P‐wave transmission across fractures with nonlinear deformational behaviour

Stress wave attenuation across fractured rock masses is a great concern of underground structure safety. When the wave amplitude is large, fractures experience nonlinear deformation during the wave propagation. This paper presents a study on normal transmission of P‐wave across parallel fractures with nonlinear deformational behaviour (static Barton–Bandis model). The results show that the magnitude of transmission coefficient is a function of incident wave amplitude, nondimensional fracture spacing and number of fractures. Two important indices of nondimensional fracture spacing are identified, and they divide the area of nondimensional fracture spacing into three parts (individual fracture area, transition area and small spacing area). In the different areas, the magnitude of transmission coefficient has different trends with nondimensional fracture spacing and number of fractures. In addition, the study reveals that under some circumstances, the magnitude of transmission coefficient increases with increasing number of fractures, and is larger than 1. Copyright © 2006 John Wiley & Sons, Ltd.     

The response of an elastic half‐space under a momentary shear line impulse

The response of an ideal elastic half‐space to a line‐concentrated impulsive vector shear force applied momentarily is obtained by an analytical–numerical computational method based on the theory of characteristics in conjunction with kinematical relations derived across surfaces of strong discontinuities. The shear force is concentrated along an infinite line, drawn on the surface of the half‐space, while being normal to that line as well as to the axis of symmetry of the half‐space. An exact loading model is introduced and built into the computational method for this shear force. With this model, a compatibility exists among the prescribed applied force, the geometric decay of the shear stress component at the precursor shear wave, and the boundary conditions of the half‐space; in this sense, the source configuration is exact. For the transient boundary‐value problem described above, a wave characteristics formulation is presented, where its differential equations are extended to allow for strong discontinuities which occur in the material motion of the half‐space. A numerical integration of these extended differential equations is then carried out in a three‐dimensional spatiotemporal wavegrid formed by the Cartesian bicharacteristic curves of the wave characteristics formulation. This work is devoted to the construction of the computational method and to the concepts involved therein, whereas the interpretation of the resultant transient deformation of the half‐space is presented in a subsequent paper. Copyright © 2003 John Wiley & Sons, Ltd.     

The grain-size characteristics of Quaternary deposits at Xingshan near Siping in Jilin province, China

This research paper analyses the grain-size characteristics of the Quaternary deposits at Xingshan near Siping, Jilin province in China by employing graphic measures to study the grain size distribution and its mode of transport and deposition. The Quaternary deposits at Xingshan lie unconformable on Cretaceous rocks made of siltstone, mudstone and sandstone. The average grain size is between 8.06 to 8.55Φ (0.002 6 ～0.003 7 mm). The Quaternary deposits at Xingshan mainly compose of very fine silt to clay. The compositions of the grade are clay 63% and silt 37%. The clay size components are weathered debris transported and deposited by flowing water from the SE highlands or hills to the low lying NW Xingshan plains whereas the silty components accumulated by aoelian process. The Quaternary deposits at Xingshan accumulated in the middle and late Pleistocene interglacial periods from (459.12～39.03) ka to (88.92～7.56) ka. The standard deviation ranged from 0.96 to 1.36Φ, indicating that the sediments are moderately to poorly sorted, Coefficient of skewness ranged from 0.16～0.31 with an average skewness of 0.218, (Positively skewed towards fine). Kurtosis values (0.84～1.05) from the grain size distribution and visual inspection of the frequency curves indicate platykurtic to mesokurtic curves and unimodal to bimodal grain-size distribution. The type of deposit formation is sand dune and the source is at a distal from its provenance.     

Short-term Climate Characteristics at Ny-(A)lesund over the Arctic Tundra Area

Based on the Germany Koldwey Station's 1994-2003 conventional observation hourly data, this paper conducts a statistical analysis on the short-term climate characteristics for an arctic tundra region (Ny-(A)lesund island) where our first arctic expedition station (Huanghe Station) was located. Affected by the North Atlantic warming current, this area has a humid temperate climate, and the air temperature at Ny-(A)lesund rose above 0 ℃ even during deep winter season during our research period. The wind speed in this area was low and appeared most at southeast direction. We find that the temperature at Ny-(A)lesund rose in the faster rate (0.68 ℃/10 a) than those at the whole Arctic area. Compared with the floating ices where our expedition conducted in the Arctic, Ny-(A)lesund was warmer and more humid and had lower wind speed. Comparison of the near surface air temperature derived by NCEP/NCAR reanalysis to the conventional measurements conducted at the Koldwey site in Ny-(A)lesund area shows a good agreement for winter season and a significant difference for summer season.     

Quick-look assessments to identify optimal CO2 EOR storage sites

A newly developed, multistage quick-look methodology allows for the efficient screening of an unmanageably large number of reservoirs to generate a workable set of sites that closely match the requirements for optimal CO₂ enhanced oil recovery (EOR) storage. The objective of the study is to quickly identify miscible CO₂ EOR candidates in areas that contain thousands of reservoirs and to estimate additional oil recovery and sequestration capacities of selected top options through dimensionless modeling and reservoir characterization. Quick-look assessments indicate that the CO₂ EOR resource potential along the US Gulf Coast is 4.7 billion barrels, and CO₂ sequestration capacity is 2.6 billion metric tons. In the first stage, oil reservoirs are screened and ranked in terms of technical and practical feasibility for miscible CO₂ EOR. The second stage provides quick estimates of CO₂ EOR potential and sequestration capacities. In the third stage, a dimensionless group model is applied to a selected set of sites to improve the estimates of oil recovery and storage potential using appropriate inputs for rock and fluid properties, disregarding reservoir architecture and sweep design. The fourth stage validates and refines the results by simulating flow in a model that describes the internal architecture and fluid distribution in the reservoir. The stated approach both saves time and allows more resources to be applied to the best candidate sites.     

南海沉积岩芯的地球化学研究

本文对南海中部陆坡区和海盆区的5个岩芯中的 Si,Al,Fe,Mn,Ca,Mg 和 CaCO_3成分做了分析,并对其分布特征与有关影响因素进行了讨论。受沉积区环境差异的影响,元素的分布具有区域性特征;受海区特定地理位置的影响,元素的分布呈现出过渡性特征(浅海到大洋的过渡);受沉积过程中环境变化的影响,元素的分布展示了周期性变化或旋回性。根据岩芯中元素的分布特征,并参考有关古地磁,氧碳同位素和钙质超微化石的测试分析结果,将本区岩芯划分为14层地球化学层,并将本区划分为两个沉积地球化学区,揭示了早更新世以来本区沉积环境的变化和存在的两种沉积模式。     

鄂尔多斯盆地黄陵、东胜地区地温场对比

鄂尔多斯盆地黄陵、东胜铀矿区分别处于盆地南部渭北隆起的北侧边缘和盆地北部伊盟隆起的东部,赋矿层位都是中侏罗统直罗组。盆地南、北铀矿区在现今地温场及古地温场都存在明显差异,南部现今大地热值及热演化程度明显高于北部。对于下侏罗统延安组和石炭—二叠系煤层,黄陵地区镜质体反射率都高于东胜地区。通过镜质体反射率资料得出同一埋深的一套地层经历的最大古地温和对应的古地温梯度也有南部高于北部的现象。由于早白垩世后期盆地普遍整体抬升使得现今地温相对古地温降低,南部黄陵地区抬升剥蚀量大于北部东胜地区,导致古、今地温差异也大于后者。盆地南部庆阳—富县一带局部构造热运动,导致南部异常地温场的形成,使得南部热演化程度高于北部。     

江西省安福地区地热水化学特征研究

为研究江西安福地区水文地球化学特征及控制因素, 本文采集了15组样品, 采用水化学、同位素分析等方法进行研究。结果表明: 研究区地热水以Na-HCO3型水为主, 地下水以HCO3-Na·Ca型为主, 地表水由西南向东北从HCO3-Na·Ca向HCO3-Ca型水演化。水化学组分演化过程主要受岩石风化作用控制, 地层封闭性较差, 水中的Na+、HCO– 3、Sr2+来源于硅酸岩风化溶解。由稳定同位素特征可知, 研究区地热水补给来源为大气降水。研究区热储温度为49.8~101.4 ℃, 地热水循环深度为1 502.6~1 513.6 m。热水在沿断裂带上升过程中与浅层冷水发生混合, 其混合比例为76.1%~87.5%。研究成果为安福地区水循环演化提供依据, 有利于地热资源的合理开采与保护。