Isobaric cooling and anti-clockwise P–T paths in the Variscan Odenwald Crystalline Complex, Germany

Mineral assemblages in Al₂O₃‐rich, SiO₂‐ and K₂O‐poor metapelitic rocks from the western Odenwald Crystalline Complex (Variscan Mid‐German Crystalline Rise, southern Germany) include corundum, spinel, cordierite, sillimanite, garnet and staurolite. Quartz is absent from almost all samples. Therefore, the applicability of conventional geothermobarometry is very limited or even impossible. Detailed petrographic investigation on selected samples permits inference of the sequence of appearance and disappearance of several mineral assemblages. The recognition of such partial re‐equilibration stages and their associated mineral assemblages, together with mineral stabilities predicted from KFMASH pseudosections, enables the determination of the pressure‐temperature (P–T) trajectories experienced by these rocks during the Variscan metamorphism. The rocks were metamorphosed under low‐P/high‐T conditions and underwent an anti‐clockwise P–T evolution. A pressure increase from about 2 kbar to 4 ± 0.5 kbar was accompanied by heating. Peak metamorphic conditions were reached at pressures of 4 ± 0.5 kbar and temperatures of at least 640 °C, probably even higher. The retrograde evolution is characterised by near‐isobaric cooling from ≥ 640 °C to approximately 550 °C. The rocks underwent the anti‐clockwise evolution in a subduction‐related magmatic arc setting. The close spatial association of the low‐P/high‐T rocks with recently discovered metabasic eclogites in the eastern part of the Odenwald Crystalline Complex may indicate a fossil paired metamorphic belt in the Central European Variscides.     

High-T, low-P metamorphism in the Palaeoproterozoic Halls Creek Orogen, northern Australia: the middle crustal response to a mantle-related transient thermal pulse

High‐T, low‐P metamorphic rocks of the Palaeoproterozoic central Halls Creek Orogen in northern Australia are characterised by low radiogenic heat production, high upper crustal thermal gradients (locally exceeding 40 °C km^?1) sustained for over 30 Myr, and a large number of layered mafic‐ultramafic intrusions with mantle‐related geochemical signatures. In order to account for this combination of geological and thermal characteristics, we model the middle crustal response to a transient mantle‐related heat pulse resulting from a temporary reduction in the thickness of the mantle lithosphere. This mechanism has the potential to raise mid‐crustal temperatures by 150–400 °C within 10–20 Myr following initiation of the mantle temperature anomaly, via conductive dissipation through the crust. The magnitude and timing of maximum temperatures attained depend strongly on the proximity, duration and lateral extent of the thermal anomaly in the mantle lithosphere, and decrease sharply in response to anomalies that are seated deeper than 50–60 km, maintained for <5 Myr in duration and/or have half‐widths <100 km. Maximum temperatures are also intimately linked to the thermal properties of the model crust, primarily due to their influence on the steady‐state (background) thermal gradient. The amplitudes of temperature increases in the crust are principally a function of depth, and are broadly independent of crustal thermal parameters. Mid‐crustal felsic and mafic plutonism is a predictable consequence of perturbed thermal regimes in the mantle and the lowermost crust, and the advection of voluminous magmas has the potential to raise temperatures in the middle crust very quickly. Although pluton‐related thermal signatures significantly dissipate within <10 Myr (even for very large, high‐temperature intrusive bodies), the interaction of pluton‐ and mantle‐related thermal effects has the potential to maintain host rock temperatures in excess of 400–450 °C for up to 30 Myr in some parts of the mid‐crust. The numerical models presented here support the notion that transient mantle‐related heat sources have the capacity to contribute significantly to the thermal budget of metamorphism in high‐T, low‐P metamorphic belts, especially in those characterised by low surface heat flow, very high peak metamorphic geothermal gradients and abundant mafic intrusions.     

Timing of high-grade metamorphism: Early Palaeozoic U–Pb formation ages of titanite indicate long-standing high-T conditions at the western margin of Gondwana (Argentina, 26–29°S)

Abstract Concordant U–Pb ages of c. 530–510 Ma and c. 470–420 Ma on titanite from calcsilicate, orthogneiss and amphibolite rocks constrain the age of high‐T metamorphism in the Early Palaeozoic mobile belt at the western margin of Proterozoic Gondwana (Argentina, 26–29°S). The U–Pb ages document the time of titanite formation at high‐T conditions according to the stable mineral paragenesis and occurrence of titanite in the metamorphic fabric. The presence of migmatite at all sample sites indicates temperatures were > c. 650 °C. Titanite formed at similar metamorphic conditions at different times on the regional and on the outcrop scale. The titanite crystals preserved their U–Pb isotopic signatures and chemical composition under ongoing upper amphibolite to granulite facies temperatures. Different thermal peaks or deformations are only detected by the different U–Pb ages and not by changes in the mineral paragenesis or metamorphic fabric of the samples. The range of U–Pb ages, e.g. in the Ordovician and Silurian (c. 470, 460, 440, 430, 420 Ma), is interpreted as the effect polyphase deformation with deformation‐enhanced recrystallization of titanite and/or different thermal peaks during a long‐standing, geographically fixed, high‐T regime in the mid‐crust of a continental magmatic arc. A clear correlation of the different ages with distinct tectonic events, e.g. collision of terranes, is not possible based on the present knowledge of the region.     

A reappraisal of polymetamorphism in the Eastern Ghats belt — A view from north of the Godavari rift

Evidence collated from different parts of the Eastern Ghats belt north of the Godavari rift (barring the “Western Charnockite Zone” ) indicates that this sector evolved through a series of compressive structures (F₁ to F₃), with prolific migmatization in quartzofeldspathic and metapelitic gneisses synchronous with F₁ shortening, as was the syn-F₁ emplacement of profuse megacrystic K-feldspar-bearing granitoid bodies. Thereafter, melt productivity of the rocks (synchronous withF ₂– F₃ folding) sharply decreased. Mineral parageneses stable in the S₁, S₂ and S₃ fabrics indicate persistence of granulite facies conditions. P-T estimates on orthopyroxene + garnet + plagioclase + quartz assemblages anchored to recrystallized mosaic that overgrow all penetrative fabric elements in mafic granulites, granitoids and quartzofeldspathic gneisses are in the range of 900‡-950‡C and P≅ 8–9 kbar. This estimate is comparable to those retrieved from sapphirine-bearing paragenesis in Mg-Al metapelites that appear to be diachronous in relation to the fabric elements, and arguably disrupt the granoblastic mosaic. These facets in the northern sector of the orogenic belt are compatible with either a single cycle of tectonic events (i.e., F₁, F₂ and F₃ in continuum), or temporally-separate thermo-tectonic events, with the peak of earlier metamorphism (pre- to syn-F₁) at lower temperature (in the granulite facies) in comparison to the record of high post-F₃-T_max values. It is suggested on the basis of the above evidence that the late Proterozoic/Pan-African granulites in the Eastern Ghats belt north of the Godavari rift, are unlikely to be reworked equivalents of any older granulitic crust, such as the ∼1.6 Ga granulites south of the rift. Instead, the temporally disparate sectors may represent different crustal segments with unconnected pre-amalgamation tectonic history. However, if the ∼ 1.6 Ga granulites of the Western Charnockite Zone continue northwards across the rift, as suggested by recent isotope data, there are serious doubts as to the validity of a north-south division within the Eastern Ghats belt.     

Well-preserved garnet growth zoning in granulite from the Dabie Mountains, central China

Ultra-high pressure eclogites and granulites both occur in the Dabie Mountains, central China. A garnet porphyroblast from felsic granulite in the Dabie Mountains has been analysed for compositional zoning by electron microprobe. Two segments of the porphyroblast have opposite compositional variations. Segment I (from centre outward 9  mm to analytical point 18) has decreasing X_Sps and increasing X_Pyr, while Segment II (from analytical point 18, 1  mm outward to the rim) has increasing X_Sps and X_Alm and decreasing X_Pyr and X_Grs. The compositional zoning in segment I is considered as growth zoning and that in Segment II as diffusive retrograde zoning. Garnet growth zoning records a P–T  path prior to the peak granulite metamorphism. The minimum P – T  conditions are estimated to be 1.35  GPa and 850  °C for peak metamorphism, based on the highest Mg/(Fe+Mg) composition in the garnet (analytical point 18) and matrix hypersthene, biotite and plagioclase. A symplectitic corona surrounds the porphyroblast and appears to have formed at 0.6  GPa and 700  °C. The well-preserved growth zoning in garnet suggests a short residence time for the granulite at peak metamorphism and thus rapid tectonic uplift history. The P–T  path is consistent with that of ultra-high-pressure eclogite in the area. Tectonic movements during a collisional event could have brought both the granulite and the eclogite to their present positions.     

Early Paleozoic Structural and Metamorphic Evolution of Western Sierra de San Luis (Argentina), in Relation to Cuyania Accretion

Structural, metamorphic and isotopic data obtained from the Nogoli Metamorphic Complex of western Sierra de San Luis indicate that the Early Paleozoic Famatinian Orogeny overprinted an already structured and metamorphosed older basement. The older geological features are relict NW trending fabric associated with high-grade (amphibolite facies) regional metamorphism preserved within thin strips of schists and paragneisses and in the core of mafic to ultramafic lenses. Arc magmatism, medium P (Barrovian type)/high T (amphibolite to granulite facies) regional metamorphism and penetrative NNE to NE trending foliation are related to the building of the Famatinian orogenic belt. The P-T conditions of the Famatinian prograde metamorphism reached a pressure peak of ca. 8 kb, with a thermal peak from -750°C up to -820°C. U-Pb conventional and chemical dating and Ar-Ar plateau ages constrain the peak of the main orogenic phase related to the Famatinian belt to 470–457 Ma (Early to Mid-Ordovician). Greenschist facies retrograde metamorphism closely associated with shear zones and secondary Ar-Ar plateau and Sm-Nd ages suggest that a late to post-orogenic phase of the Famatinian belt was active at least since -445 Ma. This phase continued during the Silurian to Late Devonian times through multiple reactivation of early shear zones. The Famatinian Orogeny reset a previous thermal history and therefore, the timing of the relict fabric could not be constrained conclusively with radiometric dates. Despite this difficulty, a range of 520 to 490 Ma suggests some inheritance from Pampean events registered by the older NW-SE fabric. The Early to Mid-Ordovician regional metamorphism and ductile deformation of the western Sierra de San Luis is interpreted as the orogenic effects of the collision of the allochthonous Cuyania terrane with the autochthonous proto-Pacific margin of Gondwana during the Famatinian Orogeny.     

Proterozoic low-pressure/high-temperature metamorphism and an anticlockwise P–T–t path for the Hazeldene area, Mount Isa Inlier, Queensland, Australia

In the Hazeldene area, situated in the Mount Isa Inlier, Queensland, the metamorphic grade changes from chlorite zone, through biotite and cordierite zones, to sillimanite/K-feldspar zone.
Microstructural studies of rocks near the sillimanite isograd demonstrate that cordierite grew early during the development of a steep foliation (S2), was replaced by biotite, andalusite and sillimanite at the metamorphic peak late in S2, and in turn by kyanite + chlorite adjacent to localized small post-D2 shear zones. Although the anticlockwise P–T–t path is well defined, the precise P–T conditions are uncertain because of problems with experimental and thermodynamic data. The best estimate for the metamorphic peak for rocks close to the sillimanite isograd is around 600° C at 4 kbar.
The metamorphism has been dated at 1544 Ma, and was synchronous with a major crustal shortening event. Because proposed extensional events occurred more than 60 Ma earlier, their contribution to the peak metamorphic thermal perturbation would have been insignificant. The syn-metamorphic Mica Creek Pegmatites, the abundance of high heat-producing elements in the nearby pre-D2 Sybella Granite, and advective heat by fluids which caused considerable metasomatism in the Hazeldene area, may have each contributed to the thermal budget. However, the metamorphic thermal gradient may be 80°C km^-1 or higher, strongly suggesting a local magmatic control. As none are known in the area, such syn-metamorphic plutons would have to lie beneath the exposed high-grade rocks.     

Experimental Study of the Influence of Hydrous Minerals on the Melting Behaviour of Rocks at High Temperatures and Pressures

The experimental study on the melting of potassic basalt and eclogite with about 2% waterat 800-1300℃ and 1.0-3.5 GPa shows that the solidi of both rocks are significantly lower thanthose obtained from the previous experiments of the same type of rocks under dry conditions,and the former which is enriched in potassium has a lower melting point than the latter. It is con-sistent with the previous study. The melting temperature of eclogite increases with pressure,whereas potassic basalt has similar properties only at 1.5—2.5 GPa and>3.0 GPa, and at 2.5—3.0 GPa the melting temperature decreases with pressure. This can be explained as follows: (1)eclogite only has one hydrous mineral amphibole and the dehydous temperature is lower than thewet solidus of the rock. (2) Amphibole exists in potassic basalt at the pressures lower than 2.5GPa and phlogopite exists at pressures higher than 2.5 GPa, and the special compositions of bothminerals determine that amphibole has a dehydration temperature higher than or close to that ofthe wet solidus of the rocks, while phlogopite has a dehydration temperature lower than that ofthe wet solidus. On the other hand the features of the continuous solidus in the experiment ofhydrous eclogite were produced by the fact that the dehydration temperature of its amphibolelower than or close to the melting temperature of the hydrous conditions. So the melting tempera-ture lowers at higher pressures. Therefore, the composition of the rocks in the lithosphere and thetypes of hydrous minerals and their stable P-T conditions are the important factors controllingthe solidi of rocks. It can quite well explain the partial melting of rocks and the origin of the lowvelocity zone in the deep lithosphere.     

Impact-induced melting of Archean granulites in the Vredefort Dome, South Africa. I: anatexis of metapelitic granulites

Mid‐crustal Archean pelitic granulites in the Vredefort Dome experienced a static, low‐P granulite facies overprint associated with the formation of the dome by meteorite impact at 2.02 Ga. Heating and exhumation were virtually instantaneous, with the main source of heat being provided by energy released from nonadiabatic decay of the impact shock wave. Maximum temperatures within a radius of a few kilometres of the centre of the structure exceeded 900 °C and locally even exceeded 1350 °C. This led to comprehensive melting of the precursor Archean granulite assemblages (Grt + Bt + Qtz + Pl + Ksp ± Crd ± Opx ± Sil) followed by peritectic crystallization of aluminous alkali feldspar+Crd + Spl ± Crn ± Sil parageneses and the segregation of small, evolved, biotite leucogranite bodies. However, at a distance of c. 6 km from the centre pre‐impact rock features are largely preserved, although partial replacement of garnet by symplectitic coronas of Crd + Opx ± Spl ± Pl and biotite by orthopyroxene indicate that peak temperatures approached 775 ± 50 °C. Thin interstitial moats of K‐feldspar are closely associated with the orthopyroxene coronas; they are interpreted as the remnants of low‐proportion partial melts generated by biotite breakdown. Both the textures and mineral compositional data support reduced equilibration volumes in these rocks, which reflect rapid isobaric cooling following shock heating and exhumation. The high temperatures and strong lateral thermal gradient are consistent with the modelled impact‐induced isotherm pattern for a 200–300 km diameter impact crater.     

高温高压下含水矿物对岩石熔点影响的实验研究

在温度约800—1300℃和压力1.0—3.5GPa下,对加入约2％水的钾质玄武岩和榴辉岩样品的熔融实验研究结果表明,两种岩石的固相线都明显低于干体系同类成分岩石熔融实验研究获得的固相线温度;其中前者由于相对富钾其熔点总体上又低于后者,与已有的研究资料一致。不同的是榴辉岩是随着压力的增大熔点温度增高,钾质玄武岩仅在1.5—2.5GPa和大于3.0GPa压力时其熔点随着压力的增大而增高,在2.5—3.0GPa压力范围内则相反。笔者认为这是由于钾质玄武岩在压力2.5GPa以下,存在着角闪石,2.5GPa以上存在金云母所致,二者矿物特定的成分决定了角闪石具有高于(或接近于)而金云母具有低于湿体系固相线的脱水温度;而含水榴辉岩实验的连续固相线特征则是其角闪石的脱水温度低于或接近含水条件的熔点温度所致。从而造成高压条件下岩石熔点的降低。因此,岩石圈中岩石的成分及其所决定的含水矿物类型和稳定温压条件是控制岩石固相线形式的重要因素,并可以很好地解释深部岩石的部分熔融和地震波低速带的成因。