述了可可西里山南狮头山含硬玉岩类的岩石学、矿物学特征。含硬玉岩类的原岩为辉长岩，围岩为石炭—二叠系。由于变质作用不彻底，保留有原岩的矿物组合。典型的高压变质矿物组合为：钠长石 硬玉 霓石 蓝闪石 绿帘石 绿泥石。硬玉SiO2、FeO偏低，Al2O3、Na2O明显偏高，变质矿物组合中以富钠矿物为主，缺少石英，与国内外含硬玉岩类的原岩成分、变质矿物组合均不相同，是一种新的高压低温硬玉岩类。狮头山高压变质带向西延至若拉岗日、大横山一带，与北侧的西金乌兰—金沙江板块缝合带(西段)平行产出，以此推测缝合带南侧的羌北—昌都板块向北消减于巴颜喀拉板块之下。