Optimization of grid-drilling using computer simulation

A computer simulation method has been developed to find efficient drilling grids for mineral deposits. A well-known ore deposit is used as a model to develop an efficient pattern for undiscovered ore bodies in the same area or in other prospects where similar geometry is suspected. The model for this study is the Austinville, Virginia deposit, a Mississippi Valley-type deposit composed of 17 ore bodies totaling 34 million short tons (30 million metric tons). The method employs a computer program that simulates drilling the model deposit with different patterns, including various levels of follow-up drilling. Follow-up holes are drilled in fences at one half the original spacing around holes in the grid that show ore-grade mineralization. Each pattern is drilled 100 times from random starting locations to provide a range of outcomes of drilling, including the best, worst, and most likely. For this study, patterns of 100 drill holes were composed of 10 fences spaced 1000–5000 feet (305–1524 m) apart, each with 10 holes spaced 200–1000 feet (61–305 m) apart. In all, 25 grids were used with zero to three levels of follow-up drilling. The 600/2000 grid, with drill holes spaced 600 feet (183 m) apart in fences spaced 2000 feet (610 m) apart, was compared with the 200/5000 grid because they represented contrasting outcomes. The 600/2000 grid penetrated many ore bodies consistently but with few multiple hits to individual ore bodies; whereas the 200/5000 grid inconsistently penetrated few ore bodies with many multiple hits. The 600/2000 grid was more efficient than the 200/5000 grid at hitting large ore bodies of 1,000,000 short tons or greater (900,000 metric tons or greater) and was made more effective by adding one cycle of follow-up drilling. The 600/2000 grid had a 97% chance of hitting one or more large ore bodies with at least one drill hole per ore body, and the 200/5000 grid had a 64% chance. Once hit, there was an 82% chance that the largest ore body would be penetrated by three or more holes when using the 600/2000 grid and an 88% chance using the 200/5000 grid.     

胜利二号极浅海步行坐底式钻井平台防腐措施研究

本文根据胜利二号极浅海步行坐底钻井平台的作业和工作环境特点，进行了防腐措施研究，设计了切合实际的防腐措施。该平台在海上作业近四年进坞修理，经观测防腐情况良好。     

区域地质灾害危害程度等级划分探讨

区域性地质灾害危害程度等级尚无比较科学的划分方法。通过福建省区域地质灾害危害程度等级划分的探讨,采用单位面积地质灾害造成的人员死亡数、财产损失值作为“地质灾害模数”,对区域地质灾害危害程度等级进行划分,判别不同区域地质灾害严重程度,为区域地质灾害防治决策提供科学依据。     

基于LongruanGIS的电子地质报告系统的设计与实现

基于LongruanGIS3．0开发的电子地质报告系统包括数据库管理系统、图形处理系统和文字表格处理系统三部分。在介绍该系统的总体设计、功能实现和系统特点的基础上,总结了该软件的几方面优势：具有数据共享、数据集成、自动成图、功能开放的技术优势;具有开放的数据交换格式以及将CAD与GIS软件结合起来的强大图形编辑、查询、空间分析功能。     

焦作-郑州天然气输气管道工程地质灾害防治措施及防治建议

焦作-郑州天然气输气管道是较重要建设项目,输气管道起自焦作市博爱县磨头镇,南止郑州市惠济区古荥镇,该输气管道沿线地质环境条件复杂程度为简单-中等。地质灾害类型主要为崩塌、地裂缝、地面不均匀沉陷,黄土湿陷和沙土液化等地质灾害。工程建设有引发和加剧崩塌灾害的可能性,有遭受地质灾害的危险性。工程建设过程中应针对不同的灾害类型采取适当的预防或治理措施。     

临港新城地质特征及其对新城规划与建设的影响分析

结合临港新城三维地质调查所取得的成果,分析了该城区地质特征及对新城建设的影响,为新城规划建设提供科学依据和服务。     

随钻测录井地质导向二维分解实时绘图方法

根据随钻测录井实时地质导向和大斜度、水平井评价成图技术需求，针对传统绘图方法存在的弊端，提出了将测录井信息、井眼轨迹和地质模型进行二维分解的实时绘图方法。针对二维分解绘图方法绘图时空复杂度较高的问题，给出了不同事件驱动下的局部实时计算和拷屏重绘算法，控制了对CPU和内存的消耗、提高了绘图效率，消除了实时绘图的闪烁和卡顿现象。应用实例表明，二维分解实时绘图方法能够实现大尺度随钻测录井地质导向图形的流畅、无卡顿实时绘图，可提高大斜度、水平井储层模型评价的刻画精度和时效。     

虚拟样机技术在地质工程机械领域的应用研究

基于对国内地质工程机械的研发现状的考虑，根据虚拟样机技术的特点，讨论了在地质工程机械领域实施虚拟样机技术的必要件，并提出了建立地质工程机械虚拟样机的策略。联合PRO／E、ANSYS及ADAMS建立了气动潜孔锤的虚拟样机模型，对气动潜孔锤虚拟样机进行了仿真，阐明了虚拟样机技术在地质工程机械领域的应用前景。     

老柞山金矿田鸡爪沟金矿床地质特征及成因探讨

分析了鸡爪沟金矿床地质特征和成因 ,并对形成过程进行理论推导 ,认为该矿床为与火山作用有关的中温岩浆热液充填型矿床。     

Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.