Geochemical survey of thermal system in Northeast China and their geothermometric characters

The chemical composition of several thermal springs around Changbaishan area has been investigated. Cenozoic basaltic rocks are widely distributed in Northeast China and geothermal characteristics have been described. About one hundred hot springs exist around Changhaishan Volcano at the border between China and D.P.R.Korea with high temperature about 82~C. The pH values of the spring water range from 6.9 to 7.1 and the total flow rate is about 4.8 L/sec. The chemical composition of the thermal springs is sodium carbonate; the high-mineral contents of thermal water are believed to have medicinal properties. Bathhouses are already built along the hot springs to take the advantage of the supposed healing properties. The high quality of those hot springs is believed to be utilitized for mineral water. The chemical equilibrium temperatures were estimated at about 160℃ based on the Na-K-Ca geochemical thermometer.     

隧道工程地质评价的内容和方法

结合工程隧道实际,首先阐述了隧道工程的基本地质环境和工程地质条件,然后针对隧道工程可能出现的不良地质现象和可采取的工程措施,从大气降水、围岩稳定、围岩压力、洞口稳定、隧道比选等角度探讨隧道工程地质评价的主要方法和一般内容,进行隧道工程地质评价,为隧道施工、支护提供了依据.     

含有集约束向量极值问题的最优性条件

在序线性拓扑空间里研究了含有集约束向量极值问题的最优性条件,并建立了充分性和必要性条件.     

八庙—青山金红石矿床化学成分与成矿关系

本矿床是我国金红石矿床重要的成因及工业类型，为具有特定化学成分的岩石在特定变质条件下形成的。本文通过对大量数据的处理，查明了化学成分与成矿的关系：高Ａｌ２Ｏ３、ＭｇＯ、Ｆｅ２Ｏ３＋ＦｅＯ、Ｋ２Ｏ、Ｐ２Ｏ５、Ｈ２Ｏ＋、ＭｎＯ，低ＳｉＯ２、ＣａＯ、Ｎａ２Ｏ、ＣＯ２、Ｓ等，利于钛富集；高ＴｉＯ２、ＭｇＯ、Ｐ２Ｏ５、Ｓ，低ＳｉＯ２、ＣａＯ、Ｋ２Ｏ、Ａｌ２Ｏ３、Ｆｅ２Ｏ３／ＦｅＯ，利于金红石形成；高Ｓｃ、Ｚｒ、Ｎｉ、Ｚｎ及Ｌａ／Ｙｂ，低Ｙ、Ｎｂ、Ｔｈ、Ｃｄ、Ｂａ、Ｂｅ、ΣＲＥＥ，利于金红石纯度提高。对研究矿床成因及寻找新的同类矿床等有重要意义     

济南市地下水资源现状分析及开发利用建议

本文采用较新的统计资料,对济南市地下水资源的开发利用现状及开采潜力,以行政区划为单元进行了分析论证.针对地下水资源开发利用中存在的环境水文地质问题,提出了开发利用规划和建议.     

The second order characteristic condition for plastic flow

In this paper the second order characteristic (discontinuous bifurcation) condition is derived for the granular flow (fully plastic) equations. This second order bifurcation equation is shown to be formally identical to the first order localization requirement during steady elastoplastic deformation provided the elastic compliance tensor is substituted for the product of the plastic multiplier with the flow Hessian. For isotropic yield and flow functions the invariant form of the characteristic condition is given in detail, as well as an alternative expression in adapted co‐ordinates. The characteristic condition can be regarded as defining a hardening function which is maximized to identify the critical angles. When the method is applied to 3D Coulomb flow, Mohr's 3D fracture plane conditions are obtained uniquely. Copyright © 2003 John Wiley & Sons, Ltd.     

胶东温泉的地热属性与可持续开发对策

从胶东所处的板块构造位置和区域控热构造入手,根据地热传导理论,对胶东温泉的地热属性进行分析研究,认为胶东半岛温泉地热属性为毗邻板块边缘高温地热带的板内中低温地热系统,它以偏高的大地热流值为地热背景,以局部控热构造聚敛的大地热流为热源,以地形高差影响和相应的水力压差作用为动力,入渗的大气降水被岩石中的热量加热,并沿断裂出露形成温泉地热水。根据山东半岛温泉地热属性的特点和地热水开发中所面临的问题,提出保持胶东温泉可持续开发的相关对策。     

Fast iterative solution of large undrained soil‐structure interaction problems

In view of rapid developments in iterative solvers, it is timely to re‐examine the merits of using mixed formulation for incompressible problems. This paper presents extensive numerical studies to compare the accuracy of undrained solutions resulting from the standard displacement formulation with a penalty term and the two‐field mixed formulation. The standard displacement and two‐field mixed formulations are solved using both direct and iterative approaches to assess if it is cost‐effective to achieve more accurate solutions. Numerical studies of a simple footing problem show that the mixed formulation is able to solve the incompressible problem ‘exactly’, does not create pressure and stress instabilities, and obviate the need for an ad hoc penalty number. In addition, for large‐scale problems where it is not possible to perform direct solutions entirely within available random access memory, it turns out that the larger system of equations from mixed formulation also can be solved much more efficiently than the smaller system of equations arising from standard formulation by using the symmetric quasi‐minimal residual (SQMR) method with the generalized Jacobi (GJ) preconditioner. Iterative solution by SQMR with GJ preconditioning also is more elegant, faster, and more accurate than the popular Uzawa method. Copyright © 2003 John Wiley & Sons, Ltd.     

PVC-U塑料管在浅层地热能地下水资源开发工程中应用与研究

PVC-U塑料管具有耐腐蚀、不结垢、质量轻、使用寿命长等特点。将其应用于浅层地热能开发和供水管井工程中,不但可以解决金属井管腐蚀破裂、结垢和水源热泵回灌难等问题,而且还减少了水井维修费用、延长其使用寿命。结合河南郑州实施的437、400 m两眼浅层地热能开发和供水管井示范工程实践,详细论述了PVC-U塑料管成井工艺、存在问题及解决方法的研究成果。