基于J2EE架构的企业卡资源管理系统的设计与实现

介绍了J2EE架构和多层体系结构的发展，在B／S三层架构的基础上给出了包含应用服务器中间件的多层分布式应用体系结构，并把此体系结构应用于电信氽业的有价卡管理系统项目中。分析了此项同的功能结构和体系结构，采用J2EE开发平台和技术设计实现了由浏览器、Web服务器、应用服务器、数据库服务器组成的多层体系架构。     

Alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands)

Ancient fluvial successions often act as hydrocarbon reservoirs. Sub‐surface data on the alluvial architecture of fluvial successions are often incomplete and modelling is performed to reconstruct the stratigraphy. However, all alluvial architecture models suffer from the scarcity of field data to test and calibrate them. The purposes of this study were to quantify the alluvial architecture of the Holocene Rhine–Meuse delta (the Netherlands) and to determine spatio‐temporal trends in the architecture. Five north–south orientated cross‐sections, perpendicular to the general flow direction, were compiled for the fluvial‐dominated part of the delta. These sections were used to calculate the width/thickness ratios of fluvial sandbodies (SBW/SBT) and the proportions of channel‐belt deposits (CDP), clastic overbank deposits (ODP) and organic material (OP) in the succession. Furthermore, the connectedness ratio (CR) between channel belts was calculated for each cross‐section. Distinct spatial and temporal trends in the alluvial architecture were found. SBW/SBT ratios decrease by a factor of ca 4 in a downstream direction. CDP decreases from ca 0·7 (upstream) to ca 0·3 (downstream). OP increases from less than 0·05 in the upstream part of the delta to more than 0·25 in the downstream delta. ODP is approximately constant (0·4). CR is ca 0·25 upstream, which is approximately two times larger than in the downstream part of the delta. Furthermore, CDP in the downstream Rhine–Meuse delta increases after 3000 cal yr BP. These trends are attributed to variations in available accommodation space, floodplain geometry and channel‐belt size. For instance, channel belts tend to narrow in a downstream direction, which reduces SBW/SBT, CDP and CR. Tectonics cause local deviations in the general architectural trends. In addition, the positive correlation between avulsion frequency and the ratio of local to regional aggradation rate probably influenced alluvial architecture in the Rhine–Meuse delta. The Rhine–Meuse data set can be a great resource when developing more sophisticated models for alluvial architecture simulation, which eventually could lead to better characterizations of hydrocarbon reservoirs. To aid such usage of the Rhine–Meuse data set, constraints for relevant parameters are provided at the end of the paper.     

Reducing fishing vessel fuel consumption and NOX emissions

There is a growing concern with the impact of marine operations on the environment. This requires reducing fuel consumption and vessel pollution during operation. On-board computers and satellite communications will enable the operator to reduce fuel consumption and NO_X emissions during vessel operations.This paper presents the results of a study on this problem and how such an on-board system could be implemented to reduce fuel consumption and engine NO_X emissions.     

“数字海底”系统建模中的关键技术研究

基于“数字海底”系统的理论基础研究和在海底科学应用中的具体实践,提出了“数字海底”的涵义、系统组成和体系结构,对空间数据管理技术、基于XML的WebGIS空间数据表达技术、复杂海底三维建模技术、多源信息的一体化集成显示技术、虚拟现实技术等“数字海底”系统建模中的关键技术进行了探讨,为从事海底资源研究和开发的人员提供各个层次的参考或帮助.     

基于工作流技术的社区管理系统的设计

分析了基于工作流技术管理系统软件的优势,阐述了数字社区的应用软件和工作流引擎整合的通用途径,并设计了一个基于工作流的应用系统。实验表明,结合知识库、规则库的应用软件可以极大地提升数字社区管理软件的应用水平。     

A sequence stratigraphic model for an intensely bioturbated shallow-marine sandstone: the Bridport Sand Formation, Wessex Basin, UK

The Bridport Sand Formation is an intensely bioturbated sandstone that represents part of a mixed siliciclastic‐carbonate shallow‐marine depositional system. At outcrop and in subsurface cores, conventional facies analysis was combined with ichnofabric analysis to identify facies successions bounded by a hierarchy of key stratigraphic surfaces. The geometry of these surfaces and the lateral relationships between the facies successions that they bound have been constrained locally using 3D seismic data. Facies analysis suggests that the Bridport Sand Formation represents progradation of a low‐energy, siliciclastic shoreface dominated by storm‐event beds reworked by bioturbation. The shoreface sandstones form the upper part of a thick (up to 200 m), steep (2–3°), mud‐dominated slope that extends into the underlying Down Cliff Clay. Clinoform surfaces representing the shoreface‐slope system are grouped into progradational sets. Each set contains clinoform surfaces arranged in a downstepping, offlapping manner that indicates forced‐regressive progradation, which was punctuated by flooding surfaces that are expressed in core and well‐log data. In proximal locations, progradational shoreface sandstones (corresponding to a clinoform set) are truncated by conglomerate lags containing clasts of bored, reworked shoreface sandstones, which are interpreted as marking sequence boundaries. In medial locations, progradational clinoform sets are overlain across an erosion surface by thin (<5 m) bioclastic limestones that record siliciclastic‐sediment starvation during transgression. Near the basin margins, these limestones are locally thick (>10 m) and overlie conglomerate lags at sequence boundaries. Sequence boundaries are thus interpreted as being amalgamated with overlying transgressive surfaces, to form composite erosion surfaces. In distal locations, oolitic ironstones that formed under conditions of extended physical reworking overlie composite sequence boundaries and transgressive surfaces. Over most of the Wessex Basin, clinoform sets (corresponding to high‐frequency sequences) are laterally offset, thus defining a low‐frequency sequence architecture characterized by high net siliciclastic sediment input and low net accommodation. Aggradational stacking of high‐frequency sequences occurs in fault‐bounded depocentres which had higher rates of localized tectonic subsidence.     

滇黔桂盆地及其邻区石炭纪至二叠纪层序地层格架及三级海平面变化的全球对比

属于被动大陆边缘裂谷盆地的滇黔桂盆地，自加里东运动之后，泥盆纪开始拉开，整个晚古生代延续发展。受同生断裂的控制，在深水盆地中发育大小不等的孤立碳酸盐台地，因而在滇黔桂盆地及其邻区形成特殊的“台-盆-丘-槽”的古地理格局。对不同古地理背景下的典型剖面进行三级层序划分并对其进行空间追索和对比，在滇黔桂盆地及其邻区的石炭纪和二叠纪地层中可以识别出12个三级层序，相当于晚古生代25个三级沉积层序(2-5Ma；SQ1至SQ25)中的SQ24至SQ25；以地层记录中的的两种相变面和两种穿时性为基本要素，可以建立研究区石炭系和二叠系的层序地层格架；层序地层格架反映了三级层序的基本特征：空间上相序的有序性和时间上环境变化的同步性。研究区的石炭系和二叠系，主要为一套碳酸盐岩地层，其中在连陆台地上发育3套煤系地层，它们分别组成石炭纪三级层序SQ15跨系的三级层序SQ19的HST以及二叠纪吴家坪期的三级层序SQ24；而且在连陆台地边缘和孤立台地上，于阳新世的茅口亚世以及乐平世的长兴期发育海绵生物礁，海绵生物礁分别构成了以下二叠系三级层序即阳新世的SQ22和SQ23以及长兴期的SQ25。3套煤系地层和两套海绵生物礁的发育，使研究区的石炭系和二叠系形成了一个与欧美地区完全不同的层序地层序列。在研究区石炭系和二叠系所识别出的12个三级层序中，石炭纪一二叠纪船山世地层可以划分出6个三级层序。这种划分与Busch等对北美相同层位的划分相似，也就是说该6个三级层序的形成时限大于10Ma；较长的形成时限可能反映了形成在联合古陆汇聚时期即全球构造相对稳定时期三级海平面变化的一个特性。因此，研究区的石炭系和二叠系所识别和划分出的12个三级层序，其数量比Ross和Ross(1985)对欧美地区石炭系和二叠系所划分出的50多个三级层序要少得多。     

鄂尔多斯盆地上古生界高分辨率层序地层分析

按基准面旋回原理，将鄂尔多斯盆地上古生界本溪组（C2b)、太原组（P1t）、山西组(P1s)和下石盒子组（P1xs)划分为3个超长期、8个长期、19个中期和62个短期旋回层序：较为详细地介绍了各级别层序的结构类型、叠加样式和沉积演化序列；建立以长期旋回层序为年代地层框架，中期旋回层序为等时地层对比单元的层序的地层格架；并讨论高分辨率层序地层与天然气藏的关系。     

Spatial variation of overbank aggradation rate and its influence on avulsion frequency

Abstract River avulsions are commonly considered to be driven by the aggradation and growth of alluvial ridges, and the associated increase in cross‐valley slope relative to either the down‐channel slope or the down‐valley slope (the latter is termed the slope ratio in the present paper). Therefore, spatial patterns of overbank aggradation rate over stratigraphically relevant time scales are critical in avulsion‐dominated models of alluvial architecture. Detailed evidence on centennial‐ to millennial‐scale floodplain deposition has, to date, been largely unavailable. New data on such long‐term overbank aggradation rates from the Rhine–Meuse and Mississippi deltas demonstrate that the rate of decrease of overbank deposition away from the channel belt is much larger than has been supposed hitherto, and can be similar to observations for single overbank floods. This leads to more rapid growth of alluvial ridges and more rapid increase in slope ratios, potentially resulting in increased avulsion frequencies. A revised input parameter for overbank aggradation rate was used in a three‐dimensional model of alluvial architecture to study its effect on avulsion frequency. Realistic patterns of avulsion and interavulsion periods (≈1000 years) were simulated with input data from the Holocene Rhine River, with avulsions occurring when the slope ratio is in the range 3–5. However, caution should be practised with respect to uncritical use of these numbers in different settings. Evidence from the two study areas suggests that the avulsion threshold cannot be represented by one single value, irrespective of whether critical slope ratios are used, as in the present study, or superelevation as has been proposed by other investigators.     

Sub-wavebase cross-bedded grainstones on a distally steepened carbonate ramp, Upper Miocene, Menorca, Spain

Cross‐bedded grainstones on carbonate ramps and shelves are commonly related to the locus of major wave energy absorption such as shorelines, shoals or shelf breaks. In contrast, on the Early Tortonian carbonate platform of Menorca (Balearic Islands), coarse‐grained, cross‐bedded grainstones are found at a distance from the palaeoshoreline where they were deposited below the wavebase. Excellent exposures along continuous outcrops on the sea cliffs of Menorca reveal the depositional profile and three‐dimensional distribution of the different facies belts of the Tortonian ramp depositional system. Basinward from the palaeoshoreline, fan deltas and beach deposits pass into 5‐km‐wide gently dipping bioturbated dolopackstone (inner and middle ramp), then into 12–20°‐dipping dolograinstone/rudstone clinobeds (ramp slope) and, finally, into subhorizontal fine‐grained basinal dolowackestone to dolopackstone (outer ramp). In this Miocene example, coarse‐grained grainstones exist in five different settings other than beach deposits: (1) on the middle ramp, where cross‐bedded grainstones were deposited by currents roughly parallel to the shoreline at 40–70 m estimated water depth and are interbedded with gently dipping bioturbated dolomitized packstones; (2) on the upper slope, where clinobeds are composed mostly of in situ rhodoliths and red‐algae fragments; (3) on the lower slope, as small‐scale bedforms (small three‐dimensional subaqueous dunes) migrating parallel to the slope; (4) at the transition between the lower slope and the outer ramp, where mollusc‐rich and rhodolithic rudstones and grainstones, interbedded in dolomitized laminated wackestones containing abundant planktonic foraminifera, infill slide/slump scars as upslope‐backstepping bodies (backsets); (5) at the toe of the slope, where coarse skeletal grainstones indicate bedform migration parallel to the platform margin, induced by currents at more than 150 m estimated water depth. This Late Miocene example also illustrates how changes in intrabasinal environmental conditions (nutrients and/or temperature) may produce changes in stratal patterns and facies architecture if they affect the biological system. Two depositional sequences compose the Miocene platform on Menorca, where a reef‐rimmed platform prograded onto an earlier distally steepened ramp. The transition from the ramp to the reef‐rimmed platform was effected by an increase in accommodation space caused by ecological changes, promoting a shift from a grain‐ to a framework‐producing biota.